2024-03-26 Android8.1 px30 WI-FI 模块rtl8821cu调试记录

一、kernel 驱动，我这里使用v5.8.1.2_35530.20191025_COEX20191014-4141这个版本，下载这个版本的驱动可以参考下面的文章。

2021-04-12 RK3288 Android7.1 USB wifi bluetooth 模块RTL8821CU 调试记录_rk平台rtl8821cu蓝牙调试-CSDN博客

二、Makefile文件需要修改下面的内容。

三、加载wifi模块ko文件，ifconfig wlan0 up后发现执行wpa_cli -i wlan0 scan是会提示Failed to connect to non-global ctrl_ifname: wlan0  error: Connection refused的。insmod模块的时候会打印一些串口信息，有一些error，但是不影响。

$ [   78.786022] type=1400 audit(1711362065.983:75): avc: denied { write } for pid=1753 comm="grep" path="pipe:[28664]" dev="pipefs" ino=28664 scontext=u:r:shell:s0 tcontext=u:r:adbd:s0 tclass=fifo_file permissive=1
[   78.786071] type=1400 audit(1711362080.473:76): avc: denied { module_load } for pid=1764 comm="insmod" path="/vendor/lib/modules/wifi/8821cu.ko" dev="mmcblk1p13" ino=219 scontext=u:r:su:s0 tcontext=u:object_r:vendor_file:s0 tclass=system permissive=1
[   78.843111] RTW: module init start
[   78.843159] RTW: rtl8821cu v5.8.1.2_35530.20191025_COEX20191014-4141
[   78.843167] RTW: build time: Mar 25 2024 18:14:42
[   78.843174] RTW: rtl8821cu BT-Coex version = COEX20191014-4141
[   78.843232] RTW: rtw_inetaddr_notifier_register
[   78.843357] RTW:
[   78.843357] usb_endpoint_descriptor(0):
[   78.843377] RTW: bLength=7
[   78.843384] RTW: bDescriptorType=5
[   78.843390] RTW: bEndpointAddress=84
[   78.843396] RTW: wMaxPacketSize=512
[   78.843402] RTW: bInterval=0
[   78.843409] RTW: RT_usb_endpoint_is_bulk_in = 4
[   78.843415] RTW:
[   78.843415] usb_endpoint_descriptor(1):
[   78.843423] RTW: bLength=7
[   78.843429] RTW: bDescriptorType=5
[   78.843435] RTW: bEndpointAddress=5
[   78.843441] RTW: wMaxPacketSize=512
[   78.843447] RTW: bInterval=0
[   78.843453] RTW: RT_usb_endpoint_is_bulk_out = 5
[   78.843459] RTW:
[   78.843459] usb_endpoint_descriptor(2):
[   78.843468] RTW: bLength=7
[   78.843474] RTW: bDescriptorType=5
[   78.843480] RTW: bEndpointAddress=6
[   78.843491] RTW: wMaxPacketSize=512
[   78.843497] RTW: bInterval=0
[   78.843503] RTW: RT_usb_endpoint_is_bulk_out = 6
[   78.843509] RTW:
[   78.843509] usb_endpoint_descriptor(3):
[   78.843517] RTW: bLength=7
[   78.843523] RTW: bDescriptorType=5
[   78.843529] RTW: bEndpointAddress=87
[   78.843535] RTW: wMaxPacketSize=64
[   78.843541] RTW: bInterval=3
[   78.843548] RTW: RT_usb_endpoint_is_int_in = 7, Interval = 3
[   78.843554] RTW:
[   78.843554] usb_endpoint_descriptor(4):
[   78.843562] RTW: bLength=7
[   78.843568] RTW: bDescriptorType=5
[   78.843574] RTW: bEndpointAddress=8
[   78.843580] RTW: wMaxPacketSize=512
[   78.843586] RTW: bInterval=0
[   78.843592] RTW: RT_usb_endpoint_is_bulk_out = 8
[   78.843599] RTW: nr_endpoint=5, in_num=2, out_num=3
[   78.843599]
[   78.843608] RTW: USB_SPEED_HIGH
[   78.843615] RTW: CHIP TYPE: RTL8821C
[   78.843670] RTW: loadparam, Select P2P interface: iface_id:1
[   78.843721] RTW: [HALMAC]11692M
[   78.843721] HALMAC_MAJOR_VER = 1
[   78.843721] HALMAC_PROTOTYPE_VER = 6
[   78.843721] HALMAC_MINOR_VER = 5
[   78.843721] HALMAC_PATCH_VER = 5
[   78.844995] RTW: Chip Version Info: CHIP_8821C_U5_1T1R_RomVer(4)
[   78.845014] RTW: config_chip_out_EP OutEpQueueSel(0x07), OutEpNumber(3)
[   78.845246] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.103557] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_LOGICAL_EFUSE
[   79.103719] RTW: HW EFUSE
[   79.103768] RTW: 0x000: 29 81 00 BC  09 00 21 00  6E 04 A4 34  10 00 30 0B
[   79.103941] RTW: 0x010: FF FF FF FF  FF FF FF FF  FF FF FF 02  FF FF FF FF
[   79.104108] RTW: 0x020: FF FF 26 26  26 28 27 27  27 26 26 26  25 25 25 26
[   79.104289] RTW: 0x030: 02 FF FF FF  FF FF 00 FF  FF FF 23 22  22 22 23 23
[   79.104473] RTW: 0x040: 2B 2B 2C 2C  2C 02 FF FF  FF FF FF FF  FF FF FF FF
[   79.104657] RTW: 0x050: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.104841] RTW: 0x060: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.105011] RTW: 0x070: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.105176] RTW: 0x080: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.105413] RTW: 0x090: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.105686] RTW: 0x0A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.105852] RTW: 0x0B0: FF FF FF FF  FF FF FF FF  7F 29 20 00  FF FF FF FF
