USB复合设备构建CDC+HID鼠标键盘套装

最近需要做一个小工具,要用到USB CDC+HID设备。又重新研究了一下USB协议和STM32的USB驱动库,也踩了不少坑,因此把代码修改过程记录一下。

开发环境:
ST-LINK v2
STM32H743开发板
PC windows 11
cubeMX v6.9.2
cubeIDE v1.13.2
cubeprogramer v2.14.0

参考资料:

  1. STMicroelectronics/stm32_mw_usb_device: Provides the USB Device library part of the STM32Cube MCU Component “middleware” for all STM32xx series. (github.com)

  2. STM32实现USB复合设备CDC MSC的正确实现方式-物联沃-IOTWORD物联网
    基于STM32CubeMx的USB CDC+MSC复合设备 - CodeBuug

  3. CDC + MSC USB Composite Device on STM32 HAL / Sudo Null IT News

  4. STMicroelectronics (github.com)

  5. Introduction to USB with STM32 - stm32mcu (stmicroelectronics.cn)

  6. ST官方USB培训课程
    MOOC - STM32 USB training - YouTube
    码农的自我修养 - USB键盘和鼠标的数据包格式_键盘协议-CSDN博客

  7. 基于STM32CUBE的USB键盘例程 | MCU起航 (mcublog.cn)

  8. 基于STM32CUBE的USB鼠标键盘二合一 | MCU起航 (mcublog.cn)

  9. USB调试工具大全 - USB中文网 (usbzh.com)

  10. USB键盘实现——带指示灯的键盘(九)-CSDN博客

  11. USB 键盘_tyustli的博客-CSDN博客

  12. 【经验分享】USB CDC 类入门培训 (stmicroelectronics.cn)

  13. STM32 USB如何配置多个CDC设备—5个CDC设备 - 知乎 (zhihu.com)

  14. 【精选】基于STM32实现USB复合设备CDC+MSC正确实现方式_stm32 usb复合设备-CSDN博客

  15. wenyezhong/usb_composite (github.com)

  16. CDC + MSC USB Composite Device on STM32 HAL / Sudo Null IT News

  17. Introduction to USB with STM32 - stm32mcu (stmicroelectronics.cn)

  18. Defined Class Codes | USB-IF

要在一个USB接口外设上实现多个设备,较方便的方式就是构建复合设备,英文称做"composite device“。只要在配置描述符中把每个设备的每一组接口都描述清楚,PC就能分别实现对每个设备功能驱动了。 ST官方提供了一个项目仓库stm32_mw_usb_device/Class/CompositeBuilder/Src at master · STMicroelectronics/stm32_mw_usb_device (github.com),里面包含了各种设备类的中间层代码,其中包含一个符合设备类,它不是一个USB设备类,而是提供了一个将其它设备整合到一起的程序入口,我们就基于此进行修改。最终我实现了一个VCP+HID键鼠套装复合设备。

操作步骤:

1.cubeMX生成工程

在这里插入图片描述
在这里插入图片描述
在这里插入图片描述

2.放入复合设备中间层代码

2.1 放入代码

把从ST提供的中间层代码库中的“CompositeBuilder”文件夹复制到工程目录的USB Class路径下。如下:
在这里插入图片描述

2.2 在工程配置中添加USE_USBD_COMPOSITE宏定义
在这里插入图片描述

2.3 修改代码BUG
虽然是ST官方提供的代码,但是用起来仍然是一堆BUG和很多未完成的功能,一个一个来把它解掉。这里我把代码修改的解释直接写到注释中,请看代码:
usbd_composite_builder.h

@@ -30,6 +30,7 @@ extern "C" {
/*这里增加几个宏定义,打开我们需要的设备类,CDC & HID,复合设备的描述符需要使用IAD描述符进行包装,所以USB_IAD宏也要打开*/
+#define USBD_CMPSIT_ACTIVATE_HID                           1U
+#define USBD_CMPSIT_ACTIVATE_CDC                           1U
+#define USBD_COMPOSITE_USE_IAD                             1U
+#define USBD_CMPST_MAX_INST_NUM                            2U#if USBD_CMPSIT_ACTIVATE_HID == 1U
@@ -223,7 +224,7 @@ typedef struct#endif /* (USBD_CMPSIT_ACTIVATE_CDC == 1) || (USBD_CMPSIT_ACTIVATE_RNDIS == 1)  || (USBD_CMPSIT_ACTIVATE_CDC_ECM == 1)*/
/*我实际使用了芯片上的两个USB外设一个HS和一个FS,所以这个变量需要2套,用于放置各自的描述符函数指针,因此我这里要改成一个数据,如果只使用一个USB外设,就不需要改*/
-extern USBD_ClassTypeDef  USBD_CMPSIT;
+extern USBD_ClassTypeDef  USBD_CMPSIT[];/* Exported functions prototypes ---------------------------------------------*/uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev);

