[Kubernetes] 安装KubeSphere

  1. 选择4核8G（master）、8核16G（node1）、8核16G（node2） 三台机器，按量付费进行实验，CentOS7.9
  2. 安装Docker
  3. 安装Kubernetes
  4. 安装KubeSphere前置环境: nfs和监控
  5. 安装KubeSphere

在这里插入图片描述

  • master
  • node1
  • node2

    文章目录

        • 1.安装Docker
        • 2.安装Kubernetes
        • 3.安装kubelet、kubeadm、kubectl
        • 4.master上安装镜像
        • 5.初始化master节点
          • 5.1 记录关键信息
          • 5.2 安装网络插件
        • 6.安装KubeSphere前置环境
          • 6.1 安装nfs文件系统
          • 6.2 配置默认存储
          • 6.3 集群指标监控组件
        • 7.安装KubeSphere
          • 7.1 下载核心配置文件
          • 7.2 执行配置文件
          • 7.3 配置文件
            • 7.3.1 kubesphere-installer.yaml
            • 7.3.2 cluster-configuration.yaml

1.安装Docker

yum remove docker*
yum install -y yum-utils#配置docker的yum地址yum-config-manager \--add-repo \http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo#安装指定版本
yum install -y docker-ce-20.10.7 docker-ce-cli-20.10.7 containerd.io-1.4.6#	启动&开机启动docker
systemctl enable docker --now# docker加速配置
mkdir -p /etc/docker
tee /etc/docker/daemon.json <<-'EOF'
{"registry-mirrors": ["https://82m9ar63.mirror.aliyuncs.com"],"exec-opts": ["native.cgroupdriver=systemd"],"log-driver": "json-file","log-opts": {"max-size": "100m"},"storage-driver": "overlay2"
}
EOF
systemctl daemon-reload
systemctl restart docker

2.安装Kubernetes

#设置每个机器自己的hostname
hostnamectl set-hostname master
hostnamectl set-hostname node1
hostnamectl set-hostname node2# 将 SELinux 设置为 permissive 模式（相当于将其禁用）
sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config#关闭swap
swapoff -a  
sed -ri 's/.*swap.*/#&/' /etc/fstab#允许 iptables 检查桥接流量
cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOFcat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sudo sysctl --system

3.安装kubelet、kubeadm、kubectl

#配置k8s的yum源地址
cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpghttp://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF#安装 kubelet，kubeadm，kubectl
sudo yum install -y kubelet-1.20.9 kubeadm-1.20.9 kubectl-1.20.9#启动kubelet
sudo systemctl enable --now kubelet#所有机器配置master域名
echo "172.31.0.4  k8s-master" >> /etc/hosts

4.master上安装镜像

sudo tee ./images.sh <<-'EOF'
#!/bin/bash
images=(
kube-apiserver:v1.20.9
kube-proxy:v1.20.9
kube-controller-manager:v1.20.9
kube-scheduler:v1.20.9
coredns:1.7.0
etcd:3.4.13-0
pause:3.2
)
for imageName in ${images[@]} ; do
docker pull registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images/$imageName
done
EOFchmod +x ./images.sh && ./images.sh

5.初始化master节点

kubeadm init \
--apiserver-advertise-address=172.31.0.4 \
--control-plane-endpoint=k8s-master \
--image-repository registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images \
--kubernetes-version v1.20.9 \
--service-cidr=10.96.0.0/16 \
--pod-network-cidr=192.168.0.0/16
5.1 记录关键信息
Your Kubernetes control-plane has initialized successfully!To start using your cluster, you need to run the following as a regular user:mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/configAlternatively, if you are the root user, you can run:export KUBECONFIG=/etc/kubernetes/admin.confYou should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:https://kubernetes.io/docs/concepts/cluster-administration/addons/You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:kubeadm join k8s-master:6443 --token 3vckmv.lvrl05xpyftbs177 \--discovery-token-ca-cert-hash sha256:1dc274fed24778f5c284229d9fcba44a5df11efba018f9664cf5e8ff77907240 \--control-plane Then you can join any number of worker nodes by running the following on each as root:kubeadm join k8s-master:6443 --token 3vckmv.lvrl05xpyftbs177 \--discovery-token-ca-cert-hash sha256:1dc274fed24778f5c284229d9fcba44a5df11efba018f9664cf5e8ff77907240
5.2 安装网络插件
curl https://docs.projectcalico.org/v3.20/manifests/calico.yaml -Okubectl apply -f calico.yaml

