k8s集群加入一个master2--kubeadm方式-编程知识

已经有一个集群：

192.168.206.138 master
192.168.206.136 k8s-node1
192.168.206.137 k8s-node2

kubectl get nodes -o wide

新加入一个master2节点
192.168.206.139 master2

一、初始化系统参数 139 master2 上

#在136、137、138上添加hosts“”
echo "192.168.206.139 master2" >>/etc/hosts

#在139上执行：
echo "192.168.206.138 master" >>/etc/hosts
echo "192.168.206.136 k8s-node1" >>/etc/hosts
echo "192.168.206.137 k8s-node2" >>/etc/hosts
echo "192.168.206.139 master2" >>/etc/hosts
hostname master2
echo master2 > /etc/hostname
cd /etc/yum.repos.d
wget http://mirrors.aliyun.com/repo/Centos-7.repo cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOFyum clean all
yum repolist#安装containerd
# 1.安装源和依赖软件包(与docker没区别)
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
sed -i 's+download.docker.com+mirrors.aliyun.com/docker-ce+' /etc/yum.repos.d/docker-ce.repo
yum makecache fast# 2.安装containerd
yum install containerd -y
containerd --version # 查看containerd版本# 3.启动containerd
systemctl start containerd && systemctl enable containerd && systemctl status containerdsystemctl stop firewalld && systemctl disable firewalld
sed -i 's/^SELINUX=enforcing$/SELINUX=disabled/' /etc/selinux/config
setenforce 0yes | cp /etc/fstab /etc/fstab_bak 
cat /etc/fstab_bak |grep -v swap > /etc/fstabcat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOFcat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOFcat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOFcat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOFecho 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
echo 1 > /proc/sys/net/ipv4/ip_forward
swapoff -acat > /etc/sysconfig/modules/ipvs.modules <<EOF#!/bin/bash modprobe -- ip_vs modprobe -- ip_vs_rr modprobe -- ip_vs_wrr modprobe -- ip_vs_sh modprobe -- nf_conntrack_ipv4 
EOFchmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4yum -y install docker
#然后修改daemon.json，添加：cat  << EOF  > /etc/docker/daemon.json 
{"registry-mirrors": ["https://wyrsf017.mirror.aliyuncs.com"]
}
EOFsystemctl start docker
systemctl enable docker
systemctl status docker
docker versionyum -y install kubelet-1.19.0 kubeadm-1.19.0 kubectl-1.19.0 --disableexcludes=kubernetes
echo 'KUBELET_EXTRA_ARGS="--feature-gates SupportPodPidsLimit=false --feature-gates SupportNodePidsLimit=false"' > /etc/sysconfig/kubelet
systemctl start kubelet
systemctl enable kubelet
systemctl status kubelet#下载镜像
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.19.16
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.19.16
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.19.16
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.19.16
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.4.9-1
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.7.0docker imagesdocker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.19.16 registry.k8s.io/kube-apiserver:v1.19.16
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.19.16 registry.k8s.io/kube-controller-manager:v1.19.16
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.19.16 registry.k8s.io/kube-scheduler:v1.19.16
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.19.16 registry.k8s.io/kube-proxy:v1.19.16
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2 registry.k8s.io/pause:3.2
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.4.9-1 registry.k8s.io/etcd:3.4.9-1
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.7.0 registry.k8s.io/coredns/coredns:v1.7.0mkdir -p /etc/kubernetes/
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> /etc/profile
source /etc/profile

#修改master2的kubeadm-config，加入controlPlaneEndpoint: 192.168.206.138:6443kubectl -n kube-system edit cm kubeadm-config#找到kind: ClusterConfigurationkubernetesVersion: v1.19.0
#在下面加入：controlPlaneEndpoint: 192.168.206.138:6443

如果不加这句，加入集群时一定会报错：

[preflight] Running pre-flight checks
[WARNING SystemVerification]: missing optional cgroups: pids
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
error execution phase preflight:
One or more conditions for hosting a new control plane instance is not satisfied.

unable to add a new control plane instance a cluster that doesn't have a stable controlPlaneEndpoint address

Please ensure that:
* The cluster has a stable controlPlaneEndpoint address.
* The certificates that must be shared among control plane instances are provided.

To see the stack trace of this error execute with --v=5 or higher

二、在master 138上找到加入集群的命令，并将 master 138上的证书copy到139上：

master 138上执行：

cd /etc/kubernetes/
scp -rp pki 192.168.206.139:/etc/kubernetes/
scp /etc/kubernetes/admin.conf 192.168.206.139:/etc/kubernetes/
kubeadm init phase upload-certs --upload-certs
kubeadm token create --print-join-command

三、master2 使用 kubeadm 命令加入集群

此处是将以上两个参数拼接起来的，特别是key，会一直变，如果耽误时间过长，这里就会报错：

kubeadm join 192.168.206.138:6443 --token iw6jit.m5fp5ftpmzd5qw14     --discovery-token-ca-cert-hash sha256:af0bd61b3323d6ccf692706f9be2b0d89eb7f0c4ed79ae3ef874b4b1690b1c85 --control-plane --certificate-key 272fb136b903ee039690d2cc8fef37b60da6506f59377560d04ffc7cbc722bff

见下图信息为加入成功：

[root@master kubernetes]# kubectl get nodes -o wide

[root@master2 ~]# kubectl get pods -o wide

master2后续步骤：

rm -rf /root/.kube/
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> /etc/profile
export KUBECONFIG=/etc/kubernetes/admin.conf
echo 'source <(kubectl completion bash)' >> /etc/bashrc
source <(kubectl completion bash)
source /etc/profile
kubectl get svc

此时，使用192.168.206.139:30088 即可访问tomcatservice1 下的tomcat网页

四：记录一个错误：

[root@master2 ~]# kubeadm join 192.168.206.138:6443 --token iw6jit.m5fp5ftpmzd5qw14 --discovery-token-ca-cert-hash sha256:af0bd61b3323d6ccf692706f9be2b0d89eb7f0c4ed79ae3ef874b4b1690b1c85 --control-plane --certificate-key b01d7a5a14a2365fc58f08162682eb4078186bd8cc9b54af3af9cf8eca4b3226
[preflight] Running pre-flight checks
[WARNING SystemVerification]: missing optional cgroups: pids
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[preflight] Running pre-flight checks before initializing the new control plane instance
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[download-certs] Downloading the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
error execution phase control-plane-prepare/download-certs: error downloading certs: error downloading the secret: Secret "kubeadm-certs" was not found in the "kube-system" Namespace. This Secret might have expired. Please, run `kubeadm init phase upload-certs --upload-certs` on a control plane to generate a new one
To see the stack trace of this error execute with --v=5 or higher
关键字：error execution phase control-plane-prepare/download-certs: error downloading certs:

解决方案：在master上使用以下命令生成新的key，重新拼接命令

[root@master kubernetes]# kubeadm init phase upload-certs --upload-certs