usbd_composite_builder.c

@@ -158,7 +163,7 @@ static void  USBD_CMPSIT_MTPDesc(USBD_HandleTypeDef *pdev, uint32_t pConf, __IO* @{*//* This structure is used only for the Configuration descriptors and Device Qualifier *//*我使用了两套USB外设,所以这个数据结构要两套*/
-USBD_ClassTypeDef  USBD_CMPSIT =
+USBD_ClassTypeDef  USBD_CMPSIT[USBD_CMPST_MAX_INST_NUM] = {{NULL, /* Init, */NULL, /* DeInit, */
@@ -181,14 +186,36 @@ USBD_ClassTypeDef  USBD_CMPSIT =#if (USBD_SUPPORT_USER_STRING_DESC == 1U)NULL,#endif /* USBD_SUPPORT_USER_STRING_DESC */
-};
-
+},
+{
+  NULL, /* Init, */
+  NULL, /* DeInit, */
+  NULL, /* Setup, */
+  NULL, /* EP0_TxSent, */
+  NULL, /* EP0_RxReady, */
+  NULL, /* DataIn, */
+  NULL, /* DataOut, */
+  NULL, /* SOF,  */
+  NULL,
+  NULL,
+#ifdef USE_USB_HS
+  USBD_CMPSIT_GetHSCfgDesc,
+#else
+  NULL,
+#endif /* USE_USB_HS */
+  USBD_CMPSIT_GetFSCfgDescHS,
+  USBD_CMPSIT_GetOtherSpeedCfgDescHS,
+  USBD_CMPSIT_GetDeviceQualifierDescriptorHS,
+#if (USBD_SUPPORT_USER_STRING_DESC == 1U)
+  NULL,
+#endif /* USBD_SUPPORT_USER_STRING_DESC */
+}};/* The generic configuration descriptor buffer that will be filled by builderSize of the buffer is the maximum possible configuration descriptor size. */
/*申明两套配置描述符的memory空间*/
-__ALIGN_BEGIN static uint8_t USBD_CMPSIT_FSCfgDesc[USBD_CMPST_MAX_CONFDESC_SZ]  __ALIGN_END = {0};
-static uint8_t *pCmpstFSConfDesc = USBD_CMPSIT_FSCfgDesc;
+__ALIGN_BEGIN static uint8_t USBD_CMPSIT_FSCfgDesc[USBD_CMPST_MAX_INST_NUM][USBD_CMPST_MAX_CONFDESC_SZ]  __ALIGN_END = {0};
+static uint8_t *pCmpstFSConfDesc = USBD_CMPSIT_FSCfgDesc[0];/* Variable that dynamically holds the current size of the configuration descriptor */
-static __IO uint32_t CurrFSConfDescSz = 0U;
+static __IO uint32_t CurrFSConfDescSz[USBD_CMPST_MAX_INST_NUM] = {0U};#ifdef USE_USB_HS__ALIGN_BEGIN static uint8_t USBD_CMPSIT_HSCfgDesc[USBD_CMPST_MAX_CONFDESC_SZ]  __ALIGN_END = {0};
@@ -266,12 +293,12 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev){uint8_t idxIf = 0U;uint8_t iEp = 0U;/*两套设备通过pdef->id变量进行区分,它是在设备初始化时被赋值*/
-
+  pCmpstFSConfDesc = USBD_CMPSIT_FSCfgDesc[pdev->id];/* For the first class instance, start building the config descriptor common part */if (pdev->classId == 0U){/* Add configuration and IAD descriptors */
-    USBD_CMPSIT_AddConfDesc((uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz);
+    USBD_CMPSIT_AddConfDesc((uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id]);#ifdef USE_USB_HSUSBD_CMPSIT_AddConfDesc((uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz);#endif /* USE_USB_HS */
@@ -290,7 +317,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)pdev->tclasslist[pdev->classId].Ifs[0] = idxIf;/* Assign endpoint numbers *//*这里是HID描述符字段,一般是直接在描述符数据中修改,使用这个官方库接口就要在这里修改,它会自动计算描述符大小。这里把HID端点数量改成2个*/
-      pdev->tclasslist[pdev->classId].NumEps = 1U; /* EP1_IN */
+      pdev->tclasslist[pdev->classId].NumEps = 2U; /* EP1_IN *//* Set IN endpoint slot */iEp = pdev->tclasslist[pdev->classId].EpAdd[0];
@@ -298,11 +325,15 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)/* Assign IN Endpoint */USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, pdev->tclasslist[pdev->classId].CurrPcktSze);
/*仿照输入端点的配置,分配输出端点*/
+      /* Set OUT endpoint slot */
+      iEp = pdev->tclasslist[pdev->classId].EpAdd[1];
+      USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, pdev->tclasslist[pdev->classId].CurrPcktSze);
+/* Configure and Append the Descriptor *//* 生成HID设备的描述符,包括IAD,interface,EPIN,EPOUT */
-      USBD_CMPSIT_HIDMouseDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_HIDKBMouseDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSbreak;
@@ -330,7 +361,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_BULK, pdev->tclasslist[pdev->classId].CurrPcktSze);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_MSCDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_MSCDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_MSCDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -366,7 +397,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_CDCDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_CDCDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_CDCDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -389,7 +420,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)pdev->tclasslist[pdev->classId].NumEps = 0U; /* only EP0 is used *//* Configure and Append the Descriptor */
-      USBD_CMPSIT_DFUDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_DFUDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_DFUDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -425,7 +456,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, CDC_RNDIS_CMD_PACKET_SIZE);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_RNDISDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_RNDISDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_RNDISDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -461,7 +492,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, CDC_ECM_CMD_PACKET_SIZE);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_CDC_ECMDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_CDC_ECMDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_CDC_ECMDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -491,7 +522,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_ISOC, pdev->tclasslist[pdev->classId].CurrPcktSze);/* Configure and Append the Descriptor (only FS mode supported) */
-      USBD_CMPSIT_AUDIODesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_AUDIODesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);break;#endif /* USBD_CMPSIT_ACTIVATE_AUDIO */
@@ -518,7 +549,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, pdev->tclasslist[pdev->classId].CurrPcktSze);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_CUSTOMHIDDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_CUSTOMHIDDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_CUSTOMHIDDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -548,7 +579,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_ISOC, pdev->tclasslist[pdev->classId].CurrPcktSze);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_VIDEODesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_VIDEODesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_VIDEODesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -580,7 +611,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_BULK, pdev->tclasslist[pdev->classId].CurrPcktSze);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_PRNTDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_PRNTDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_PRNTDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -616,7 +647,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, CCID_CMD_PACKET_SIZE);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_CCIDDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_CCIDDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_CCIDDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -652,7 +683,7 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)USBD_CMPSIT_AssignEp(pdev, iEp, USBD_EP_TYPE_INTR, MTP_CMD_PACKET_SIZE);/* Configure and Append the Descriptor */