在这里插入图片描述

6.安装KubeSphere前置环境

6.1 安装nfs文件系统

master:

# 在每个机器。
yum install -y nfs-utils# 在master 执行以下命令 
echo "/nfs/data/ *(insecure,rw,sync,no_root_squash)" > /etc/exports# 执行以下命令，启动 nfs 服务;创建共享目录
mkdir -p /nfs/data# 在master执行
systemctl enable rpcbind
systemctl enable nfs-server
systemctl start rpcbind
systemctl start nfs-server# 使配置生效
exportfs -r#检查配置是否生效
exportfs

node:

yum install -y nfs-utilsshowmount -e 172.31.0.4mkdir -p /nfs/datamount -t nfs 172.31.0.4:/nfs/data /nfs/data

在这里插入图片描述

6.2 配置默认存储

配置动态供应的默认存储类

## 创建了一个存储类
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:name: nfs-storageannotations:storageclass.kubernetes.io/is-default-class: "true"
provisioner: k8s-sigs.io/nfs-subdir-external-provisioner
parameters:archiveOnDelete: "true"  ## 删除pv的时候，pv的内容是否要备份---
apiVersion: apps/v1
kind: Deployment
metadata:name: nfs-client-provisionerlabels:app: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
spec:replicas: 1strategy:type: Recreateselector:matchLabels:app: nfs-client-provisionertemplate:metadata:labels:app: nfs-client-provisionerspec:serviceAccountName: nfs-client-provisionercontainers:- name: nfs-client-provisionerimage: registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images/nfs-subdir-external-provisioner:v4.0.2# resources:#    limits:#      cpu: 10m#    requests:#      cpu: 10mvolumeMounts:- name: nfs-client-rootmountPath: /persistentvolumesenv:- name: PROVISIONER_NAMEvalue: k8s-sigs.io/nfs-subdir-external-provisioner- name: NFS_SERVERvalue: 172.31.0.4 ## 指定自己nfs服务器地址- name: NFS_PATH  value: /nfs/data  ## nfs服务器共享的目录volumes:- name: nfs-client-rootnfs:server: 172.31.0.4path: /nfs/data
---
apiVersion: v1
kind: ServiceAccount
metadata:name: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: nfs-client-provisioner-runner
rules:- apiGroups: [""]resources: ["nodes"]verbs: ["get", "list", "watch"]- apiGroups: [""]resources: ["persistentvolumes"]verbs: ["get", "list", "watch", "create", "delete"]- apiGroups: [""]resources: ["persistentvolumeclaims"]verbs: ["get", "list", "watch", "update"]- apiGroups: ["storage.k8s.io"]resources: ["storageclasses"]verbs: ["get", "list", "watch"]- apiGroups: [""]resources: ["events"]verbs: ["create", "update", "patch"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: run-nfs-client-provisioner
subjects:- kind: ServiceAccountname: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
roleRef:kind: ClusterRolename: nfs-client-provisioner-runnerapiGroup: rbac.authorization.k8s.io
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: leader-locking-nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
rules:- apiGroups: [""]resources: ["endpoints"]verbs: ["get", "list", "watch", "create", "update", "patch"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: leader-locking-nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
subjects:- kind: ServiceAccountname: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: default
roleRef:kind: Rolename: leader-locking-nfs-client-provisionerapiGroup: rbac.authorization.k8s.io