[   79.106042] RTW: 0x0C0: FF 21 00 41  00 00 00 00  00 FF 22 FF  FF FF FF FF
[   79.106224] RTW: 0x0D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.106404] RTW: 0x0E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.106588] RTW: 0x0F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.106754] RTW: 0x100: DA 0B 20 C8  E3 46 02 14  F5 F9 D4 E6  74 09 03 52
[   79.106938] RTW: 0x110: 65 61 6C 74  65 6B 0E 03  38 30 32 2E  31 31 61 63
[   79.107147] RTW: 0x120: 20 4E 49 43  08 03 31 32  33 34 35 36  FF FF FF FF
[   79.107377] RTW: 0x130: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.107556] RTW: 0x140: FF FF FF FF  00 00 31 0F  FF FF FF FF  FF FF FF FF
[   79.107740] RTW: 0x150: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.107923] RTW: 0x160: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.108107] RTW: 0x170: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.108273] RTW: 0x180: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.108498] RTW: 0x190: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.108737] RTW: 0x1A0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.108929] RTW: 0x1B0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.109114] RTW: 0x1C0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.109280] RTW: 0x1D0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.109497] RTW: 0x1E0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.109682] RTW: 0x1F0: FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
[   79.109874] RTW: EEPROM ID = 0x8129
[   79.109895] RTW: EEPROM Version = 0
[   79.109918] RTW: EEPROM Regulatory=0x01
[   79.109937] RTW: EEPROM Board Type=0x01
[   79.110299] RTW: EEPROM Enable BT-coex, ant_num=1
[   79.110346] RTW: hal_com_config_channel_plan chplan:0x7F
[   79.110366] RTW: EEPROM crystal_cap=0x29
[   79.110385] RTW: EEPROM ThermalMeter=0x20
[   79.110404] RTW: EEPROM Customer ID=0x00
[   79.110423] RTW: EEPROM SupportRemoteWakeup=0
[   79.110441] RTW: EEPROM rfe_type=0x22
[   79.110462] RTW: EEPROM PAType_2G is 0x0, ExternalPA_2G = 0
[   79.110483] RTW: EEPROM PAType_5G is 0x0, external_pa_5g = 0
[   79.110504] RTW: EEPROM LNAType_2G is 0x0, ExternalLNA_2G = 0
[   79.110525] RTW: EEPROM LNAType_5G is 0x0, external_lna_5g = 0
[   79.110557] RTW: EEPROM TypeGPA = 0x0
[   79.110576] RTW: EEPROM TypeAPA = 0x0
[   79.110595] RTW: EEPROM TypeGLNA = 0x0
[   79.110613] RTW: EEPROM TypeALNA = 0x0
[   79.110632] RTW: EEPROM tx_bbswing_24G =0x00
[   79.110650] RTW: EEPROM tx_bbswing_5G =0x00
[   79.110669] RTW: EEPROM USB Switch=0
[   79.110689] RTW: EEPROM VID = 0x0BDA, PID = 0xC820
[   79.124038] RTW: [HALMAC][ALWAYS]shall R reg twice!!
[   79.125487] RTW: SetHwReg: bMacPwrCtrlOn=1
[   79.230933] RTW: _rtw_hal_set_fw_rsvd_page((null)) Get [ NOR ] RsvdPageNUm  ==>
[   79.231000] RTW: LocPsPoll: 4
[   79.231031] RTW: LocNullData: 5
[   79.231098] RTW: LocQosNull: 6
[   79.231123] RTW: LocBTQosNull: 7
[   79.231152] RTW: _rtw_hal_set_fw_rsvd_page((null)) Get [ NOR ] RsvdPageNUm <==
[   79.246539] RTW: WARN [HALMAC][WARN]the H2C ver. does not match halmac
[   79.248029] RTW: rtl8821c_fw_dl Download Firmware from array success
[   79.248077] RTW: NIC FW Version:24 SubVersion:5
[   79.250410] RTW: SetHwReg: bMacPwrCtrlOn=0
[   79.259289] RTW: hal_read_mac_hidden_rpt OK! (1, 13ms), fwdl:1, id:0x19
[   79.259351] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.259657] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.259716] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.260027] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.260082] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.260401] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.260455] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.260776] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.260814] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.261151] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.261206] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.261530] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.261583] RTW: ERROR [HALMAC][ERR]Dump efuse in suspend
[   79.261901] RTW: is_valid_id_status: HALMAC_FEATURE_DUMP_PHYSICAL_EFUSE