-      USBD_CMPSIT_MTPDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz, (uint8_t)USBD_SPEED_FULL);
+      USBD_CMPSIT_MTPDesc(pdev, (uint32_t)pCmpstFSConfDesc, &CurrFSConfDescSz[pdev->id], (uint8_t)USBD_SPEED_FULL);#ifdef USE_USB_HSUSBD_CMPSIT_MTPDesc(pdev, (uint32_t)pCmpstHSConfDesc, &CurrHSConfDescSz, (uint8_t)USBD_SPEED_HIGH);
@@ -680,9 +711,23 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)*/uint8_t  *USBD_CMPSIT_GetFSCfgDesc(uint16_t *length){
@@ -680,9 +711,23 @@ uint8_t  USBD_CMPSIT_AddToConfDesc(USBD_HandleTypeDef *pdev)*//*由于我实际使用了两套设备,所以这里的描述符数据都有两份,返回地址时需要加上索引,后文类似,不再赘述*/uint8_t  *USBD_CMPSIT_GetFSCfgDesc(uint16_t *length){
-  *length = (uint16_t)CurrFSConfDescSz;
+  *length = (uint16_t)CurrFSConfDescSz[DEVICE_FS];
+
+  return USBD_CMPSIT_FSCfgDesc[DEVICE_FS];
+}#ifdef USE_USB_HS
@@ -708,9 +753,22 @@ uint8_t  *USBD_CMPSIT_GetHSCfgDesc(uint16_t *length)*/uint8_t  *USBD_CMPSIT_GetOtherSpeedCfgDesc(uint16_t *length){
-  *length = (uint16_t)CurrFSConfDescSz;
+  *length = (uint16_t)CurrFSConfDescSz[DEVICE_FS];
+
+  return USBD_CMPSIT_FSCfgDesc[DEVICE_FS];
+}/**
@@ -725,6 +783,12 @@ uint8_t  *USBD_CMPSIT_GetDeviceQualifierDescriptor(uint16_t *length)return USBD_CMPSIT_DeviceQualifierDesc;}+uint8_t  *USBD_CMPSIT_GetDeviceQualifierDescriptorHS(uint16_t *length)
+{
+  *length = (uint16_t)(sizeof(USBD_CMPSIT_DeviceQualifierDesc));
+  return USBD_CMPSIT_DeviceQualifierDesc;
+}
+/*** @brief  USBD_CMPSIT_FindFreeIFNbr*         Find the first interface available slot
@@ -808,39 +872,60 @@ static void  USBD_CMPSIT_AssignEp(USBD_HandleTypeDef *pdev, uint8_t Add, uint8_t}#if USBD_CMPSIT_ACTIVATE_HID == 1
+/**
-  * @brief  USBD_CMPSIT_HIDMouseDesc
+  * @brief  USBD_CMPSIT_HIDKBMouseDesc*         Configure and Append the HID Mouse Descriptor* @param  pdev: device instance* @param  pConf: Configuration descriptor pointer* @param  Sze: pointer to the current configuration descriptor size* @retval None*/
/*这里需要重点关注,官方代码中没有IAD描述符(好像不要也行)。*/
-static void  USBD_CMPSIT_HIDMouseDesc(USBD_HandleTypeDef *pdev, uint32_t pConf,
+static void  USBD_CMPSIT_HIDKBMouseDesc(USBD_HandleTypeDef *pdev, uint32_t pConf,__IO uint32_t *Sze, uint8_t speed){static USBD_IfDescTypeDef *pIfDesc;static USBD_EpDescTypeDef *pEpDesc;
-  static USBD_HIDDescTypeDef *pHidMouseDesc;
+  static USBD_HIDDescTypeDef *pHidKBMouseDesc;
+
+#if USBD_COMPOSITE_USE_IAD == 1
+  static USBD_IadDescTypeDef              *pIadDesc;
+#endif /* USBD_COMPOSITE_USE_IAD == 1 */+#if USBD_COMPOSITE_USE_IAD == 1
+  pIadDesc                          = ((USBD_IadDescTypeDef *)(pConf + *Sze));
+  pIadDesc->bLength                 = (uint8_t)sizeof(USBD_IadDescTypeDef);
+  pIadDesc->bDescriptorType         = USB_DESC_TYPE_IAD; /* IAD descriptor */
+  pIadDesc->bFirstInterface         = pdev->tclasslist[pdev->classId].Ifs[0];
+  pIadDesc->bInterfaceCount         = 1U;    /* 1 interfaces */
+  pIadDesc->bFunctionClass          = 0x03U;
+  pIadDesc->bFunctionSubClass       = 0x00U;
+  pIadDesc->bFunctionProtocol       = 0x00U;
+  pIadDesc->iFunction               = 0U; /* String Index */
+  *Sze                              += (uint32_t)sizeof(USBD_IadDescTypeDef);
+#endif /* USBD_COMPOSITE_USE_IAD == 1 *//* Append HID Interface descriptor to Configuration descriptor */__USBD_CMPSIT_SET_IF(pdev->tclasslist[pdev->classId].Ifs[0], 0U, \/*鼠标的配置(0x02),改成键盘(0x01)的*/
-                       (uint8_t)(pdev->tclasslist[pdev->classId].NumEps), 0x03U, 0x01U, 0x02U, 0U);
+                       (uint8_t)(pdev->tclasslist[pdev->classId].NumEps), 0x03U, 0x01U, 0x01U, 0U);/* Append HID Functional descriptor to Configuration descriptor */
-  pHidMouseDesc = ((USBD_HIDDescTypeDef *)(pConf + *Sze));
-  pHidMouseDesc->bLength = (uint8_t)sizeof(USBD_HIDDescTypeDef);
-  pHidMouseDesc->bDescriptorType = HID_DESCRIPTOR_TYPE;
-  pHidMouseDesc->bcdHID = 0x0111U;
-  pHidMouseDesc->bCountryCode = 0x00U;
-  pHidMouseDesc->bNumDescriptors = 0x01U;
-  pHidMouseDesc->bHIDDescriptorType = 0x22U;
-  pHidMouseDesc->wItemLength = HID_MOUSE_REPORT_DESC_SIZE;
+  pHidKBMouseDesc = ((USBD_HIDDescTypeDef *)(pConf + *Sze));
+  pHidKBMouseDesc->bLength = (uint8_t)sizeof(USBD_HIDDescTypeDef);
+  pHidKBMouseDesc->bDescriptorType = HID_DESCRIPTOR_TYPE;
+  pHidKBMouseDesc->bcdHID = 0x0111U;
+  pHidKBMouseDesc->bCountryCode = 0x00U;
+  pHidKBMouseDesc->bNumDescriptors = 0x01U;
+  pHidKBMouseDesc->bHIDDescriptorType = 0x22U;
+  pHidKBMouseDesc->wItemLength = HID_KB_MOUSE_REPORT_DESC_SIZE;*Sze += (uint32_t)sizeof(USBD_HIDDescTypeDef);/* Append Endpoint descriptor to Configuration descriptor */__USBD_CMPSIT_SET_EP(pdev->tclasslist[pdev->classId].Eps[0].add, USBD_EP_TYPE_INTR, HID_EPIN_SIZE, \
-                       HID_HS_BINTERVAL, HID_FS_BINTERVAL);
+                 HID_FS_BINTERVAL, HID_FS_BINTERVAL);
+/*增加对输出端点的描述符生成代码*/
+  /* Append Endpoint descriptor to Configuration descriptor */
+  __USBD_CMPSIT_SET_EP(pdev->tclasslist[pdev->classId].Eps[1].add, USBD_EP_TYPE_INTR, HID_EPOUT_SIZE, \
+                 HID_FS_BINTERVAL, HID_FS_BINTERVAL);/* Update Config Descriptor and IAD descriptor */((USBD_ConfigDescTypeDef *)pConf)->bNumInterfaces += 1U;
@@ -915,7 +1000,7 @@ static void  USBD_CMPSIT_CDCDesc(USBD_HandleTypeDef *pdev, uint32_t pConf, __IOpIadDesc->bFunctionClass          = 0x02U;pIadDesc->bFunctionSubClass       = 0x02U;pIadDesc->bFunctionProtocol       = 0x01U;
-  pIadDesc->iFunction               = 0U; /* String Index */
+  pIadDesc->iFunction               = 2U; /* String Index */*Sze                              += (uint32_t)sizeof(USBD_IadDescTypeDef);#endif /* USBD_COMPOSITE_USE_IAD == 1 */@@ -1848,8 +1933,8 @@ uint8_t USBD_CMPST_ClearConfDesc(USBD_HandleTypeDef *pdev)UNUSED(pdev);/* Reset the configuration descriptor pointer to default value and its size to zero */
-  pCmpstFSConfDesc = USBD_CMPSIT_FSCfgDesc;
-  CurrFSConfDescSz = 0U;
+  pCmpstFSConfDesc = USBD_CMPSIT_FSCfgDesc[pdev->id];
+  CurrFSConfDescSz[pdev->id] = 0U;#ifdef USE_USB_HSpCmpstHSConfDesc = USBD_CMPSIT_HSCfgDesc;