在这里插入图片描述

6.3 集群指标监控组件

metrics-server.yaml:

apiVersion: v1
kind: ServiceAccount
metadata:labels:k8s-app: metrics-servername: metrics-servernamespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:labels:k8s-app: metrics-serverrbac.authorization.k8s.io/aggregate-to-admin: "true"rbac.authorization.k8s.io/aggregate-to-edit: "true"rbac.authorization.k8s.io/aggregate-to-view: "true"name: system:aggregated-metrics-reader
rules:
- apiGroups:- metrics.k8s.ioresources:- pods- nodesverbs:- get- list- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:labels:k8s-app: metrics-servername: system:metrics-server
rules:
- apiGroups:- ""resources:- pods- nodes- nodes/stats- namespaces- configmapsverbs:- get- list- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:labels:k8s-app: metrics-servername: metrics-server-auth-readernamespace: kube-system
roleRef:apiGroup: rbac.authorization.k8s.iokind: Rolename: extension-apiserver-authentication-reader
subjects:
- kind: ServiceAccountname: metrics-servernamespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:labels:k8s-app: metrics-servername: metrics-server:system:auth-delegator
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: system:auth-delegator
subjects:
- kind: ServiceAccountname: metrics-servernamespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:labels:k8s-app: metrics-servername: system:metrics-server
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: system:metrics-server
subjects:
- kind: ServiceAccountname: metrics-servernamespace: kube-system
---
apiVersion: v1
kind: Service
metadata:labels:k8s-app: metrics-servername: metrics-servernamespace: kube-system
spec:ports:- name: httpsport: 443protocol: TCPtargetPort: httpsselector:k8s-app: metrics-server
---
apiVersion: apps/v1
kind: Deployment
metadata:labels:k8s-app: metrics-servername: metrics-servernamespace: kube-system
spec:selector:matchLabels:k8s-app: metrics-serverstrategy:rollingUpdate:maxUnavailable: 0template:metadata:labels:k8s-app: metrics-serverspec:containers:- args:- --cert-dir=/tmp- --kubelet-insecure-tls- --secure-port=4443- --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname- --kubelet-use-node-status-portimage: registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images/metrics-server:v0.4.3imagePullPolicy: IfNotPresentlivenessProbe:failureThreshold: 3httpGet:path: /livezport: httpsscheme: HTTPSperiodSeconds: 10name: metrics-serverports:- containerPort: 4443name: httpsprotocol: TCPreadinessProbe:failureThreshold: 3httpGet:path: /readyzport: httpsscheme: HTTPSperiodSeconds: 10securityContext:readOnlyRootFilesystem: truerunAsNonRoot: truerunAsUser: 1000volumeMounts:- mountPath: /tmpname: tmp-dirnodeSelector:kubernetes.io/os: linuxpriorityClassName: system-cluster-criticalserviceAccountName: metrics-servervolumes:- emptyDir: {}name: tmp-dir
---
apiVersion: apiregistration.k8s.io/v1
kind: APIService
metadata:labels:k8s-app: metrics-servername: v1beta1.metrics.k8s.io
spec:group: metrics.k8s.iogroupPriorityMinimum: 100insecureSkipTLSVerify: trueservice:name: metrics-servernamespace: kube-systemversion: v1beta1versionPriority: 100

在这里插入图片描述

kubectl top nodes

在这里插入图片描述

7.安装KubeSphere

7.1 下载核心配置文件
wget https://github.com/kubesphere/ks-installer/releases/download/v3.1.1/kubesphere-installer.yamlwget https://github.com/kubesphere/ks-installer/releases/download/v3.1.1/cluster-configuration.yaml
7.2 执行配置文件

通过上面的wget下载的配置文件, 通过kubectl apply -f x.yaml执行:

kubectl apply -f kubesphere-installer.yamlkubectl apply -f cluster-configuration.yaml

查看进度:

kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l app=ks-install -o jsonpath='{.items[0].metadata.name}') -f

