一、本地yum源
- 镜像挂载到本地
mkdir /mnt/cdrom
mount /dev/sr0 /mnt/cdrom/
[root@test yum.repos.d]# df -h
......
/dev/sr0 4.4G 4.4G 0 100% /mnt/centos7
- 将原有源进行备份（处理方式自行决定）
cd /etc/yum.repos.d && mkdir bak && mv * bak/
- 编写本地repo文件
vim local.repo
yum命令默认在
/etc/yum.repos.d目录下查找以.repo结尾文件
[local]
name=local_yum
baseurl=file:///mnt/cdrom
gpgcheck=0
enabled=1
#库名称
[local]
#名称描述
name=local_yum
# 软件包URL
# baseurl=http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
baseurl=file:///media/cdrom #yum源目录，源地址为rpm的目录
#检查GPG-KEY，0为不检查，1为检查
gpgcheck=0
#是否用该yum源，0为禁用，1为使用
enabled=1
#gpgcheck=0时无需配置
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
- 清空缓存，建立缓存
yum clean all && yum makecache
参考：https://syxdevcode.github.io/2020/05/11/Centos7%20%E6%8C%82%E8%BD%BDiso%E9%95%9C%E5%83%8F(yum%E7%A6%BB%E7%BA%BF%E5%AE%89%E8%A3%85)/
二、公共yum源
1. Centos7yum源更新
手动选择源
source <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirrors.sh)
1.1 基于手动安装源改良（推荐）
改良后无需选择，自动更新为阿里yum源
#!/bin/bash
## Author: SuperManito
## Modified: 2024-07-31
## License: MIT
## GitHub: https://github.com/SuperManito/LinuxMirrors
## Website: https://linuxmirrors.cn## 软件源列表
# 国内格式："软件源名称@软件源地址"
mirror_list_default=("阿里云@mirrors.aliyun.com""腾讯云@mirrors.tencent.com""华为云@repo.huaweicloud.com""网易@mirrors.163.com""火山引擎@mirrors.volces.com""清华大学@mirrors.tuna.tsinghua.edu.cn""北京大学@mirrors.pku.edu.cn""浙江大学@mirrors.zju.edu.cn""南京大学@mirrors.nju.edu.cn""兰州大学@mirror.lzu.edu.cn""上海交通大学@mirror.sjtu.edu.cn""重庆邮电大学@mirrors.cqupt.edu.cn""中国科学技术大学@mirrors.ustc.edu.cn""中国科学院软件研究所@mirror.iscas.ac.cn"
)
# 中国大陆教育网格式："软件源名称@软件源地址"
mirror_list_edu=("清华大学@mirrors.tuna.tsinghua.edu.cn""北京大学@mirrors.pku.edu.cn""南京大学@mirrors.nju.edu.cn""重庆大学@mirrors.cqu.edu.cn""兰州大学@mirror.lzu.edu.cn""浙江大学@mirrors.zju.edu.cn""山东大学@mirrors.sdu.edu.cn""吉林大学@mirrors.jlu.edu.cn""上海科技大学@mirrors.shanghaitech.edu.cn""南方科技大学@mirrors.sustech.edu.cn""南京邮电大学@mirrors.njupt.edu.cn""南京工业大学@mirrors.njtech.edu.cn""电子科技大学@mirrors.uestc.cn""北京交通大学@mirror.bjtu.edu.cn""北京邮电大学@mirrors.bupt.edu.cn""齐鲁工业大学@mirrors.qlu.edu.cn""华南农业大学@mirrors.scau.edu.cn""西安交通大学@mirrors.xjtu.edu.cn""江西理工大学@mirrors.jxust.edu.cn""重庆邮电大学@mirrors.cqupt.edu.cn""华中科技大学@mirrors.hust.edu.cn""南阳理工学院@mirror.nyist.edu.cn""武昌首义学院@mirrors.wsyu.edu.cn""荆楚理工学院@mirrors.jcut.edu.cn""北京外国语大学@mirrors.bfsu.edu.cn""中国科学技术大学@mirrors.ustc.edu.cn""西北农林科技大学@mirrors.nwafu.edu.cn""大连东软信息学院@mirrors.neusoft.edu.cn""上海交通大学（思源）@mirror.sjtu.edu.cn""上海交通大学（致远）@mirrors.sjtug.sjtu.edu.cn"
)
# 海外格式："洲 · 软件源名称 · 国家/地区@软件源地址"，修改前请先前往官网阅读添加规范
mirror_list_abroad=("亚洲 · xTom · 香港@mirrors.xtom.hk""亚洲 · 01Link · 香港@mirror.01link.hk""亚洲 · 新加坡国立大学(NUS) · 新加坡@download.nus.edu.sg/mirror""亚洲 · SG.GS · 新加坡@mirror.sg.gs""亚洲 · xTom · 新加坡@mirrors.xtom.sg""亚洲 · 自由软件实验室(NCHC) · 台湾@free.nchc.org.tw""亚洲 · OSS Planet · 台湾@mirror.ossplanet.net""亚洲 · 国立阳明交通大学 · 台湾@linux.cs.nctu.edu.tw""亚洲 · 淡江大学 · 台湾@ftp.tku.edu.tw""亚洲 · AniGil Linux Archive · 韩国@mirror.anigil.com""亚洲 · 工业网络安全中心(ICSCoE) · 日本@ftp.udx.icscoe.jp/Linux""亚洲 · 北陆先端科学技术大学院大学(JAIST) · 日本@ftp.jaist.ac.jp/pub/Linux""亚洲 · 山形大学 · 日本@linux2.yz.yamagata-u.ac.jp/pub/Linux""亚洲 · xTom · 日本@mirrors.xtom.jp""亚洲 · GB Network Solutions · 马来西亚@mirrors.gbnetwork.com""亚洲 · 孔敬大学 · 泰国@mirror.kku.ac.th""欧洲 · Vorboss Ltd · 英国@mirror.vorboss.net""欧洲 · QuickHost · 英国@mirror.quickhost.uk""欧洲 · dogado · 德国@mirror.dogado.de""欧洲 · xTom · 德国@mirrors.xtom.de""欧洲 · 亚琛工业大学(RWTH Aachen) · 德国@ftp.halifax.rwth-aachen.de""欧洲 · 德累斯顿大学(AG DSN) · 德国@ftp.agdsn.de""欧洲 · CCIN2P3 · 法国@mirror.in2p3.fr/pub/linux""欧洲 · Ircam · 法国@mirrors.ircam.fr/pub""欧洲 · Crans · 法国@eclats.crans.org""欧洲 · CRIHAN · 法国@ftp.crihan.fr""欧洲 · xTom · 荷兰@mirrors.xtom.nl""欧洲 · DataPacket · 荷兰@mirror.datapacket.com""欧洲 · Linux Kernel · 荷兰@eu.edge.kernel.org""欧洲 · xTom · 爱沙尼亚@mirrors.xtom.ee""欧洲 · netsite · 丹麦@mirror.netsite.dk""欧洲 · Dotsrc · 丹麦@mirrors.dotsrc.org""欧洲 · Academic Computer Club · 瑞典@mirror.accum.se""欧洲 · Lysator · 瑞典@ftp.lysator.liu.se""欧洲 · Yandex · 俄罗斯@mirror.yandex.ru""欧洲 · ia64 · 俄罗斯@mirror.linux-ia64.org""欧洲 · Truenetwork · 俄罗斯@mirror.truenetwork.ru""欧洲 · Belgian Research Network · 比利时@ftp.belnet.be/mirror""欧洲 · 克里特大学计算机中心 · 希腊@ftp.cc.uoc.gr/mirrors/linux""欧洲 · 马萨里克大学信息学院 · 捷克@ftp.fi.muni.cz/pub/linux""欧洲 · 捷克理工大学学生会俱乐部(Silicon Hill) · 捷克@ftp.sh.cvut.cz""欧洲 · Vodafone · 捷克@mirror.karneval.cz/pub/linux""欧洲 · CZ.NIC · 捷克@mirrors.nic.cz""欧洲 · 苏黎世联邦理工学院 · 瑞士@mirror.ethz.ch""北美 · Linux Kernel · 美国@mirrors.kernel.org""北美 · 麻省理工学院(MIT) · 美国@mirrors.mit.edu""北美 · 普林斯顿大学数学系 · 美国@mirror.math.princeton.edu/pub""北美 · 俄勒冈州立大学开源实验室 · 美国@ftp-chi.osuosl.org/pub""北美 · Fremont Cabal Internet Exchange(FCIX) · 美国@mirror.fcix.net""北美 · xTom · 美国@mirrors.xtom.com""北美 · Steadfast · 美国@mirror.steadfast.net""北美 · 不列颠哥伦比亚大学 · 加拿大@mirror.it.ubc.ca""北美 · GoCodeIT · 加拿大@mirror.xenyth.net""北美 · Switch · 加拿大@mirrors.switch.ca""南美 · PoP-SC · 巴西@mirror.pop-sc.rnp.br/mirror""南美 · 蓬塔格罗萨州立大学 · 巴西@mirror.uepg.br""南美 · UFSCar · 巴西@mirror.ufscar.br""南美 · Sysarmy Community · 阿根廷@mirrors.eze.sysarmy.com""大洋 · Fremont Cabal Internet Exchange(FCIX) · 澳大利亚@gsl-syd.mm.fcix.net""大洋 · AARNet · 澳大利亚@mirror.aarnet.edu.au/pub""大洋 · DataMossa · 澳大利亚@mirror.datamossa.io""大洋 · Amaze · 澳大利亚@mirror.amaze.com.au""大洋 · xTom · 澳大利亚@mirrors.xtom.au""大洋 · Over the Wire · 澳大利亚@mirror.overthewire.com.au""大洋 · Free Software Mirror Group · 新西兰@mirror.fsmg.org.nz""非洲 · Liquid Telecom · 肯尼亚@mirror.liquidtelecom.com""非洲 · Dimension Data · 南非@mirror.dimensiondata.com"
)## 配置需要区分公网地址和内网地址的软件源（不分地域）
# 配置方法：需要同时在两个数组变量中分别定义软件源地址，并且保证排列顺序一致
# 工作原理：当检测到用户所选择的软件源地址在 “软件源公网地址列表” 中时就会询问是否切换为内网地址，然后在 “软件源内网地址列表” 从相同的位置提取内网地址
# 软件源公网地址列表
mirror_list_extranet=("mirrors.aliyun.com""mirrors.tencent.com""repo.huaweicloud.com""mirrors.volces.com"
)