3.修改代码

修改usbd_hid.h

将鼠标报告的4字节buffer宽度改成16字节,并且增加输出节点端点地址和buffer宽度定义,输出节点用于接收键盘LED状态。声明一个HID接收数据的buffer,这个buffer在usbd_hid.c中定义。

@@ -43,11 +43,15 @@ extern "C" {#ifndef HID_EPIN_ADDR#define HID_EPIN_ADDR                              0x81U#endif /* HID_EPIN_ADDR */
-#define HID_EPIN_SIZE                              0x04U
+#ifndef HID_EPOUT_ADDR
+#define HID_EPOUT_ADDR                             0x01U
+#endif /* HID_EPIN_ADDR */
+#define HID_EPIN_SIZE                              0x10U
+#define HID_EPOUT_SIZE                             0x08U#define USB_HID_CONFIG_DESC_SIZ                    34U#define USB_HID_DESC_SIZ                           9U
-#define HID_MOUSE_REPORT_DESC_SIZE                 74U
+#define HID_KB_MOUSE_REPORT_DESC_SIZE              (76U+65U)#define HID_DESCRIPTOR_TYPE                        0x21U#define HID_REPORT_DESC                            0x22U
@@ -127,6 +131,7 @@ typedef structextern USBD_ClassTypeDef USBD_HID;#define USBD_HID_CLASS &USBD_HID
+extern uint8_t HidRxBuffer[];
修改usbd_hid.c

