1、引入第三方库
链接：https://pan.baidu.com/s/1JC-Bi_Qgts5a-tGo28JcTQ?pwd=6533
提取码：6533
将第三方库 放在libs包里，并在pom文件中增加依赖
<dependency><groupId>libsocket-can-java</groupId><artifactId>libsocket-can-java</artifactId><version>0.1.0</version><scope>system</scope><systemPath>${project.basedir}/libs/libsocket-can-java.jar</systemPath>
</dependency>
2、编写CAN口读写数据
@SpringBootApplication
public class LibsocketApplication {public static void main(String[] args) throws Exception {SpringApplication.run(LibsocketApplication.class, args);System.out.println("Running tests!");final CanSocket socket = new CanSocket(CanSocket.Mode.RAW);final CanSocket.CanInterface canif = new CanSocket.CanInterface(socket, "can0");socket.bind(canif);System.out.println("bind success !");socket.send(new CanSocket.CanFrame(canif,new CanSocket.CanId(0x5), new byte[] {1,2,3,4,5,6,7,8}));while (true) {CanSocket.CanFrame canFrame = socket.recv(canif.getInterfaceIndex());System.out.println("receive data length" + canFrame.getData().length);System.out.println("canId:" + canFrame.getCanId());System.out.println("data:" + bytesToHexString(canFrame.getData()));}public static String bytesToHexString(byte[] src){StringBuilder stringBuilder = new StringBuilder();if (src == null || src.length <= 0) {return null;}for (int i = 0; i < src.length; i++) {int v = src[i] & 0xFF;String hv = Integer.toHexString(v);if (hv.length() < 2) {stringBuilder.append(0);}stringBuilder.append(hv);}return stringBuilder.toString();}}3、在树莓派配置运行
3.1 配置 mcp2515模块的驱动
sudo nano /boot/config.txt
dtparam=i2c_arm=on
dtparam=i2c0,pins_44_45
dtoverlay=i2c-rtc,pcf8563,i2c_csi_dsi
dtparam=spi=on
dtoverlay=spi1-2cs
dtoverlay=mcp2515-can1,oscillator=12000000,interrupt=25
dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=24
dtoverlay=mcp2515-can2,oscillator=12000000,interrupt=23
dtparam=audio=on
验证安装
dmesg | grep -i can
3.2 安装CAN口工具
sudo apt install can-utils
3.3 启动CAN口
sudo ip link set can0 up type can bitrate 500000
3.4 查看CAN口网络
ifconfig -a
3.5 模拟发送CAN消息
发送CAN消息
cansend can0 300#1880E0A80100
监听CAN口
candump can0 -L
3.6 使用java程序监听CAN口