# 软件源内网地址列表
mirror_list_intranet=("mirrors.cloud.aliyuncs.com""mirrors.tencentyun.com""mirrors.myhuaweicloud.com""mirrors.ivolces.com"
)################################################################################ 定义系统判定变量
SYSTEM_DEBIAN="Debian"
SYSTEM_UBUNTU="Ubuntu"
SYSTEM_KALI="Kali"
SYSTEM_DEEPIN="Deepin"
SYSTEM_LINUX_MINT="Linuxmint"
SYSTEM_REDHAT="RedHat"
SYSTEM_RHEL="Red Hat Enterprise Linux"
SYSTEM_CENTOS="CentOS"
SYSTEM_CENTOS_STREAM="CentOS Stream"
SYSTEM_ROCKY="Rocky"
SYSTEM_ALMALINUX="AlmaLinux"
SYSTEM_FEDORA="Fedora"
SYSTEM_OPENCLOUDOS="OpenCloudOS"
SYSTEM_OPENEULER="openEuler"
SYSTEM_OPENSUSE="openSUSE"
SYSTEM_ARCH="Arch"
SYSTEM_ALPINE="Alpine"
SYSTEM_GENTOO="Gentoo"## 定义系统版本文件
File_LinuxRelease=/etc/os-release
File_RedHatRelease=/etc/redhat-release
File_DebianVersion=/etc/debian_version
File_ArmbianRelease=/etc/armbian-release
File_OpenCloudOSRelease=/etc/opencloudos-release
File_openEulerRelease=/etc/openEuler-release
File_ArchLinuxRelease=/etc/arch-release
File_AlpineRelease=/etc/alpine-release
File_GentooRelease=/etc/gentoo-release
File_ProxmoxVersion=/etc/pve/.version## 定义软件源相关文件或目录
File_DebianSourceList=/etc/apt/sources.list
File_DebianSourceListBackup=/etc/apt/sources.list.bak
File_DebianSources=/etc/apt/sources.list.d/debian.sources
File_DebianSourcesBackup=/etc/apt/sources.list.d/debian.sources.bak
File_UbuntuSources=/etc/apt/sources.list.d/ubuntu.sources
File_UbuntuSourcesBackup=/etc/apt/sources.list.d/ubuntu.sources.bak
File_ArmbianSourceList=/etc/apt/sources.list.d/armbian.list
File_ArmbianSourceListBackup=/etc/apt/sources.list.d/armbian.list.bak
File_ProxmoxSourceList=/etc/apt/sources.list.d/pve-no-subscription.list
File_ProxmoxSourceListBackup=/etc/apt/sources.list.d/pve-no-subscription.list.bak
File_LinuxMintSourceList=/etc/apt/sources.list.d/official-package-repositories.list
File_LinuxMintSourceListBackup=/etc/apt/sources.list.d/official-package-repositories.list.bak
File_ArchLinuxMirrorList=/etc/pacman.d/mirrorlist
File_ArchLinuxMirrorListBackup=/etc/pacman.d/mirrorlist.bak
File_AlpineRepositories=/etc/apk/repositories
File_AlpineRepositoriesBackup=/etc/apk/repositories.bak
File_GentooMakeConf=/etc/portage/make.conf
File_GentooMakeConfBackup=/etc/portage/make.conf.bak
File_GentooReposConf=/etc/portage/repos.conf/gentoo.conf
File_GentooReposConfBackup=/etc/portage/repos.conf/gentoo.conf.bak
Dir_GentooReposConf=/etc/portage/repos.conf
Dir_DebianExtendSource=/etc/apt/sources.list.d
Dir_DebianExtendSourceBackup=/etc/apt/sources.list.d.bak
Dir_YumRepos=/etc/yum.repos.d
Dir_YumReposBackup=/etc/yum.repos.d.bak
Dir_openSUSERepos=/etc/zypp/repos.d
Dir_openSUSEReposBackup=/etc/zypp/repos.d.bak## 定义颜色变量
RED='\033[31m'
GREEN='\033[32m'
YELLOW='\033[33m'
BLUE='\033[34m'
PURPLE='\033[35m'
AZURE='\033[36m'
PLAIN='\033[0m'
BOLD='\033[1m'
SUCCESS="[\033[1;32m成功${PLAIN}]"
COMPLETE="[\033[1;32m完成${PLAIN}]"
WARN="[\033[1;5;33m注意${PLAIN}]"
ERROR="[\033[1;31m错误${PLAIN}]"
FAIL="[\033[1;31m失败${PLAIN}]"
TIP="[\033[1;32m提示${PLAIN}]"
WORKING="[\033[1;36m >_ ${PLAIN}]"function main() {permission_judgmentcollect_system_infocheck_command_optionsrun_startchoose_mirrorschoose_protocolchoose_install_epel_packagesclose_firewall_servicebackup_original_mirrorsremove_original_mirrorschange_mirrors_mainupgrade_softwarerun_end
}## 处理命令选项
function handle_command_options() {## 命令帮助function output_command_help() {echo -e "\n命令选项(参数名/含义/参数值)：--abroad 使用海外软件源 无--edu 使用中国大陆教育网软件源 无--source 指定软件源地址(域名或IP) 地址--source-epel 指定 EPEL 附加软件包仓库的软件源地址(域名或IP) 地址--source-security 指定 Debian 系统 security 仓库的软件源地址(域名或IP) 地址--source-vault 指定 CentOS/AlmaLinux 系统 vault 仓库的软件源地址(域名或IP) 地址--source-portage 指定 Gentoo 系统 portage 仓库的软件源地址(域名或IP) 地址--branch 指定软件源分支(路径) 分支名--branch-epel 指定 EPEL 附加软件包仓库的软件源分支(路径) 分支名--branch-security 指定 Debian 系统 security 仓库的软件源分支(路径) 分支名--branch-vault 指定 CentOS/AlmaLinux 系统 vault 仓库的软件源分支(路径) 分支名--branch-portage 指定 Gentoo 系统 portage 仓库的软件源分支(路径) 分支名--codename 指定 Debian 系操作系统的版本代号 代号名称--protocol 指定 WEB 协议 http 或 https--install-epel 是否安装 EPEL 附加软件包 true 或 false--close-firewall 是否关闭防火墙 true 或 false--backup 是否备份原有软件源 true 或 false--upgrade-software 是否更新软件包 true 或 false--clean-cache 是否清理下载缓存 true 或 false--use-intranet-source 优先使用内网软件源地址 无--use-official-source 使用目标操作系统的官方软件源 无--only-epel 仅更换 EPEL 软件源模式 无--ignore-backup-tips 忽略覆盖备份提示 无--print-diff 打印源文件修改前后差异 无问题报告 https://github.com/SuperManito/LinuxMirrors/issues\n"}## 判断参数while [ $# -gt 0 ]; docase "$1" in## 海外模式--abroad)USE_ABROAD_SOURCE="true";;## 中国大陆教育网模式--edu)USE_EDU_SOURCE="true";;## 指定软件源地址--source)if [ "$2" ]; thenecho "$2" | grep -Eq "\(|\)|\[|\]|\{|\}"if [ $? -eq 0 ]; thenoutput_error "检测到无效参数值 ${BLUE}$2${PLAIN} ，请输入有效的地址！"elseSOURCE="$(echo "$2" | sed -e 's,^http[s]\?://,,g' -e 's,/$,,')"shiftfielseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--source-epel)if [ "$2" ]; thenecho "$2" | grep -Eq "\(|\)|\[|\]|\{|\}"if [ $? -eq 0 ]; thenoutput_error "检测到无效参数值 ${BLUE}$2${PLAIN} ，请输入有效的地址！"elseSOURCE_EPEL="$(echo "$2" | sed -e 's,^http[s]\?://,,g' -e 's,/$,,')"shiftfielseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--source-security)if [ "$2" ]; thenecho "$2" | grep -Eq "\(|\)|\[|\]|\{|\}"if [ $? -eq 0 ]; thenoutput_error "检测到无效参数值 ${BLUE}$2${PLAIN} ，请输入有效的地址！"elseSOURCE_SECURITY="$(echo "$2" | sed -e 's,^http[s]\?://,,g' -e 's,/$,,')"shiftfielseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--source-vault)if [ "$2" ]; thenecho "$2" | grep -Eq "\(|\)|\[|\]|\{|\}"if [ $? -eq 0 ]; thenoutput_error "检测到无效参数值 ${BLUE}$2${PLAIN} ，请输入有效的地址！"elseSOURCE_VAULT="$(echo "$2" | sed -e 's,^http[s]\?://,,g' -e 's,/$,,')"shiftfielseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--source-portage)if [ "$2" ]; thenecho "$2" | grep -Eq "\(|\)|\[|\]|\{|\}"if [ $? -eq 0 ]; thenoutput_error "检测到无效参数值 ${BLUE}$2${PLAIN} ，请输入有效的地址！"