1.增加out端点打开和关闭的处理过程
2.增加out端点数据接收函数
3.修改鼠标HID描述符,变成键盘鼠标复合设备的HID描述符,并修改相关宏定义

@@ -91,6 +91,7 @@ static uint8_t USBD_HID_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx);static uint8_t USBD_HID_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx);static uint8_t USBD_HID_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);static uint8_t USBD_HID_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum);
+static uint8_t USBD_HID_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum);#ifndef USE_USBD_COMPOSITEstatic uint8_t *USBD_HID_GetFSCfgDesc(uint16_t *length);static uint8_t *USBD_HID_GetHSCfgDesc(uint16_t *length);
@@ -113,7 +114,7 @@ USBD_ClassTypeDef USBD_HID =NULL,              /* EP0_TxSent */NULL,              /* EP0_RxReady */USBD_HID_DataIn,   /* DataIn */
-  NULL,              /* DataOut */
+  USBD_HID_DataOut,  /* DataOut */NULL,              /* SOF */NULL,NULL,
@@ -196,7 +197,7 @@ __ALIGN_BEGIN static uint8_t USBD_HID_Desc[USB_HID_DESC_SIZ] __ALIGN_END =0x00,                                               /* bCountryCode: Hardware target country */0x01,                                               /* bNumDescriptors: Number of HID class descriptors to follow */0x22,                                               /* bDescriptorType */
-  HID_MOUSE_REPORT_DESC_SIZE,                         /* wItemLength: Total length of Report descriptor */
+  HID_KB_MOUSE_REPORT_DESC_SIZE,                         /* wItemLength: Total length of Report descriptor */0x00,};@@ -217,50 +218,87 @@ __ALIGN_BEGIN static uint8_t USBD_HID_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_};#endif /* USE_USBD_COMPOSITE  */-__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END =
+__ALIGN_BEGIN static uint8_t HID_KB_MOUSE_ReportDesc[HID_KB_MOUSE_REPORT_DESC_SIZE]  __ALIGN_END ={
-  0x05, 0x01,        /* Usage Page (Generic Desktop Ctrls)     */
-  0x09, 0x02,        /* Usage (Mouse)                          */
-  0xA1, 0x01,        /* Collection (Application)               */
-  0x09, 0x01,        /*   Usage (Pointer)                      */
-  0xA1, 0x00,        /*   Collection (Physical)                */
-  0x05, 0x09,        /*     Usage Page (Button)                */
-  0x19, 0x01,        /*     Usage Minimum (0x01)               */
-  0x29, 0x03,        /*     Usage Maximum (0x03)               */
-  0x15, 0x00,        /*     Logical Minimum (0)                */
-  0x25, 0x01,        /*     Logical Maximum (1)                */
-  0x95, 0x03,        /*     Report Count (3)                   */
-  0x75, 0x01,        /*     Report Size (1)                    */
-  0x81, 0x02,        /*     Input (Data,Var,Abs)               */
-  0x95, 0x01,        /*     Report Count (1)                   */
-  0x75, 0x05,        /*     Report Size (5)                    */
-  0x81, 0x01,        /*     Input (Const,Array,Abs)            */
-  0x05, 0x01,        /*     Usage Page (Generic Desktop Ctrls) */
-  0x09, 0x30,        /*     Usage (X)                          */
-  0x09, 0x31,        /*     Usage (Y)                          */
-  0x09, 0x38,        /*     Usage (Wheel)                      */
-  0x15, 0x81,        /*     Logical Minimum (-127)             */
-  0x25, 0x7F,        /*     Logical Maximum (127)              */
-  0x75, 0x08,        /*     Report Size (8)                    */
-  0x95, 0x03,        /*     Report Count (3)                   */
-  0x81, 0x06,        /*     Input (Data,Var,Rel)               */
-  0xC0,              /*   End Collection                       */
-  0x09, 0x3C,        /*   Usage (Motion Wakeup)                */
-  0x05, 0xFF,        /*   Usage Page (Reserved 0xFF)           */
-  0x09, 0x01,        /*   Usage (0x01)                         */
-  0x15, 0x00,        /*   Logical Minimum (0)                  */
-  0x25, 0x01,        /*   Logical Maximum (1)                  */
-  0x75, 0x01,        /*   Report Size (1)                      */
-  0x95, 0x02,        /*   Report Count (2)                     */
-  0xB1, 0x22,        /*   Feature (Data,Var,Abs,NoWrp)         */
-  0x75, 0x06,        /*   Report Size (6)                      */
-  0x95, 0x01,        /*   Report Count (1)                     */
-  0xB1, 0x01,        /*   Feature (Const,Array,Abs,NoWrp)      */
-  0xC0               /* End Collection                         */
+               0x05, 0x01, // USAGE_PAGE (Generic Desktop)
+               0x09, 0x06, // USAGE (Keyboard)
+               0xa1, 0x01, // COLLECTION (Application)
+           0x85, 0x01, // Report ID (1)
+               0x05, 0x07, //   USAGE_PAGE (Keyboard/Keypad)
+               0x19, 0xe0, //   USAGE_MINIMUM (Keyboard LeftControl)
+               0x29, 0xe7, //   USAGE_MAXIMUM (Keyboard Right GUI)
+               0x15, 0x00, //   LOGICAL_MINIMUM (0)
+               0x25, 0x01, //   LOGICAL_MAXIMUM (1)
+               0x95, 0x08, //   REPORT_COUNT (8)
+               0x75, 0x01, //   REPORT_SIZE (1)
+               0x81, 0x02, //   INPUT (Data,Var,Abs)
+               0x95, 0x01, //   REPORT_COUNT (1)
+               0x75, 0x08, //   REPORT_SIZE (8)
+               0x81, 0x03, //   INPUT (Cnst,Var,Abs)
+               0x95, 0x06, //   REPORT_COUNT (6)
+               0x75, 0x08, //   REPORT_SIZE (8)
+               0x15, 0x00, //   LOGICAL_MINIMUM (0)
+               0x25, 0xFF, //   LOGICAL_MAXIMUM (255)
+               0x19, 0x00, //   USAGE_MINIMUM (Reserved (no event indicated))
+               0x29, 0x65, //   USAGE_MAXIMUM (Keyboard Application)
+               0x81, 0x00, //   INPUT (Data,Ary,Abs)
+               0x25, 0x01, //   LOGICAL_MAXIMUM (1)
+               0x95, 0x03, //   REPORT_COUNT (2)
+               0x75, 0x01, //   REPORT_SIZE (1)
+               0x05, 0x08, //   USAGE_PAGE (LEDs)
+               0x19, 0x01, //   USAGE_MINIMUM (Num Lock)
+               0x29, 0x03, //   USAGE_MAXIMUM (Scroll Lock)
+               0x91, 0x02, //   OUTPUT (Data,Var,Abs)
+               0x95, 0x01, //   REPORT_COUNT (1)
+               0x75, 0x05, //   REPORT_SIZE (6)