在这里插入图片描述

解决etcd监控证书找不到问题

kubectl -n kubesphere-monitoring-system create secret generic kube-etcd-client-certs  --from-file=etcd-client-ca.crt=/etc/kubernetes/pki/etcd/ca.crt  --from-file=etcd-client.crt=/etc/kubernetes/pki/apiserver-etcd-client.crt  --from-file=etcd-client.key=/etc/kubernetes/pki/apiserver-etcd-client.key
7.3 配置文件
7.3.1 kubesphere-installer.yaml
---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:name: clusterconfigurations.installer.kubesphere.io
spec:group: installer.kubesphere.ioversions:- name: v1alpha1served: truestorage: truescope: Namespacednames:plural: clusterconfigurationssingular: clusterconfigurationkind: ClusterConfigurationshortNames:- cc---
apiVersion: v1
kind: Namespace
metadata:name: kubesphere-system---
apiVersion: v1
kind: ServiceAccount
metadata:name: ks-installernamespace: kubesphere-system---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:name: ks-installer
rules:
- apiGroups:- ""resources:- '*'verbs:- '*'
- apiGroups:- appsresources:- '*'verbs:- '*'
- apiGroups:- extensionsresources:- '*'verbs:- '*'
- apiGroups:- batchresources:- '*'verbs:- '*'
- apiGroups:- rbac.authorization.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- apiregistration.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- apiextensions.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- tenant.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- certificates.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- devops.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- monitoring.coreos.comresources:- '*'verbs:- '*'
- apiGroups:- logging.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- jaegertracing.ioresources:- '*'verbs:- '*'
- apiGroups:- storage.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- admissionregistration.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- policyresources:- '*'verbs:- '*'
- apiGroups:- autoscalingresources:- '*'verbs:- '*'
- apiGroups:- networking.istio.ioresources:- '*'verbs:- '*'
- apiGroups:- config.istio.ioresources:- '*'verbs:- '*'
- apiGroups:- iam.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- notification.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- auditing.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- events.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- core.kubefed.ioresources:- '*'verbs:- '*'
- apiGroups:- installer.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- storage.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- security.istio.ioresources:- '*'verbs:- '*'
- apiGroups:- monitoring.kiali.ioresources:- '*'verbs:- '*'
- apiGroups:- kiali.ioresources:- '*'verbs:- '*'
- apiGroups:- networking.k8s.ioresources:- '*'verbs:- '*'
- apiGroups:- kubeedge.kubesphere.ioresources:- '*'verbs:- '*'
- apiGroups:- types.kubefed.ioresources:- '*'verbs:- '*'---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: ks-installer
subjects:
- kind: ServiceAccountname: ks-installernamespace: kubesphere-system
roleRef:kind: ClusterRolename: ks-installerapiGroup: rbac.authorization.k8s.io---
apiVersion: apps/v1
kind: Deployment
metadata:name: ks-installernamespace: kubesphere-systemlabels:app: ks-install
spec:replicas: 1selector:matchLabels:app: ks-installtemplate:metadata:labels:app: ks-installspec:serviceAccountName: ks-installercontainers:- name: installerimage: kubesphere/ks-installer:v3.1.1imagePullPolicy: "Always"resources:limits:cpu: "1"memory: 1Girequests:cpu: 20mmemory: 100MivolumeMounts:- mountPath: /etc/localtimename: host-timevolumes:- hostPath:path: /etc/localtimetype: ""name: host-time
7.3.2 cluster-configuration.yaml
---
apiVersion: installer.kubesphere.io/v1alpha1
kind: ClusterConfiguration
metadata:name: ks-installernamespace: kubesphere-systemlabels:version: v3.1.1
spec:persistence:storageClass: ""        # If there is no default StorageClass in your cluster, you need to specify an existing StorageClass here.authentication:jwtSecret: ""           # Keep the jwtSecret consistent with the Host Cluster. Retrieve the jwtSecret by executing "kubectl -n kubesphere-system get cm kubesphere-config -o yaml | grep -v "apiVersion" | grep jwtSecret" on the Host Cluster.local_registry: ""        # Add your private registry address if it is needed.etcd:monitoring: true       # Enable or disable etcd monitoring dashboard installation. You have to create a Secret for etcd before you enable it.endpointIps: 172.31.0.4  # etcd cluster EndpointIps. It can be a bunch of IPs here.port: 2379              # etcd port.tlsEnable: truecommon:redis:enabled: trueopenldap:enabled: trueminioVolumeSize: 20Gi # Minio PVC size.openldapVolumeSize: 2Gi   # openldap PVC size.redisVolumSize: 2Gi # Redis PVC size.monitoring:# type: external   # Whether to specify the external prometheus stack, and need to modify the endpoint at the next line.endpoint: http://prometheus-operated.kubesphere-monitoring-system.svc:9090 # Prometheus endpoint to get metrics data.es:   # Storage backend for logging, events and auditing.# elasticsearchMasterReplicas: 1   # The total number of master nodes. Even numbers are not allowed.