elseSOURCE_PORTAGE="$(echo "$2" | sed -e 's,^http[s]\?://,,g' -e 's,/$,,')"shiftfielseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;## 使用官方源--use-official-source)USE_OFFICIAL_SOURCE="true";;## 指定软件源分支--branch)if [ "$2" ]; thenSOURCE_BRANCH="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--branch-epel)if [ "$2" ]; thenSOURCE_EPEL_BRANCH="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--branch-security)if [ "$2" ]; thenSOURCE_SECURITY_BRANCH="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--branch-vault)if [ "$2" ]; thenSOURCE_VAULT_BRANCH="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;--branch-portage)if [ "$2" ]; thenSOURCE_PORTAGE_BRANCH="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定软件源地址！"fi;;## 指定 Debian 系操作系统的版本代号--codename)if [ "$2" ]; thenDEBIAN_CODENAME="$2"shiftelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定版本代号！"fi;;## 优先使用内网地址--use-intranet-source)USE_INTRANET_SOURCE="true";;--intranet)## 废弃的命令选项if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)USE_INTRANET_SOURCE="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;## WEB 协议（HTTP/HTTPS）--protocol | --web-protocol)if [ "$2" ]; thencase "$2" inhttp | https | HTTP | HTTPS)WEB_PROTOCOL="$2"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 http 或 https 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 WEB 协议（HTTP/HTTPS）！"fi;;## 安装 EPEL 附加软件包--install-epel)if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)INSTALL_EPEL="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;--only-epel)ONLY_EPEL="true"INSTALL_EPEL="true";;## 关闭防火墙--close-firewall)if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)CLOSE_FIREWALL="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;## 备份原有软件源--backup)if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)BACKUP="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;## 忽略覆盖备份提示--ignore-backup-tips)IGNORE_BACKUP_TIPS="true";;## 更新软件包--upgrade-software | --updata-software)if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)UPGRADE_SOFTWARE="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;## 清理下载缓存--clean-cache)if [ "$2" ]; thencase "$2" in[Tt]rue | [Ff]alse)CLEAN_CACHE="${2,,}"shift;;*)output_error "检测到 ${BLUE}$2${PLAIN} 为无效参数值，请在该参数后指定 true 或 false 作为参数值！";;esacelseoutput_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请在该参数后指定 true 或 false 作为参数值！"fi;;## 打印源文件修改前后差异--print-diff)PRINT_DIFF="true";;## 命令帮助--help)output_command_helpexit;;*)output_error "检测到 ${BLUE}$1${PLAIN} 为无效参数，请确认后重新输入！";;esacshiftdone## 给部分命令选项赋予默认值ONLY_EPEL="${ONLY_EPEL:-"false"}"BACKUP="${BACKUP:-"true"}"USE_OFFICIAL_SOURCE="${USE_OFFICIAL_SOURCE:-"false"}"IGNORE_BACKUP_TIPS="${IGNORE_BACKUP_TIPS:-"false"}"PRINT_DIFF="${PRINT_DIFF:-"false"}"
}function run_start() {[ -z "${SOURCE}" ] && clearecho -e ' +-----------------------------------+'echo -e " | \033[0;1;35;95m⡇\033[0m \033[0;1;33;93m⠄\033[0m \033[0;1;32;92m⣀⡀\033[0m \033[0;1;36;96m⡀\033[0;1;34;94m⢀\033[0m \033[0;1;35;95m⡀⢀\033[0m \033[0;1;31;91m⡷\033[0;1;33;93m⢾\033[0m \033[0;1;32;92m⠄\033[0m \033[0;1;36;96m⡀⣀\033[0m \033[0;1;34;94m⡀\033[0;1;35;95m⣀\033[0m \033[0;1;31;91m⢀⡀\033[0m \033[0;1;33;93m⡀\033[0;1;32;92m⣀\033[0m \033[0;1;36;96m⢀⣀\033[0m |"echo -e " | \033[0;1;31;91m⠧\033[0;1;33;93m⠤\033[0m \033[0;1;32;92m⠇\033[0m \033[0;1;36;96m⠇⠸\033[0m \033[0;1;34;94m⠣\033[0;1;35;95m⠼\033[0m \033[0;1;31;91m⠜⠣\033[0m \033[0;1;33;93m⠇\033[0;1;32;92m⠸\033[0m \033[0;1;36;96m⠇\033[0m \033[0;1;34;94m⠏\033[0m \033[0;1;35;95m⠏\033[0m \033[0;1;33;93m⠣⠜\033[0m \033[0;1;32;92m⠏\033[0m \033[0;1;34;94m⠭⠕\033[0m |"echo -e ' +-----------------------------------+'echo -e ' 欢迎使用 GNU/Linux 更换系统软件源脚本'
}function run_end() {echo -e "\n---------- 脚本执行结束 ----------"echo -e "\n\033[1;34mPowered by https://linuxmirrors.cn\033[0m\n"
}## 报错退出
function output_error() {[ "$1" ] && echo -e "\n$ERROR $1\n"exit 1
}## 权限判定
function permission_judgment() {if [ $UID -ne 0 ]; thenoutput_error "权限不足，请使用 Root 用户运行本脚本"fi
}## 收集系统信息
function collect_system_info() {## 定义系统名称SYSTEM_NAME="$(cat $File_LinuxRelease | grep -E "^NAME=" | awk -F '=' '{print$2}' | sed "s/[\'\"]//g")"grep -q "PRETTY_NAME=" $File_LinuxRelease && SYSTEM_PRETTY_NAME="$(cat $File_LinuxRelease | grep -E "^PRETTY_NAME=" | awk -F '=' '{print$2}' | sed "s/[\'\"]//g")"## 定义系统版本号SYSTEM_VERSION_NUMBER="$(cat $File_LinuxRelease | grep -E "^VERSION_ID=" | awk -F '=' '{print$2}' | sed "s/[\'\"]//g")"## 定义系统IDSYSTEM_ID="$(cat $File_LinuxRelease | grep -E "^ID=" | awk -F '=' '{print$2}' | sed "s/[\'\"]//g")"## 判定当前系统派系if [ -s $File_DebianVersion ]; thenSYSTEM_FACTIONS="${SYSTEM_DEBIAN}"elif [ -s $File_openEulerRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_OPENEULER}"elif [ -f $File_ArchLinuxRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_ARCH}"elif [ -f $File_AlpineRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_ALPINE}"elif [ -f $File_GentooRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_GENTOO}"elif [ -s $File_RedHatRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_REDHAT}"elif [ -s $File_OpenCloudOSRelease ]; thenSYSTEM_FACTIONS="${SYSTEM_OPENCLOUDOS}" # 注：RedHat 判断优先级需要高于 OpenCloudOS，因为官方宣称8版本基于红帽而9版本不是elif [[ "${SYSTEM_NAME}" == *"openSUSE"* ]]; thenSYSTEM_FACTIONS="${SYSTEM_OPENSUSE}"elseoutput_error "无法判断当前运行环境！"fi## 判定系统类型、版本、版本号case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")if [ ! -x /usr/bin/lsb_release ]; thenapt-get install -y lsb-releaseif [ $? -ne 0 ]; thenoutput_error "lsb-release 软件包安装失败\n\n本脚本依赖 lsb_release 指令判断系统具体类型和版本，当前系统可能为精简安装，请自行安装后重新执行脚本！"