[   79.261953] RTW: rtw_hal_read_chip_info in 416 ms
[   79.262079] RTW: init_channel_set((null)) ChannelPlan ID:0x7f, ch num:37
[   79.262170] RTW: [RF_PATH] IC's RF PATH:RF_1T1R, max_tx_cnt:1
[   79.262239] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0
[   79.262282] RTW: [RF_PATH] Registry's RF PATH:UNKNOWN
[   79.262318] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1
[   79.262337] RTW: [RF_PATH] HALDATA's RF PATH:RF_1T1R
[   79.262356] RTW: [RF_PATH] NumTotalRFPath:1
[   79.262382] RTW: rtw_hal_rfpath_init trx_path_bmp:0x11(RF_1T1R), NumTotalRFPath:1, max_tx_cnt:1
[   79.262406] RTW: [TRX_Nss] HALSPEC - tx_nss :1, rx_nss:1
[   79.262441] RTW: [TRX_Nss] Registry - tx_nss :0, rx_nss:0
[   79.262462] RTW: [TRX_Nss] HALDATA - tx_nss :1, rx_nss:1
[   79.262484] RTW: rtw_hal_trxnss_init tx_nss:1, rx_nss:1
[   79.262765] RTW: init_mlme_default_rate_set: support CCK
[   79.262802] RTW: init_mlme_default_rate_set: support OFDM
[   79.263474] RTW: NR_RECVBUFF: 8
[   79.263516] RTW: MAX_RECVBUF_SZ: 32768
[   79.263545] RTW: NR_PREALLOC_RECV_SKB: 8
[   79.263924] RTW: rtw_alloc_macid((null)) if1, mac_addr:ff:ff:ff:ff:ff:ff macid:1
[   79.263976] RTW: rtw_init_pwrctrl_priv: IPS_mode=1, LPS_mode=2, LPS_level=0
[   79.264020] RTW: IQK FW offload:enable
[   79.264053] RTW: init_phydm_cominfo: Fv=1 Cv=4
[   79.264166] RTW: [A] 2G G00 CCK-1T base:45 from IC_DEF
[   79.264207] RTW: [A] 2G G01 CCK-1T base:45 from IC_DEF
[   79.264232] RTW: [A] 2G G02 CCK-1T base:45 from IC_DEF
[   79.264254] RTW: [A] 2G G03 CCK-1T base:45 from IC_DEF
[   79.264277] RTW: [A] 2G G04 CCK-1T base:45 from IC_DEF
[   79.264299] RTW: [A] 2G G05 CCK-1T base:45 from IC_DEF
[   79.264323] RTW: [A] 2G G00 BW40-1S base:45 from IC_DEF
[   79.264358] RTW: [A] 2G G01 BW40-1S base:45 from IC_DEF
[   79.264381] RTW: [A] 2G G02 BW40-1S base:45 from IC_DEF
[   79.264403] RTW: [A] 2G G03 BW40-1S base:45 from IC_DEF
[   79.264426] RTW: [A] 2G G04 BW40-1S base:45 from IC_DEF
[   79.264505] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[   79.264625] RTW: phy_ConfigBBWithPgParaFile(): No File PHY_REG_PG.txt, Load from HWImg Array!
[   79.264690] RTW: default power by rate loaded
[   79.264723] RTW: phy_txpwr_by_rate_chk_for_path_dup duplicate 2.4G [A] to [B]
[   79.264765] RTW: can't get autopm:
[   79.264813] RTW: rtw_macaddr_cfg mac addr:14:f5:f9:d4:e6:74
[   79.264841] RTW: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
[   79.264914] RTW: loadparam, Select P2P interface: iface_id:1
[   79.265259] RTW: init_mlme_default_rate_set: support CCK
[   79.265404] RTW: init_mlme_default_rate_set: support OFDM
[   79.266100] RTW: NR_RECVBUFF: 8
[   79.266145] RTW: MAX_RECVBUF_SZ: 32768
[   79.266176] RTW: NR_PREALLOC_RECV_SKB: 8
[   79.266573] RTW: rtw_alloc_macid((null)) if2, mac_addr:ff:ff:ff:ff:ff:ff macid:1
[   79.266643] RTW: rtw_drv_add_vir_if if2 mac_addr : 16:f5:f9:d4:e6:74
[   79.266734] RTW: rtw_cfg80211_preinit_wiphy iface_id:0- don't set p2p capability
[   79.266784] RTW: rtw_wiphy_alloc(phy0)
[   79.266810] RTW: rtw_wdev_alloc(padapter=ffffff80097a9000)
[   79.266877] RTW: rtw_wiphy_alloc(phy1)
[   79.266901] RTW: rtw_wdev_alloc(padapter=ffffff8009fd2000)
[   79.266928] RTW: rtw_wiphy_register(phy0)
[   79.266952] RTW: Register RTW cfg80211 vendor cmd(0x67) interface
[   79.269623] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE
[   79.271565] RTW: rtw_ndev_init(wlan0) if1 mac_addr=14:f5:f9:d4:e6:74
[   79.272529] RTW: rtw_ndev_notifier_call(wlan0) state:16
[   79.277351] RTW: rtw_ndev_notifier_call(wlan0) state:5
[   79.277516] RTW: rtw_wiphy_register(phy1)
[   79.277545] RTW: Register RTW cfg80211 vendor cmd(0x67) interface
[   79.278307] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE
[   79.279670] RTW: rtw_ndev_init(p2p0) if2 mac_addr=16:f5:f9:d4:e6:74
[   79.280558] RTW: rtw_ndev_notifier_call(p2p0) state:16
[   79.286214] RTW: rtw_ndev_notifier_call(p2p0) state:5
[   79.287311] usbcore: registered new interface driver rtl8821cu
[   79.287353] RTW: module init ret=0
[  123.964271] healthd: battery l=100 v=160 t=18.8 h=2 st=5 c=0 fc=1500000 chg=a
[  183.964244] healthd: battery l=100 v=160 t=18.8 h=2 st=5 c=0 fc=1500000 chg=a