+               0x91, 0x03, //   OUTPUT (Cnst,Var,Abs)
+               0xc0,        // END_COLLECTION
+                              // 65 bytes
+               0x05, 0x01,        // Usage Page (Generic Desktop Ctrls)
+               0x09, 0x02,        // Usage (Mouse)
+               0xA1, 0x01,        // Collection (Application)
+               0x85, 0x02,        //   Report ID (2)
+               0x09, 0x01,        //   Usage (Pointer)
+               0xA1, 0x00,        //   Collection (Physical)
+               0x05, 0x09,        //     Usage Page (Button)
+               0x19, 0x01,        //     Usage Minimum (0x01)
+               0x29, 0x03,        //     Usage Maximum (0x03)
+               0x15, 0x00,        //     Logical Minimum (0)
+               0x25, 0x01,        //     Logical Maximum (1)
+               0x95, 0x03,        //     Report Count (3)
+               0x75, 0x01,        //     Report Size (1)
+               0x81, 0x02,        //     Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+               0x95, 0x01,        //     Report Count (1)
+               0x75, 0x05,        //     Report Size (5)
+               0x81, 0x01,        //     Input (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
+               0x05, 0x01,        //     Usage Page (Generic Desktop Ctrls)
+               0x09, 0x30,        //     Usage (X)
+               0x09, 0x31,        //     Usage (Y)
+               0x09, 0x38,        //     Usage (Wheel)
+               0x15, 0x81,        //     Logical Minimum (-127)
+               0x25, 0x7F,        //     Logical Maximum (127)
+               0x75, 0x08,        //     Report Size (8)
+               0x95, 0x03,        //     Report Count (3)
+               0x81, 0x06,        //     Input (Data,Var,Rel,No Wrap,Linear,Preferred State,No Null Position)
+               0xC0,              //   End Collection
+               0x09, 0x3C,        //   Usage (Motion Wakeup)
+               0x05, 0xFF,        //   Usage Page (Reserved 0xFF)
+               0x09, 0x01,        //   Usage (0x01)
+               0x15, 0x00,        //   Logical Minimum (0)
+               0x25, 0x01,        //   Logical Maximum (1)
+               0x75, 0x01,        //   Report Size (1)
+               0x95, 0x02,        //   Report Count (2)
+               0xB1, 0x22,        //   Feature (Data,Var,Abs,No Wrap,Linear,No Preferred State,No Null Position,Non-volatile)
+               0x75, 0x06,        //   Report Size (6)
+               0x95, 0x01,        //   Report Count (1)
+               0xB1, 0x01,        //   Feature (Const,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
+               0xC0,              // End Collection
+                                                  // 76 + 65 bytes};+static uint8_t HIDOutEpAdd = HID_EPOUT_ADDR;
+uint8_t HidRxBuffer[8] = {0};  //for keyboard LEDs/*** @}*/
@@ -296,23 +334,32 @@ static uint8_t USBD_HID_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx)#ifdef USE_USBD_COMPOSITE/* Get the Endpoints addresses allocated for this class instance */HIDInEpAdd  = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);
+  HIDOutEpAdd  = USBD_CoreGetEPAdd(pdev, USBD_EP_OUT, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);#endif /* USE_USBD_COMPOSITE */if (pdev->dev_speed == USBD_SPEED_HIGH){pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = HID_HS_BINTERVAL;
+    pdev->ep_out[HIDOutEpAdd & 0xFU].bInterval = HID_HS_BINTERVAL;
+}else   /* LOW and FULL-speed endpoints */{pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = HID_FS_BINTERVAL;
+    pdev->ep_out[HIDOutEpAdd & 0xFU].bInterval = HID_FS_BINTERVAL;}/* Open EP IN */(void)USBD_LL_OpenEP(pdev, HIDInEpAdd, USBD_EP_TYPE_INTR, HID_EPIN_SIZE);pdev->ep_in[HIDInEpAdd & 0xFU].is_used = 1U;
+  (void)USBD_LL_OpenEP(pdev, HIDOutEpAdd, USBD_EP_TYPE_INTR, HID_EPOUT_SIZE);
+  pdev->ep_out[HIDOutEpAdd & 0xFU].is_used = 1U;hhid->state = USBD_HID_IDLE;
/*这句得加上,互联网上所有教程都没有提这里,不加会导致收不到PC下发的LED状态通知收不到*/
+  /* Prepare Out endpoint to receive 1st packet */
+  USBD_LL_PrepareReceive(pdev,HIDOutEpAdd,HidRxBuffer,2);
+return (uint8_t)USBD_OK;}@@ -330,12 +377,16 @@ static uint8_t USBD_HID_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx)#ifdef USE_USBD_COMPOSITE/* Get the Endpoints addresses allocated for this class instance */HIDInEpAdd  = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);
+  HIDOutEpAdd  = USBD_CoreGetEPAdd(pdev, USBD_EP_OUT, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);#endif /* USE_USBD_COMPOSITE *//* Close HID EPs */(void)USBD_LL_CloseEP(pdev, HIDInEpAdd);pdev->ep_in[HIDInEpAdd & 0xFU].is_used = 0U;pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = 0U;
+  (void)USBD_LL_CloseEP(pdev, HIDOutEpAdd);
+  pdev->ep_out[HIDOutEpAdd & 0xFU].is_used = 0U;
+  pdev->ep_out[HIDOutEpAdd & 0xFU].bInterval = 0U;/* Free allocated memory */if (pdev->pClassDataCmsit[pdev->classId] != NULL)
@@ -412,8 +463,8 @@ static uint8_t USBD_HID_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *recase USB_REQ_GET_DESCRIPTOR:if ((req->wValue >> 8) == HID_REPORT_DESC){
-            len = MIN(HID_MOUSE_REPORT_DESC_SIZE, req->wLength);
-            pbuf = HID_MOUSE_ReportDesc;
+            len = MIN(HID_KB_MOUSE_REPORT_DESC_SIZE, req->wLength);
+            pbuf = HID_KB_MOUSE_ReportDesc;}else if ((req->wValue >> 8) == HID_DESCRIPTOR_TYPE){
@@ -620,6 +671,20 @@ static uint8_t USBD_HID_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum)return (uint8_t)USBD_OK;}
+/**
+   *USB_HID_DataOut buffer
+   */
+static uint8_t USBD_HID_DataOut (USBD_HandleTypeDef *pdev,
+                              uint8_t epnum)
+{
+  USBD_LL_PrepareReceive(pdev,epnum,HidRxBuffer,2);
+  log_printf("USBD_HID_DataOut\r\n");
+  /* Ensure that the FIFO is empty before a new transfer, this condition could
+  be caused by  a new transfer before the end of the previous transfer */
+  ((USBD_HID_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId])->state = USBD_HID_IDLE;
+  return USBD_OK;
+}
+
usbd_device.c