fifiSYSTEM_JUDGMENT="$(lsb_release -is)"SYSTEM_VERSION_CODENAME="${DEBIAN_CODENAME:-"$(lsb_release -cs)"}";;"${SYSTEM_REDHAT}")SYSTEM_JUDGMENT="$(awk '{printf $1}' $File_RedHatRelease)"## 特殊系统判断# Red Hat Enterprise Linuxgrep -q "${SYSTEM_RHEL}" $File_RedHatRelease && SYSTEM_JUDGMENT="${SYSTEM_RHEL}"# CentOS Streamgrep -q "${SYSTEM_CENTOS_STREAM}" $File_RedHatRelease && SYSTEM_JUDGMENT="${SYSTEM_CENTOS_STREAM}";;*)SYSTEM_JUDGMENT="${SYSTEM_FACTIONS}";;esac## 判断系统及版本是否受适配local is_supported="true"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_DEBIAN}")if [[ "${SYSTEM_VERSION_NUMBER:0:1}" != [8-9] && "${SYSTEM_VERSION_NUMBER:0:2}" != 1[0-3] ]]; thenis_supported="false"fi;;"${SYSTEM_UBUNTU}")if [[ "${SYSTEM_VERSION_NUMBER:0:2}" != 1[4-9] && "${SYSTEM_VERSION_NUMBER:0:2}" != 2[0-4] ]]; thenis_supported="false"fi;;"${SYSTEM_LINUX_MINT}")if [[ "${SYSTEM_VERSION_NUMBER:0:2}" != 19 && "${SYSTEM_VERSION_NUMBER:0:2}" != 2[0-1] && "${SYSTEM_VERSION_NUMBER:0:2}" != 6 ]]; thenis_supported="false"fi;;"${SYSTEM_RHEL}")if [[ "${SYSTEM_VERSION_NUMBER:0:1}" != [7-9] ]]; thenis_supported="false"fi;;"${SYSTEM_CENTOS}")if [[ "${SYSTEM_VERSION_NUMBER:0:1}" != [7-8] ]]; thenis_supported="false"fi;;"${SYSTEM_CENTOS_STREAM}" | "${SYSTEM_ROCKY}" | "${SYSTEM_ALMALINUX}" | "${SYSTEM_OPENCLOUDOS}")if [[ "${SYSTEM_VERSION_NUMBER:0:1}" != [8-9] ]]; thenis_supported="false"fi;;"${SYSTEM_FEDORA}")if [[ "${SYSTEM_VERSION_NUMBER:0:2}" != [3-4][0-9] ]]; thenis_supported="false"fi;;"${SYSTEM_OPENEULER}")if [[ "${SYSTEM_VERSION_NUMBER:0:2}" != 2[1-4] ]]; thenis_supported="false"fi;;"${SYSTEM_OPENSUSE}")case "${SYSTEM_ID}" in"opensuse-leap")if [[ "${SYSTEM_VERSION_NUMBER:0:2}" != 15 ]]; thenis_supported="false"fi;;"opensuse-tumbleweed") ;;*)is_supported="false";;esac;;"${SYSTEM_KALI}" | "${SYSTEM_DEEPIN}" | "${SYSTEM_ARCH}" | "${SYSTEM_ALPINE}" | "${SYSTEM_GENTOO}")# 理论全部支持或不作判断;;*)is_supported="false";;esacif [[ "${is_supported}" == "false" ]]; thenoutput_error "当前系统版本不在本脚本的支持范围内，请前往官网查看支持列表！"fi## 判定系统处理器架构case "$(uname -m)" inx86_64)DEVICE_ARCH="x86_64";;aarch64)DEVICE_ARCH="ARM64";;armv7l)DEVICE_ARCH="ARMv7";;armv6l)DEVICE_ARCH="ARMv6";;i686)DEVICE_ARCH="x86_32";;*)DEVICE_ARCH="$(uname -m)";;esac## 定义软件源分支名称if [[ -z "${SOURCE_BRANCH}" ]]; then## 默认为系统名称小写，替换空格SOURCE_BRANCH="${SYSTEM_JUDGMENT,,}"SOURCE_BRANCH="${SOURCE_BRANCH// /-}"## 处理特殊的分支名称case "${SYSTEM_JUDGMENT}" in"${SYSTEM_DEBIAN}")case ${SYSTEM_VERSION_NUMBER:0:1} in8 | 9 | 10)SOURCE_BRANCH="debian-archive" # EOF;;*)SOURCE_BRANCH="debian";;esac;;"${SYSTEM_UBUNTU}")if [[ "${DEVICE_ARCH}" == "x86_64" ]] || [[ "${DEVICE_ARCH}" == *i?86* ]]; thenSOURCE_BRANCH="ubuntu"elseSOURCE_BRANCH="ubuntu-ports"fi;;"${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)SOURCE_BRANCH="centos-stream" # 使用 CentOS Stream 仓库;;*)SOURCE_BRANCH="centos-vault" # EOF;;esac;;"${SYSTEM_CENTOS}")if [[ "${DEVICE_ARCH}" == "x86_64" ]]; thenSOURCE_BRANCH="centos-vault" # EOFelseSOURCE_BRANCH="centos-altarch"fi;;"${SYSTEM_CENTOS_STREAM}")# 自 CentOS Stream 9 开始使用 centos-stream 仓库，旧版本使用 centos 仓库case ${SYSTEM_VERSION_NUMBER:0:1} in8)if [[ "${DEVICE_ARCH}" == "x86_64" ]]; thenSOURCE_BRANCH="centos-vault" # EOFelseSOURCE_BRANCH="centos-altarch"fi;;*)SOURCE_BRANCH="centos-stream";;esac;;"${SYSTEM_ARCH}")if [[ "${DEVICE_ARCH}" == "x86_64" ]] || [[ "${DEVICE_ARCH}" == *i?86* ]]; thenSOURCE_BRANCH="archlinux"elseSOURCE_BRANCH="archlinuxarm"fi;;esacfi## 定义软件源更新文字case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}" | "${SYSTEM_ALPINE}")SYNC_MIRROR_TEXT="更新软件源";;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")SYNC_MIRROR_TEXT="生成软件源缓存";;"${SYSTEM_OPENSUSE}")SYNC_MIRROR_TEXT="刷新软件源";;"${SYSTEM_ARCH}" | "${SYSTEM_GENTOO}")SYNC_MIRROR_TEXT="同步软件源";;esac
}## 命令选项兼容性判断
function check_command_options() {if [[ "${USE_ABROAD_SOURCE}" == "true" && "${USE_EDU_SOURCE}" == "true" ]]; thenoutput_error "两种模式不可同时使用！"fiif [[ "${DEBIAN_CODENAME}" ]]; thenif [[ "${SYSTEM_FACTIONS}" != "${SYSTEM_DEBIAN}" ]]; thenoutput_error "当前系统不支持使用指定版本代号命令选项，请确认后重试！"fifiif [[ "${INSTALL_EPEL}" == "true" || "${ONLY_EPEL}" == "true" ]]; thenif [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_FEDORA}" ]] || [[ "${SYSTEM_FACTIONS}" != "${SYSTEM_REDHAT}" && "${SYSTEM_FACTIONS}" && "${SYSTEM_OPENCLOUDOS}" || "${SYSTEM_FACTIONS}" && "${SYSTEM_OPENEULER}" ]]; thenoutput_error "当前系统不支持安装 EPEL 附件软件包故无法使用相关命令选项，请确认后重试！"fifiif [[ "${SOURCE_SECURITY}" == "true" || "${SOURCE_SECURITY_BRANCH}" == "true" ]]; thenif [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_DEBIAN}" ]]; thenoutput_error "当前系统不支持使用 security 仓库相关命令选项，请确认后重试！"fifiif [[ "${SOURCE_VAULT}" == "true" || "${SOURCE_VAULT_BRANCH}" == "true" ]]; thenif [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_CENTOS}" && "${SYSTEM_JUDGMENT}" != "${SYSTEM_RHEL}" && "${SYSTEM_JUDGMENT}" != "${SYSTEM_ALMALINUX}" ]]; thenoutput_error "当前系统不支持使用 vault 仓库相关命令选项，请确认后重试！"fifiif [[ "${SOURCE_PORTAGE}" == "true" || "${SOURCE_PORTAGE_BRANCH}" == "true" ]]; thenif [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_GENTOO}" ]]; thenoutput_error "当前系统不支持使用 portage 仓库相关命令选项，请确认后重试！"fifi
}## 选择软件源