# elasticsearchDataReplicas: 1     # The total number of data nodes.elasticsearchMasterVolumeSize: 4Gi   # The volume size of Elasticsearch master nodes.elasticsearchDataVolumeSize: 20Gi    # The volume size of Elasticsearch data nodes.logMaxAge: 7                     # Log retention time in built-in Elasticsearch. It is 7 days by default.elkPrefix: logstash              # The string making up index names. The index name will be formatted as ks-<elk_prefix>-log.basicAuth:enabled: falseusername: ""password: ""externalElasticsearchUrl: ""externalElasticsearchPort: ""console:enableMultiLogin: true  # Enable or disable simultaneous logins. It allows different users to log in with the same account at the same time.port: 30880alerting:                # (CPU: 0.1 Core, Memory: 100 MiB) It enables users to customize alerting policies to send messages to receivers in time with different time intervals and alerting levels to choose from.enabled: true         # Enable or disable the KubeSphere Alerting System.# thanosruler:#   replicas: 1#   resources: {}auditing:                # Provide a security-relevant chronological set of records，recording the sequence of activities happening on the platform, initiated by different tenants.enabled: true         # Enable or disable the KubeSphere Auditing Log System. devops:                  # (CPU: 0.47 Core, Memory: 8.6 G) Provide an out-of-the-box CI/CD system based on Jenkins, and automated workflow tools including Source-to-Image & Binary-to-Image.enabled: true             # Enable or disable the KubeSphere DevOps System.jenkinsMemoryLim: 2Gi      # Jenkins memory limit.jenkinsMemoryReq: 1500Mi   # Jenkins memory request.jenkinsVolumeSize: 8Gi     # Jenkins volume size.jenkinsJavaOpts_Xms: 512m  # The following three fields are JVM parameters.jenkinsJavaOpts_Xmx: 512mjenkinsJavaOpts_MaxRAM: 2gevents:                  # Provide a graphical web console for Kubernetes Events exporting, filtering and alerting in multi-tenant Kubernetes clusters.enabled: true         # Enable or disable the KubeSphere Events System.ruler:enabled: truereplicas: 2logging:                 # (CPU: 57 m, Memory: 2.76 G) Flexible logging functions are provided for log query, collection and management in a unified console. Additional log collectors can be added, such as Elasticsearch, Kafka and Fluentd.enabled: true         # Enable or disable the KubeSphere Logging System.logsidecar:enabled: truereplicas: 2metrics_server:                    # (CPU: 56 m, Memory: 44.35 MiB) It enables HPA (Horizontal Pod Autoscaler).enabled: false                   # Enable or disable metrics-server.monitoring:storageClass: ""                 # If there is an independent StorageClass you need for Prometheus, you can specify it here. The default StorageClass is used by default.# prometheusReplicas: 1          # Prometheus replicas are responsible for monitoring different segments of data source and providing high availability.prometheusMemoryRequest: 400Mi   # Prometheus request memory.prometheusVolumeSize: 20Gi       # Prometheus PVC size.# alertmanagerReplicas: 1          # AlertManager Replicas.multicluster:clusterRole: none  # host | member | none  # You can install a solo cluster, or specify it as the Host or Member Cluster.network:networkpolicy: # Network policies allow network isolation within the same cluster, which means firewalls can be set up between certain instances (Pods).# Make sure that the CNI network plugin used by the cluster supports NetworkPolicy. There are a number of CNI network plugins that support NetworkPolicy, including Calico, Cilium, Kube-router, Romana and Weave Net.enabled: true # Enable or disable network policies.ippool: # Use Pod IP Pools to manage the Pod network address space. Pods to be created can be assigned IP addresses from a Pod IP Pool.type: calico # Specify "calico" for this field if Calico is used as your CNI plugin. "none" means that Pod IP Pools are disabled.topology: # Use Service Topology to view Service-to-Service communication based on Weave Scope.type: none # Specify "weave-scope" for this field to enable Service Topology. "none" means that Service Topology is disabled.openpitrix: # An App Store that is accessible to all platform tenants. You can use it to manage apps across their entire lifecycle.store:enabled: true # Enable or disable the KubeSphere App Store.servicemesh:         # (0.3 Core, 300 MiB) Provide fine-grained traffic management, observability and tracing, and visualized traffic topology.enabled: true     # Base component (pilot). Enable or disable KubeSphere Service Mesh (Istio-based).kubeedge:          # Add edge nodes to your cluster and deploy workloads on edge nodes.enabled: true   # Enable or disable KubeEdge.cloudCore:nodeSelector: {"node-role.kubernetes.io/worker": ""}tolerations: []cloudhubPort: "10000"cloudhubQuicPort: "10001"cloudhubHttpsPort: "10002"cloudstreamPort: "10003"tunnelPort: "10004"cloudHub:advertiseAddress: # At least a public IP address or an IP address which can be accessed by edge nodes must be provided.- ""            # Note that once KubeEdge is enabled, CloudCore will malfunction if the address is not provided.nodeLimit: "100"service:cloudhubNodePort: "30000"cloudhubQuicNodePort: "30001"cloudhubHttpsNodePort: "30002"cloudstreamNodePort: "30003"tunnelNodePort: "30004"edgeWatcher:nodeSelector: {"node-role.kubernetes.io/worker": ""}tolerations: []edgeWatcherAgent:nodeSelector: {"node-role.kubernetes.io/worker": ""}tolerations: []