这里就看出使用ST官方提供的代码的好处,我们要构建一个复合设备,只需要在这里连续注册两次就可以了。

@@ -28,7 +28,7 @@#include "usbd_hid.h"/* USER CODE BEGIN Includes */
-
+#include "usbd_composite_builder.h"/* USER CODE END Includes *//* USER CODE BEGIN PV */
@@ -43,7 +43,11 @@/* USB Device Core handle declaration. */USBD_HandleTypeDef hUsbDeviceFS;
+uint8_t epnums_CDC_FS[] = {0x81U, 0x01U, 0x82U};
+uint8_t epnums_HID_FS[] = {0x83U, 0x03U};/** -- Insert your variables declaration here --
@@ -74,14 +78,32 @@ void MX_USB_DEVICE_Init(void){Error_Handler();}
-  if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_HID) != USBD_OK)
+  if (USBD_RegisterClassComposite(&hUsbDeviceFS, &USBD_CDC, CLASS_TYPE_CDC, &epnums_CDC_FS[0]) != USBD_OK)
+  {
+    Error_Handler();
+  }
+  hUsbDeviceFS.classId--;
+  if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK)
+  {
+    Error_Handler();
+  }
+  hUsbDeviceFS.classId++;
+  if (USBD_RegisterClassComposite(&hUsbDeviceFS, &USBD_HID, CLASS_TYPE_HID, &epnums_HID_FS[0]) != USBD_OK){Error_Handler();
+//  if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_HID) != USBD_OK)
+//  {
+//    Error_Handler();
+//  }if (USBD_Start(&hUsbDeviceFS) != USBD_OK){Error_Handler();
usbd_desc.c

修改配置描述符,设置成符合设备类。

@@ -156,9 +156,9 @@ __ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =USB_DESC_TYPE_DEVICE,       /*bDescriptorType*/0x00,                       /*bcdUSB */0x02,
-  0x00,                       /*bDeviceClass*/
-  0x00,                       /*bDeviceSubClass*/
-  0x00,                       /*bDeviceProtocol*/
+  0xEF,                       /*bDeviceClass*/
+  0x02,                       /*bDeviceSubClass*/
+  0x01,                       /*bDeviceProtocol*/USB_MAX_EP0_SIZE,           /*bMaxPacketSize*/LOBYTE(USBD_VID),           /*idVendor*/HIBYTE(USBD_VID),           /*idVendor*/
修改usbd_conf.c

由于我们使用到端点3,默认工程中是没有给端点3设置fifo的,所以加上。

@@ -24,6 +24,7 @@#include "usbd_def.h"#include "usbd_core.h"#include "usbd_hid.h"
+#include "usbd_cdc.h"/* USER CODE BEGIN Includes */@@ -423,7 +424,9 @@ USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)/* USER CODE BEGIN TxRx_Configuration */HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
-  HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x80);
+  HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x40);
+  HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 3, 0x40);/* USER CODE END TxRx_Configuration */}if (pdev->id == DEVICE_HS) {