function choose_mirrors() {## 打印软件源列表function print_mirrors_list() {local tmp_mirror_name tmp_mirror_url arr_num default_mirror_name_length tmp_mirror_name_length tmp_spaces_nums a i j## 计算字符串长度function StringLength() {local text=$1echo "${#text}"}echo -e ''local list_arr=()local list_arr_sumlist_arr_sum="$(eval echo \${#$1[@]})"for ((a = 0; a < $list_arr_sum; a++)); dolist_arr[$a]="$(eval echo \${$1[a]})"doneif [ -x /usr/bin/printf ]; thenfor ((i = 0; i < ${#list_arr[@]}; i++)); dotmp_mirror_name=$(echo "${list_arr[i]}" | awk -F '@' '{print$1}') # 软件源名称# tmp_mirror_url=$(echo "${list_arr[i]}" | awk -F '@' '{print$2}') # 软件源地址arr_num=$((i + 1))default_mirror_name_length=${2:-"30"} # 默认软件源名称打印长度## 补齐长度差异（中文的引号在等宽字体中占1格而非2格）[[ $(echo "${tmp_mirror_name}" | grep -c "“") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "“")[[ $(echo "${tmp_mirror_name}" | grep -c "”") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "”")[[ $(echo "${tmp_mirror_name}" | grep -c "‘") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "‘")[[ $(echo "${tmp_mirror_name}" | grep -c "’") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "’")# 非一般字符长度tmp_mirror_name_length=$(StringLength "$(echo "${tmp_mirror_name// /}" | sed "s|[0-9a-zA-Z\.\=\:\_\(\)\'\"-\/\!·]||g;")")## 填充空格tmp_spaces_nums=$(($((default_mirror_name_length - tmp_mirror_name_length - $(StringLength "${tmp_mirror_name}"))) / 2))for ((j = 1; j <= ${tmp_spaces_nums}; j++)); dotmp_mirror_name="${tmp_mirror_name} "doneprintf " ❖ %-$((default_mirror_name_length + tmp_mirror_name_length))s %4s\n" "${tmp_mirror_name}" "$arr_num)"doneelsefor ((i = 0; i < ${#list_arr[@]}; i++)); dotmp_mirror_name=$(echo "${list_arr[i]}" | awk -F '@' '{print$1}') # 软件源名称tmp_mirror_url=$(echo "${list_arr[i]}" | awk -F '@' '{print$2}') # 软件源地址arr_num=$((i + 1))echo -e " ❖ $arr_num. ${tmp_mirror_url} | ${tmp_mirror_name}"donefi}## 选择软件源内网地址# 例如部分云计算厂商的镜像站区分外网（公网）地址和内网地址，内网地址仅面向云计算厂商云服务器用户使用# 内网地址一般不支持使用 HTTPS 协议，所以默认设置为 HTTP 协议function choose_intranet_address() {local intranet_sourcefor ((i = 0; i < ${#mirror_list_extranet[@]}; i++)); doif [[ "${SOURCE}" == "${mirror_list_extranet[i]}" ]]; then# echo "${SOURCE}"intranet_source="${mirror_list_intranet[i]}"# echo "${intranet_source}"# exitONLY_HTTP="True"breakelsecontinuefidoneif [[ -z "${USE_INTRANET_SOURCE}" ]]; thenlocal CHOICE
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE=$(echo -e "\n${BOLD}└─ 默认使用软件源的公网地址，是否继续? [Y/n] ${PLAIN}")
# read -rp "${CHOICE}" INPUTINPUT="Y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss]) ;;[Nn] | [Nn][Oo])SOURCE="${intranet_source}"echo -e "\n$WARN 已切换至内网专用地址，仅限在特定环境下使用！";;*)echo -e "\n$WARN 输入错误，默认不使用内网地址！";;esacelif [[ "${USE_INTRANET_SOURCE}" == "true" ]]; thenSOURCE="${intranet_source}"fi}function print_title() {local system_name="${SYSTEM_PRETTY_NAME:-"${SYSTEM_NAME} ${SYSTEM_VERSION_NUMBER}"}"local arch="${DEVICE_ARCH}"local date_time time_zonedate_time="$(date "+%Y-%m-%d %H:%M:%S")"time_zone="$(timedatectl status 2>/dev/null | grep "Time zone" | awk -F ':' '{print$2}' | awk -F ' ' '{print$1}')"echo -e ''echo -e " 运行环境 ${BLUE}${system_name} ${arch}${PLAIN}"echo -e " 系统时间 ${BLUE}${date_time} ${time_zone}${PLAIN}"}print_titleif [[ -z "${SOURCE}" ]]; then## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenreturnfiif [[ ${USE_ABROAD_SOURCE} = "true" ]]; thenlocal mirror_list_name="mirror_list_abroad"print_mirrors_list "${mirror_list_name}" 60elif [[ ${USE_EDU_SOURCE} = "true" ]]; thenlocal mirror_list_name="mirror_list_edu"print_mirrors_list "${mirror_list_name}" 31elselocal mirror_list_name="mirror_list_default"print_mirrors_list "${mirror_list_name}" 31filocal CHOICE
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE=$(echo -e "\n${BOLD}└─ 请选择并输入你想使用的软件源 [ 1-$(eval echo \${#$mirror_list_name[@]}) ]：${PLAIN}")while true; do
# read -rp "${CHOICE}" INPUTINPUT="1"case "${INPUT}" in[1-9] | [1-9][0-9] | [1-9][0-9][0-9])local tmp_sourcetmp_source="$(eval echo \${${mirror_list_name}[$((INPUT - 1))]})"if [[ -z "${tmp_source}" ]]; thenecho -e "\n$WARN 请输入有效的数字序号！"elseSOURCE="$(eval echo \${${mirror_list_name}[$((INPUT - 1))]} | awk -F '@' '{print$2}')"# echo "${SOURCE}"# exitbreakfi;;*)echo -e "\n$WARN 请输入数字序号以选择你想使用的软件源！";;esacdonefi## 选择软件源内网地址if [[ "${mirror_list_extranet[*]}" =~ (^|[^[:alpha:]])"${SOURCE}"([^[:alpha:]]|$) ]]; thenchoose_intranet_addressfi
}## 选择同步或更新软件源所使用的 WEB 协议（ HTTP/HTTPS）
function choose_protocol() {if [[ -z "${WEB_PROTOCOL}" ]]; thenif [[ "${ONLY_HTTP}" == "True" ]]; thenWEB_PROTOCOL="http"elselocal CHOICECHOICE=$(echo -e "\n${BOLD}└─ 软件源是否使用 HTTP 协议? [Y/n] ${PLAIN}")read -rp "${CHOICE}" INPUT[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss])WEB_PROTOCOL="http";;[Nn] | [Nn][Oo])WEB_PROTOCOL="https";;*)echo -e "\n$WARN 输入错误，默认使用 HTTPS 协议！"WEB_PROTOCOL="https";;esacfifiWEB_PROTOCOL="${WEB_PROTOCOL,,}"
}# 适用于部分红帽系统的 EPEL 附加软件包（安装/换源）
function choose_install_epel_packages() {function check_install_status() {## 判断是否已安装 EPEL 软件包rpm -qa | grep epel-release -qVERIFICATION_EPEL=$?## 判断 /etc/yum.repos.d 目录下是否存在 epel 附加软件包 repo 源文件[ -d $Dir_YumRepos ] && ls $Dir_YumRepos | grep epel -qVERIFICATION_EPELFILES=$?## 判断 /etc/yum.repos.d.bak 目录下是否存在 epel 附加软件包 repo 源文件[ -d $Dir_YumReposBackup ] && ls $Dir_YumReposBackup | grep epel -qVERIFICATION_EPELBACKUPFILES=$?}## 判断是否支持且需要处理 EPEL 附加软件包case "${SYSTEM_FACTIONS}" in"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_FEDORA}" ]] || [[ "${INSTALL_EPEL}" == "false" ]]; thenINSTALL_EPEL="false"returnelsecheck_install_statusfi;;*)INSTALL_EPEL="false"return;;esac## 选择是否安装 EPEL 附加软件包if [[ -z "${INSTALL_EPEL}" ]]; thenif [ $VERIFICATION_EPEL -eq 0 ]; thenlocal CHOICECHOICE=$(echo -e "\n${BOLD}└─ 检测到系统已安装 EPEL 附加软件包，是否替换/覆盖软件源? [Y/n] ${PLAIN}")elselocal CHOICE
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE=$(echo -e "\n${BOLD}└─ 是否安装 EPEL 附加软件包? [Y/n] ${PLAIN}")fi
# read -rp "${CHOICE}" INPUTINPUT="y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss])INSTALL_EPEL="true";;[Nn] | [Nn][Oo])INSTALL_EPEL="false";;*)echo -e "\n$WARN 输入错误，默认不更换！"INSTALL_EPEL="false";;esacfi
}## 关闭防火墙和SELinux
function close_firewall_service() {if [ ! -x /usr/bin/systemctl ]; thenreturnfiif [[ "$(systemctl is-active firewalld)" == "active" ]]; thenif [[ -z "${CLOSE_FIREWALL}" ]]; thenlocal CHOICE