打印的日志最后的成功的说明:

在这里插入图片描述

全部的pod都成功启动:

在这里插入图片描述

访问页面:

在这里插入图片描述

输入密码:

在这里插入图片描述

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.hqwc.cn/news/669699.html

如若内容造成侵权/违法违规/事实不符，请联系编程知识网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

连锁店收银系统为什么贵

连锁店收银系统为什么贵

连锁店收银系统会比单机收银系统价格高一些&#xff0c;主要有三个方面的原因&#xff1a; 复杂的功能需求 连锁店收银系统需要管理多个分店的进销存、库存调拨、门店订货等操作&#xff0c;以及会员管理&#xff0c;商淘云连锁收银系统还提供了连锁线上商城等功能。这些功能的…
阅读更多...
TCP粘包拆包问题解决之道

TCP粘包拆包问题解决之道

文章目录 1. TCP粘包/拆包问题2. TCP粘包/拆包发生的原因3. TCP粘包解决策略 1. TCP粘包/拆包问题 假设客户端分别发送了两个数据包D1和D2&#xff0c;由于服务端一次读取到的字节数是不确定的&#xff0c;故存在以下四种情况。 服务端分两次读取到了两个独立的数据包&#xf…
阅读更多...
金三银四面试题（二十五）：策略模式知多少？

金三银四面试题（二十五）：策略模式知多少？

什么是策略模式 策略模式&#xff08;Strategy Pattern&#xff09;是一种行为型设计模式&#xff0c;旨在定义一系列算法&#xff0c;将每个算法封装到一个独立的类中&#xff0c;使它们可以互换。策略模式让算法的变化独立于使用它们的客户端&#xff0c;使得客户端可以根据…
阅读更多...
【ACM出版】第四届控制与智能机器人国际学术会议（ICCIR 2024）