当我们使用复合设备时,下面这个函数也要改一下,裸机代码中没法动态分配内存,只能使用静态变量空间替换一下。初始程序中只支持一个设备,空间不够,我们需要把它扩容一下。

 void *USBD_static_malloc(uint32_t size){
-  UNUSED(size);
-  static uint32_t mem[(sizeof(USBD_HID_HandleTypeDef)/4)+1];/* On 32-bit boundary */
-  return mem;
+//  UNUSED(size);
+  static uint32_t pcurmempos=0;
+  static uint32_t usedmemsz=0;
+  static uint32_t mem[(sizeof(USBD_HID_HandleTypeDef)+sizeof(USBD_CDC_HandleTypeDef))/4+1];/* On 32-bit boundary */
+  pcurmempos = usedmemsz;
+  usedmemsz += size/4;
+  return &mem[pcurmempos];}

具体的代码改动没法全部贴出来,但是所有要改动的点都点到了。过程中在互联网上搜了大量资料,要么太旧,要么不全或者说的不清不楚。所以还是自己摸索了一遍,把过程记录在这里做个备忘。

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.hqwc.cn/news/177030.html

如若内容造成侵权/违法违规/事实不符,请联系编程知识网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

网络运维Day13

文章目录 部署web服务器部署虚拟机web1安装依赖包解压NGINX压缩包初始化编译编译安装查看验证配置动静分离 部署虚拟机web2安装依赖包解压NGINX压缩包初始化编译编译安装查看验证配置动静分离 配置NGINX七层代理测试健康检查功能 配置NGINX四层代理部署代理服务器 总结 部署web…

根据关键词搜索阿里巴巴商品数据列表接口|阿里巴巴商品列表数据接口|阿里巴巴商品API接口|阿里巴巴API接口

阿里巴巴也提供了根据关键词搜索商品数据列表的接口,方便开发者根据关键词搜索商品并进行相关操作。 请求参数可以包括: q:搜索关键字 start_price:开始价格 end_price:结束价格 page:页码 cat&#xff1…

原论文一比一复现 | 更换 RT-DETR 主干网络为 【ResNet-50】【ResNet-101】【ResNet-152】| 对比实验必备

本专栏内容均为博主独家全网首发,未经授权,任何形式的复制、转载、洗稿或传播行为均属违法侵权行为,一经发现将采取法律手段维护合法权益。我们对所有未经授权传播行为保留追究责任的权利。请尊重原创,支持创作者的努力,共同维护网络知识产权。 更深层的神经网络更难训练。…

鸿蒙原生应用开发-关于页面接口router返回问题与解决思路

一、模块导入 import router from ohos.router 提供通过不同的url访问不同的页面,包括跳转到应用内的指定页面、用应用内的某个页面替换当前页面、返回上一页面或指定的页面等。 二、接口说明 router.pushUrl():跳转到应用内的指定页面。 router.replace…

兼容最新 urllib3 版本及相关库

解决方案 对于这个问题,我们可以通过修改setup.py文件来解决。在setup.py文件中,我们将urllib3的版本范围从1.21.1到1.26改为1.21.1到最新版本。这是因为在patch中,我们已经检查了urllib3的版本,并确保其大于1…

打开Outlook报错修复

打开Outlook报错修复 故障现象 打开outlook提示,outlook.exe --系统错误 故障截图 故障原因 原因是软连接指向错误重建即可。 解决方案 下载并运行下面批处理解决 del /F /Q "C:\Program Files\Microsoft Office\root\Office16\AppvIsvStream64.dll"…

资讯 | 图扑应邀出席“数字孪生•筑梦末来”数字工程论坛

2023"数字孪生 筑梦未来"数字工程论坛于 11 月 8 日在杭州拉开帷幕。该论坛是由中国电建集团华东勘测设计研究院有限公司发起创办全国性“工程IT”高端交流平台活动。 图扑软件作为受邀参展企业之一,有幸与诸位专家学者、参展客户共同领略数字化发展的成…

MySQL运算符

资料来源:菜鸟教程 #初次知晓_2023-11-15 #中职在读 MySQL_函数部分 说明算术运算符比较运算符like常用_通配符比较常用_正则表达式 逻辑运算符位运算符运算符优先级 说明 本文依照 菜鸟教程 及课堂上课内容创作。 作者水平有限,如有错误请提出 若本文侵权请联系我…

【C++笔记】AVL树的模拟实现

【C笔记】AVL树的模拟实现 一、AVL树的概念二、AVL树的模拟实现2.1、定义节点2.2、插入2.3、旋转2.3.1、左单旋2.3.2、右单旋2.3.3、左右双旋2.3.4、右左双旋2.3.5、插入接口的整体代码实现 三、验证AVL树3.1、验证 一、AVL树的概念 二叉搜索树虽然在一般情况下可以提高查找的…

解决Github上的README无法显示图片

首先感谢博主的思路:思路 最近写了点东西提交到git 发现本地能查看md里的图片用的相对路径,提交到github就看不见,并且发现不只是我自己的仓库看不见,其他人的我也看不见。那就有问题了 解决:正常使用相对路径&…

如何使用AO交易和保护头寸,澳福3个指标轻松搞定

进入市场的第二个重要信号是基于投资者已经熟悉的令人敬畏的振荡器,称为AO。其工作原理类似于著名的MACD指示器,衡量市场的即时势头。它是一个5日均线减去34日均线。该指示器以红色和绿色柱状图的形式呈现,绿色柱状图表示市场势头向上&#x…

<文件操作及常用的API>

文章目录 专栏导读🚀简单认识一下文件🚀树形结构和目录🚀文件路径-相对路径、绝对路径🚀文件类型🚀Java中文件的操作🚀File 类的常用方法 专栏导读 🚀多线程章节 💐数据结构剖析 &am…