四、上一步wpa_cli -i wlan0 scan会提示Failed to connect to non-global ctrl_ifname: wlan0  error: Connection refused，Android 平台需要先使用 svc wifi enable打开wifi。这样就可以使用 wpa_cli -i wlan0 scan wpa_cli -i wlan0 scan_results扫描到wifi设备。

五、到这里在Android settings里面就会自动的打开WiFi了。

六、使用v5.14.2-32-gbab9939fd.20220913_COEX20210319-5555版本有下面的提示，略微有点不一样，执行svc wifi enable后还是可以工作。

七、参考文章：

PX30 android8.1添加RTL8723DU_config_resume_in_workqueue-CSDN博客

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.hqwc.cn/news/571558.html

如若内容造成侵权/违法违规/事实不符，请联系编程知识网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

面试题 之 webpack

面试题 之 webpack

1.说说你对webpack理解&#xff1f;解决什么问题&#xff1f; Webpack 是实现前端项目的模块化&#xff0c;用于现代 JavaScript 应用程序的静态模块打包工具&#xff0c;被webpack 直接引用的资源打包进 bunde.js的资源&#xff0c;当webpack 处理应用程序时,它会在内部构建一…
阅读更多...
MicroPython字节码文件——mpy文件解析

MicroPython字节码文件——mpy文件解析

参考文档&#xff1a;MicroPython .mpy files 前置注意点 mpy文件的二进制文件是一种嵌套格式。先描述外层模块&#xff0c;然后描述子模块。使用vint&#xff08;变长编码&#xff09;表示整数&#xff0c;当前字节最高位置1表示还有后续字节。不同版本的MicroPython对应的m…
阅读更多...
中霖教育：不是会计专业能参加24年的中级会计师考试吗?

中霖教育：不是会计专业能参加24年的中级会计师考试吗?