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE=$(echo -e "\n${BOLD}└─ 是否关闭防火墙和 SELinux ? [Y/n] ${PLAIN}")
# read -rp "${CHOICE}" INPUTINPUT="Y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss])CLOSE_FIREWALL="true";;[Nn] | [Nn][Oo]) ;;*)echo -e "\n$WARN 输入错误，默认不关闭！";;esacfiif [[ "${CLOSE_FIREWALL}" == "true" ]]; thenlocal SelinuxConfig=/etc/selinux/configsystemctl disable --now firewalld >/dev/null 2>&1[ -s $SelinuxConfig ] && sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" $SelinuxConfig && setenforce 0 >/dev/null 2>&1fifi
}## 备份原有软件源（文件/目录）
function backup_original_mirrors() {function backup_file() {local target_file=$1local backup_file=$2local type="$3"## 判断是否存在源文件[ -f "${target_file}" ] || touch "${target_file}"if [ ! -s "${target_file}" ]; thenecho -e ''returnfi## 判断是否存在已备份的源文件if [ -s "${backup_file}" ]; thenif [[ "${IGNORE_BACKUP_TIPS}" != "false" ]]; thenreturnfilocal CHOICE_BACKUP
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE_BACKUP=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 ${type} 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}")
# read -rp "${CHOICE_BACKUP}" INPUTINPUT="y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss]) ;;[Nn] | [Nn][Oo])echo ''cp -rvf "${target_file}" "${backup_file}" 2>&1BACKED_UP="true";;*)echo -e "\n$WARN 输入错误，默认不覆盖！";;esacelseecho ''cp -rvf "${target_file}" "${backup_file}" 2>&1BACKED_UP="true"echo -e "\n$COMPLETE 已备份原有 ${type} 源文件"sleep 1sfi}function backup_dir() {local target_dir=$1local backup_dir=$2[ -d "${target_dir}" ] || mkdir -p "${target_dir}"[ -d "${backup_dir}" ] || mkdir -p "${backup_dir}"## 判断是否存在 repo 源文件ls "${target_dir}" | grep '\.repo$' -qif [ $? -ne 0 ]; thenreturnfi## 判断是否存在已备份的 repo 源文件ls "${backup_dir}" | grep '\.repo$' -qif [ $? -eq 0 ]; thenif [[ "${IGNORE_BACKUP_TIPS}" != "false" ]]; thenreturnfilocal CHOICE_BACKUP
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE_BACKUP=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}")
# read -rp "${CHOICE_BACKUP}" INPUTINPUT="y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss]) ;;[Nn] | [Nn][Oo])echo ''cp -rvf $target_dir/* "${backup_dir}" 2>&1BACKED_UP="true";;*)echo -e "\n$WARN 输入错误，默认不覆盖！";;esacelseecho ''cp -rvf $target_dir/* "${backup_dir}" 2>&1BACKED_UP="true"echo -e "\n$COMPLETE 已备份原有 repo 源文件"sleep 1sfi}BACKED_UP="false" # 是否已备份if [[ "${BACKUP}" == "true" ]]; thencase "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")if [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_LINUX_MINT}" ]]; then# /etc/apt/sources.listbackup_file $File_DebianSourceList $File_DebianSourceListBackup "sources.list"fi## 自新版本的 Debian 与 Ubuntu 起，软件源文件格式统一为 DEB822 格式，涉及 Debian 12 的容器镜像、Ubuntu 24.04 和未来尚未发布的版本# Debian DEB822 格式源文件if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_DEBIAN}" ]]; then[ -f $File_DebianSources ] && backup_file $File_DebianSources $File_DebianSourcesBackup "debian.sources"fi# Ubuntu DEB822 格式源文件if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_UBUNTU}" ]]; then[ -f $File_UbuntuSources ] && backup_file $File_UbuntuSources $File_UbuntuSourcesBackup "ubuntu.sources"fi# Armbianif [ -f $File_ArmbianRelease ]; thenbackup_file $File_ArmbianSourceList $File_ArmbianSourceListBackup "armbian.list"fi# Proxmoxif [ -f $File_ProxmoxVersion ]; thenbackup_file $File_ProxmoxSourceList $File_ProxmoxSourceListBackup "pve-no-subscription.list"fi# Linux Mintif [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_LINUX_MINT}" ]]; thenbackup_file $File_LinuxMintSourceList $File_LinuxMintSourceListBackup "official-package-repositories.list"fi;;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")# /etc/yum.repos.dbackup_dir $Dir_YumRepos $Dir_YumReposBackup;;"${SYSTEM_OPENSUSE}")# /etc/zypp/repos.dbackup_dir $Dir_openSUSERepos $Dir_openSUSEReposBackup;;"${SYSTEM_ARCH}")# /etc/pacman.d/mirrorlistbackup_file $File_ArchLinuxMirrorList $File_ArchLinuxMirrorListBackup "mirrorlist";;"${SYSTEM_ALPINE}")# /etc/apk/repositoriesbackup_file $File_AlpineRepositories $File_AlpineRepositoriesBackup "repositories";;"${SYSTEM_GENTOO}")# /etc/portage/make.confbackup_file $File_GentooMakeConf $File_GentooMakeConfBackup "make.conf"# /etc/portage/repos.conf/gentoo.conf[ -d "${Dir_GentooReposConf}" ] || mkdir -p "${Dir_GentooReposConf}"backup_file $File_GentooReposConf $File_GentooReposConfBackup "gentoo.conf";;esacfi
}## 移除原有软件源
function remove_original_mirrors() {case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")if [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_LINUX_MINT}" ]]; then[ -f $File_DebianSourceList ] && sed -i '1,$d' $File_DebianSourceListfi[ -d $Dir_DebianExtendSource ] || mkdir -p $Dir_DebianExtendSource## 自新版本的 Debian 与 Ubuntu 起，软件源文件格式统一为 DEB822 格式，涉及 Debian 12 的容器镜像、Ubuntu 24.04 和未来尚未发布的版本# Debian DEB822 格式源文件if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_DEBIAN}" ]]; then[ -f $File_DebianSources ] && rm -rf $File_DebianSourcesfi# Ubuntu DEB822 格式源文件if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_UBUNTU}" ]]; then[ -f $File_UbuntuSources ] && rm -rf $File_UbuntuSourcesfi# Armbianif [ -f $File_ArmbianRelease ]; then[ -f $File_ArmbianSourceList ] && sed -i '1,$d' $File_ArmbianSourceListfi# Proxmoxif [ -f $File_ProxmoxVersion ]; then[ -f $File_ProxmoxSourceList ] && sed -i '1,$d' $File_ProxmoxSourceListfi# Linux Mintif [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_LINUX_MINT}" ]]; then[ -f $File_LinuxMintSourceList ] && sed -i '1,$d' $File_LinuxMintSourceListfi;;"${SYSTEM_REDHAT}")if [ ! -d $Dir_YumRepos ]; thenmkdir -p $Dir_YumReposreturnfiif [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_FEDORA}" ]]; then# Fedora 有额外源文件，且随版本变化for repo_file in fedora.repo