【ACM出版】第四届控制与智能机器人国际学术会议（ICCIR 2024）

第四届控制与智能机器人国际学术会议&#xff08;ICCIR 2024&#xff09; 2024 4th International Conference on Control and Intelligent Robotics 2024年6月21日-23日 | 中国-广州 官网&#xff1a;www.ic-cir.org EI、Scopus双检索 投稿免费参会、口头汇报及海报展示 四…
阅读更多...
【数据库】MySQL安装与卸载

【数据库】MySQL安装与卸载

文章目录 [toc]MySQL下载网盘链接下载网址 MySQL安装解压生成data文件安装MySQL启动MySQL服务 MySQL登录设置root用户密码 环境变量配置MySQL卸载 个人主页&#xff1a;丷从心 系列专栏&#xff1a;MySQL 学习指南&#xff1a;数据库 MySQL下载 网盘链接 链接&#xff1a;h…
阅读更多...
7-35 有理数均值

7-35 有理数均值

题目链接&#xff1a;7-35 有理数均值 一. 题目 1. 题目 2. 输入输出样例 3. 限制 二、代码 1. 代码实现 #include <iostream> using namespace std;// 计算公约数 int calGcd(int a, int b) {int gcd;bool negative false;if (a a / b * b) { // b整除areturn b;}…
阅读更多...
C++（程序的内存分区）

C++（程序的内存分区）

程序的内存分区模型 C程序在执行时&#xff0c;将内存划分为4个区域 1.代码区&#xff1a;存放函数的二进制代码&#xff0c;由操作系统进行管理 2.全局区&#xff1a;存放全局变量和静态变量以及常量 3.栈区&#xff1a;由编译器自动分配释放&#xff0c;存放函数的参数值&…
阅读更多...
通过Nginx转发admin连接licloud-api-develop接口

通过Nginx转发admin连接licloud-api-develop接口

1.需求配置 在本地环境部署一套开发环境&#xff0c;方便开发金磊调试功能 所使用到的服务有nginx&#xff0c;mysql&#xff0c;rabbitmq&#xff0c;redis&#xff0c;docker 服务安装网上都有教程这里就不一一列举出来了&#xff0c;服务都配置好之后 开始组建开发环境 2…
阅读更多...
图像处理（二）

图像处理（二）

图像处理&#xff08;2&#xff09; 裁剪图片 from skimage import io,dataiimg io.imread(rD:\工坊\图像处理\十个勤天2.png)roiiimg[50:150,120:200,:]io.imshow(roi) 运行结果&#xff1a; 将图片进行二值化 from skimage import io,data,colorimg io.imread(r"…
阅读更多...
数据分析：转录本ID和基因ID转换

数据分析：转录本ID和基因ID转换

前言 在使用kallisto等基于cDNA数据库注释软件时&#xff0c;获得的gene expression matrix的gene id是transcript id。后续在做数据分析时&#xff0c;需要将其转换成gene symbol。以下介绍两种转换方法。 第一种方法 在GitHub上有人开发了可以做该种转换的R包&#xff0c;…
阅读更多...
启航新篇，量算未来 | 量子计算创新论坛成功举办！

启航新篇，量算未来 | 量子计算创新论坛成功举办！

4月28日下午&#xff0c;在2024中国移动算力网络大会——未来启航•量子计算创新论坛在苏州金鸡湖国际会议中心举办。本次论坛以“创新求发展&#xff0c;合作赢未来”为主题&#xff0c;旨在汇聚行业前沿思想&#xff0c;共谋创新发展大计&#xff0c;共同推动我国量子计算产业…
阅读更多...
网络性能测试工具iperf3 和iperf

网络性能测试工具iperf3 和iperf

目录 1. iperf工具介绍 2. 下载安装 3. 使用方法 1. iperf工具介绍 iperf 是一个网络性能测试工具&#xff0c;用于测量网络带宽和性能。它可以在客户端和服务器之间进行数据传输&#xff0c;并提供了丰富的选项来配置测试参数和输出格式。 iperf 和 iperf3 都是用于测量网…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023