经常有很多同学问&#xff1a;我不是会计专业的能报中级会计师考试吗? 先来看报名需要满足的必要条件&#xff1a; 1、大学专科学历&#xff0c;从事会计工作满5年。 2、大学本科学历或学士学位&#xff0c;从事会计工作满4年。 3、第二学士学位或研究生班毕业&#xff0c…
阅读更多...
通过Jmeter准备压测数据-mysql示例

通过Jmeter准备压测数据-mysql示例

1、新建线程组 总共30万条数据 2、创建jdbc链接 创建jdbc连接配置 配置mysql连接 需要在jmeter安装的路径\apache-jmeter-5.6.3\lib\ext 目录下添加mysql 驱动 3、创建jdbc请求 jdbc链接名称需要与上一步中的保持一致&#xff0c;同时添加insert语句 例如 INSERT INTO test…
阅读更多...
电子商务营销中大数据分析的应用|大数据分析在B2C中的应用案例【抖音/京东/淘宝商品数据采集API接口的应用】

电子商务营销中大数据分析的应用|大数据分析在B2C中的应用案例【抖音/京东/淘宝商品数据采集API接口的应用】

文章围绕对大数据分析在电子商务营销中的应用开展&#xff0c;研究了什么是大数据分析和电子商务的营销&#xff0c;以及对于电子商务的营销与大数据分析的结合目前是一个什么样的趋势&#xff0c;分析了大数据分析在电子商务营销中的作用&#xff0c;希望能帮助到大家。抖音/京…
阅读更多...
iOS App 上架指南及关键

iOS App 上架指南及关键

引言 上架App Store是将iOS应用提交申请并上线的过程&#xff0c;旨在让应用在App Store上展示&#xff0c;吸引用户并获取流量。本文将介绍iOS上架的整体流程&#xff0c;并提供一些建议和注意事项。 一、iOS上架的整体流程 1. 申请开发者账号 首先&#xff0c;需要申请苹…
阅读更多...
【免费】面向多微网网络结构设计的大规模二进制矩阵优化算法

【免费】面向多微网网络结构设计的大规模二进制矩阵优化算法

目录 1 主要内容 节点故障网络拓扑变化示意 约束条件 目标函数 2 部分代码 3 结果一览 4 下载链接 1 主要内容 当前电力系统中微电网逐步成为发展的主力军&#xff0c;微网中包括分布式电源和负荷&#xff0c;单一的微电网是和外部电源进行连接&#xff0c;即保证用电的…
阅读更多...
灰豚技术：数字人系统一定要源码部署，原因有三

灰豚技术：数字人系统一定要源码部署，原因有三

数字人源码部署指的是将AI数字人系统源代码进行安装和配置的过程。这通常涉及准备本地服务器或云服务器、准备域名并进行网站备案&#xff0c;然后将源码部署到服务器上。完成部署后&#xff0c;用户就可以开始运营自己的数字人平台&#xff0c;进行数字人的本地化部署&#xf…
阅读更多...
NO11 蓝桥杯单片机之DS18B20数字温度计

NO11 蓝桥杯单片机之DS18B20数字温度计

DS18B20数字温度计这个模块和以往单片机学习的模块可能不同&#xff0c;这里还要知道其头文件&#xff08;.h&#xff09;和.c文件代码的理解。 具体这个温度计是怎么实现检测温度的&#xff0c;呃呃呃呃呃这可能就要去查阅专业资料&#xff0c;涉及的知识体系应该很庞大&…
阅读更多...
LeetCode刷题---查询近30天活跃用户数

LeetCode刷题---查询近30天活跃用户数

1.给出满足的条件&#xff0c;截止至2019-07-27的近30天 activity_date BETWEEN DATE_ADD(2019-07-27,INTERVAL -29 day) and 2019-07-27这里使用了Between and 函数和 Date_add函数 2.按照日期分组&#xff0c;统计活跃用户个数 select activity_date day,count(distinct(us…
阅读更多...
Android Studio 无法下载 gradle-7.3.3-bin.zip

Android Studio 无法下载 gradle-7.3.3-bin.zip

下载新的Android Studio&#xff0c;然后创建新的工程时&#xff0c;出现报错&#xff1a;Could not install Gradle distribution from https://services.gradle.org/distributions/gradle-7.3.3-bin.zip 或者超时&#xff0c;我们可以复制&#xff1a;https://services.grad…
阅读更多...
笔记本作为其他主机显示屏（HDMI采集器）

笔记本作为其他主机显示屏（HDMI采集器）

前言&#xff1a; 我打算打笔记本作为显示屏来用&#xff0c;连上工控机&#xff0c;这不是贼方便吗 操作&#xff1a; 一、必需品 HDMI采集器一个 可以去绿联买一个&#xff0c;便宜的就行&#xff0c;我的大概就长这样 win10下载 PotPlayer 软件 下载链接&#xff1a;h…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023