fedora-updates.repo fedora-updates-testing.repo fedora-modular.repo fedora-updates-modular.repo fedora-updates-testing-modular.repo; dorm -rf $Dir_YumRepos/$repo_filedoneelseif [[ "${ONLY_EPEL}" != "false" ]]; thenreturnficase "${SYSTEM_JUDGMENT}" in"${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)rm -rf $Dir_YumRepos/rocky* # 注：本脚本旧版遗留问题rm -rf $Dir_YumRepos/centos.repo $Dir_YumRepos/centos-addons.repo;;*)if [ -f $Dir_YumRepos/epel.repo ]; thenls $Dir_YumRepos/ | grep -Ev epel | xargs rm -rfelserm -rf $Dir_YumRepos/*fi;;esac;;"${SYSTEM_CENTOS}")if [ -f $Dir_YumRepos/epel.repo ]; thenls $Dir_YumRepos/ | grep -Ev epel | xargs rm -rfelserm -rf $Dir_YumRepos/*fi;;"${SYSTEM_CENTOS_STREAM}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)rm -rf $Dir_YumRepos/centos.repo $Dir_YumRepos/centos-addons.repo;;8)rm -rf $Dir_YumRepos/CentOS-Stream-*;;esac;;"${SYSTEM_ROCKY}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)rm -rf $Dir_YumRepos/rocky*;;8)rm -rf $Dir_YumRepos/Rocky-*;;esac;;"${SYSTEM_ALMALINUX}")rm -rf $Dir_YumRepos/almalinux*;;"${SYSTEM_OPENCLOUDOS}")rm -rf $Dir_YumRepos/OpenCloudOS*;;esacfi;;"${SYSTEM_OPENCLOUDOS}")[ -d $Dir_YumRepos ] && rm -rf $Dir_YumRepos/OpenCloudOS*;;"${SYSTEM_OPENEULER}")[ -d $Dir_YumRepos ] && rm -rf $Dir_YumRepos/openEuler.repo;;"${SYSTEM_OPENSUSE}")[ -d $Dir_openSUSERepos ] && ls $Dir_openSUSERepos/ | grep -E "^repo-" | grep -Ev "openh264" | xargs rm -rf;;"${SYSTEM_ARCH}")[ -f $File_ArchLinuxMirrorList ] && sed -i '1,$d' $File_ArchLinuxMirrorList;;"${SYSTEM_ALPINE}")[ -f $File_AlpineRepositories ] && sed -i '1,$d' $File_AlpineRepositories;;"${SYSTEM_GENTOO}")[ -f $File_GentooReposConf ] && sed -i '1,$d' $File_GentooReposConf;;esac
}## 换源
function change_mirrors_main() {## 打印修改前后差异function print_diff() {## 单一文件比较模式function diff_file() {local diff_file=$1local origin_file=$2if [[ -s $diff_file ]] && [[ -s $origin_file ]]; thenif [[ "$(cat "${diff_file}")" != "$(cat "${origin_file}")" ]]; thenecho -e "\n${BLUE}${diff_file}${PLAIN} -> ${BLUE}${origin_file}${PLAIN}"diff "${diff_file}" "${origin_file}" -d --color=always -I -B -Efifi}## 目录文件比较模式function diff_dir() {local diff_dir=$1local origin_dir=$2for item in $(ls $diff_dir | xargs); dodiff_file "${diff_dir}/${item}" "${origin_dir}/${item}"done}if [[ -x /usr/bin/diff && "${BACKED_UP}" == "true" ]]; thencase "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")if [[ "${SYSTEM_JUDGMENT}" != "${SYSTEM_LINUX_MINT}" ]]; thendiff_file $File_DebianSourceListBackup $File_DebianSourceListfi# Armbianif [ -f $File_ArmbianRelease ]; thendiff_file $File_ArmbianSourceListBackup $File_ArmbianSourceListfi# Proxmoxif [ -f $File_ProxmoxVersion ]; thendiff_file $File_ProxmoxSourceListBackup $File_ProxmoxSourceListfi# Linux Mintif [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_LINUX_MINT}" ]]; thendiff_file $File_LinuxMintSourceListBackup $File_LinuxMintSourceListfi;;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")diff_dir $Dir_YumReposBackup $Dir_YumRepos;;"${SYSTEM_OPENSUSE}")diff_dir $Dir_openSUSEReposBackup $Dir_openSUSERepos;;"${SYSTEM_ARCH}")diff_file $File_ArchLinuxMirrorListBackup $File_ArchLinuxMirrorList;;"${SYSTEM_ALPINE}")diff_file $File_AlpineRepositoriesBackup $File_AlpineRepositories;;"${SYSTEM_GENTOO}")diff_file $File_GentooMakeConfBackup $File_GentooMakeConfdiff_file $File_GentooReposConfBackup $File_GentooReposConf;;esacfi}## 调用换源函数case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")change_mirrors_Debian;;"${SYSTEM_REDHAT}")change_mirrors_RedHat;;"${SYSTEM_OPENCLOUDOS}")change_mirrors_OpenCloudOS;;"${SYSTEM_OPENEULER}")change_mirrors_openEuler;;"${SYSTEM_OPENSUSE}")change_mirrors_openSUSE;;"${SYSTEM_ARCH}")change_mirrors_ArchLinux;;"${SYSTEM_ALPINE}")change_mirrors_Alpine;;"${SYSTEM_GENTOO}")change_mirrors_Gentoo;;esac## 比较差异if [[ "${PRINT_DIFF}" == "true" ]]; thenprint_difffi## 更新软件源echo -e "\n$WORKING 开始${SYNC_MIRROR_TEXT}...\n"case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")apt-get update;;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")local package_manager="yum"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_CENTOS_STREAM}" | "${SYSTEM_ROCKY}" | "${SYSTEM_ALMALINUX}" | "${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)package_manager="dnf";;esac;;"${SYSTEM_FEDORA}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")package_manager="dnf";;esac$package_manager makecache;;"${SYSTEM_OPENSUSE}")zypper ref;;"${SYSTEM_ARCH}")pacman -Sy;;"${SYSTEM_ALPINE}")apk update -f;;"${SYSTEM_GENTOO}")emerge --sync --quiet;;esacif [ $? -eq 0 ]; thenecho -e "\n$SUCCESS 软件源更换完毕"elseecho -e "\n$FAIL 软件源更换完毕，但${SYNC_MIRROR_TEXT}失败\n"echo -e "请再次执行脚本并更换相同软件源后进行尝试，若仍然${SYNC_MIRROR_TEXT}失败那么可能由以下原因导致"echo -e "1. 网络问题：例如连接异常、由地区影响的网络间歇式中断等"echo -e "2. 软件源问题：建议更换其它镜像站进行尝试，少数情况下软件源若处于同步中状态则可能会出现文件同步错误问题"echo -e "\n软件源地址：${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}\n"exit 1fi
}## 升级软件包
function upgrade_software() {function clean_cache() {## 交互确认if [[ -z "${CLEAN_CACHE}" ]]; thenCLEAN_CACHE="false"local CHOICECHOICE=$(echo -e "\n${BOLD}└─ 是否清理已下载的软件包缓存? [Y/n] ${PLAIN}")read -rp "${CHOICE}" INPUT[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss])CLEAN_CACHE="true";;[Nn] | [Nn][Oo]) ;;*)echo -e "\n$WARN 输入错误，默认不清理！";;esacfiif [[ "${CLEAN_CACHE}" == "false" ]]; thenreturnfi## 调用系统命令case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")apt-get autoremove -y >/dev/null 2>&1apt-get clean >/dev/null 2>&1;;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")local package_manager="yum"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_CENTOS_STREAM}" | "${SYSTEM_ROCKY}" | "${SYSTEM_ALMALINUX}" | "${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)package_manager="dnf";;esac;;"${SYSTEM_FEDORA}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")package_manager="dnf";;esac$package_manager autoremove -y >/dev/null 2>&1$package_manager clean packages -y >/dev/null 2>&1;;"${SYSTEM_OPENSUSE}")rm -rf /var/cache/zypp/* >/dev/null 2>&1;;"${SYSTEM_ALPINE}")rm -rf /var/cache/apk/* >/dev/null 2>&1;;"${SYSTEM_GENTOO}")eclean-dist --deep >/dev/null 2>&1eclean-packages --deep >/dev/null 2>&1;;esacecho -e "\n$COMPLETE 清理完毕"}## 跳过特殊系统case "${SYSTEM_JUDGMENT}" in"${SYSTEM_ARCH}")return;;esac## 交互确认if [[ -z "${UPGRADE_SOFTWARE}" ]]; thenUPGRADE_SOFTWARE="false"local CHOICE
#----------------------------------------------------------------reverse 2024-8-20 zhpCHOICE=$(echo -e "\n${BOLD}└─ 是否跳过更新软件包? [Y/n] ${PLAIN}")
# read -rp "${CHOICE}" INPUTINPUT="y"[[ -z "${INPUT}" ]] && INPUT=Ycase "${INPUT}" in[Yy] | [Yy][Ee][Ss]) ;;[Nn] | [Nn][Oo])UPGRADE_SOFTWARE="true";;*)echo -e "\n$WARN 输入错误，默认不更新！";;esacfiif [[ "${UPGRADE_SOFTWARE}" == "false" ]]; thenreturnfiecho -e ''## 调用系统命令case "${SYSTEM_FACTIONS}" in"${SYSTEM_DEBIAN}")apt-get upgrade -y;;"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")local package_manager="yum"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_CENTOS_STREAM}" | "${SYSTEM_ROCKY}" | "${SYSTEM_ALMALINUX}" | "${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)package_manager="dnf";;esac;;"${SYSTEM_FEDORA}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")package_manager="dnf";;esac$package_manager update -y --skip-broken;;"${SYSTEM_OPENSUSE}")zypper update -y;;"${SYSTEM_ALPINE}")apk upgrade --no-cache;;"${SYSTEM_GENTOO}")emerge --update --deep --with-bdeps=y --ask=n @world;;esac## 清理缓存clean_cache
}################################################################################ 更换基于 Debian 系 Linux 发行版的软件源
function change_mirrors_Debian() {function gen_debian_source() {echo "deb ${1} ${2} ${3}
# deb-src ${1} ${2} ${3}
deb ${1} ${2}-updates ${3}
# deb-src ${1} ${2}-updates ${3}
deb ${1} ${2}-backports ${3}
# deb-src ${1} ${2}-backports ${3}"}function gen_debian_security_source() {echo "deb ${1} ${2}-security ${3}
# deb-src ${1} ${2}-security ${3}"}function gen_ubuntu_source() {echo "deb ${1} ${2} ${3}
# deb-src ${1} ${2} ${3}
deb ${1} ${2}-updates ${3}
# deb-src ${1} ${2}-updates ${3}
deb ${1} ${2}-backports ${3}
# deb-src ${1} ${2}-backports ${3}
deb ${1} ${2}-security ${3}
# deb-src ${1} ${2}-security ${3}## 预发布软件源（不建议启用）
# deb ${1} ${2}-proposed ${3}
# deb-src ${1} ${2}-proposed ${3}"}## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thencase "${SYSTEM_JUDGMENT}" in"${SYSTEM_DEBIAN}")SOURCE="deb.debian.org";;"${SYSTEM_UBUNTU}")SOURCE="archive.ubuntu.com";;"${SYSTEM_KALI}")SOURCE="http.kali.org";;"${SYSTEM_DEEPIN}")SOURCE="community-packages.deepin.com";;"${SYSTEM_LINUX_MINT}")SOURCE="packages.linuxmint.com";;esacfilocal repository_sections # 仓库区域local tips="## 默认禁用源码镜像以提高速度，如需启用请自行取消注释"local base_url="${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_DEBIAN}")case "${SYSTEM_VERSION_NUMBER}" in8 | 9 | 10 | 11)repository_sections="main contrib non-free";;*)repository_sections="main contrib non-free non-free-firmware";;esacif [[ "${SYSTEM_VERSION_CODENAME}" != "sid" ]]; thenecho "${tips}
$(gen_debian_source "${base_url}" "${SYSTEM_VERSION_CODENAME}" "${repository_sections}")" >>$File_DebianSourceList# 处理 debian-security 仓库源base_url="${WEB_PROTOCOL}://${SOURCE_SECURITY:-"${SOURCE}"}/${SOURCE_SECURITY_BRANCH:-"${SOURCE_BRANCH}-security"}"echo "$(gen_debian_security_source "${base_url}" "${SYSTEM_VERSION_CODENAME}" "${repository_sections}")" >>$File_DebianSourceListelseecho "deb ${base_url} ${SYSTEM_VERSION_CODENAME} ${repository_sections}
# deb-src ${base_url} ${SYSTEM_VERSION_CODENAME} ${repository_sections}" >>$File_DebianSourceListfi;;"${SYSTEM_UBUNTU}")repository_sections="main restricted universe multiverse"echo "${tips}
$(gen_ubuntu_source "${base_url}" "${SYSTEM_VERSION_CODENAME}" "${repository_sections}")" >>$File_DebianSourceList;;"${SYSTEM_KALI}")repository_sections="main contrib non-free non-free-firmware"echo "${tips}
deb ${base_url} ${SYSTEM_VERSION_CODENAME} ${repository_sections}
# deb-src ${base_url} ${SYSTEM_VERSION_CODENAME} ${repository_sections}" >>$File_DebianSourceList;;"${SYSTEM_DEEPIN}")repository_sections="apricot main contrib non-free"echo "${tips}
deb ${base_url} ${repository_sections}
# deb-src ${base_url} ${repository_sections}" >>$File_DebianSourceList;;"${SYSTEM_LINUX_MINT}")## 专用源repository_sections="main upstream import backport"echo "${tips}
deb ${base_url} ${SYSTEM_VERSION_CODENAME} ${repository_sections}
" >>$File_LinuxMintSourceList## 底层系统软件源local base_system_source_branch base_system_codenameif [[ "${SYSTEM_VERSION_NUMBER}" == 6 ]]; then# Debian 版（LMDE）base_system_source_branch="debian"base_system_codename="bookworm"repository_sections="main contrib non-free non-free-firmware"base_url="${WEB_PROTOCOL}://${SOURCE}/${base_system_source_branch}"echo "$(gen_debian_source "${base_url}" "${base_system_codename}" "${repository_sections}")" >>$File_LinuxMintSourceList# 处理 debian-security 仓库源base_url="${WEB_PROTOCOL}://${SOURCE_SECURITY:-"${SOURCE}"}/${SOURCE_SECURITY_BRANCH:-"${base_system_source_branch}-security"}"echo "$(gen_debian_security_source "${base_url}" "${base_system_codename}" "${repository_sections}")" >>$File_LinuxMintSourceListelse# Ubuntu 版if [[ "${DEVICE_ARCH}" == "x86_64" ]] || [[ "${DEVICE_ARCH}" == *i?86* ]]; thenbase_system_source_branch="ubuntu"elsebase_system_source_branch="ubuntu-ports"ficase "${SYSTEM_VERSION_NUMBER:0:2}" in21)base_system_codename="jammy";;20)base_system_codename="focal";;19)base_system_codename="bionic";;esacrepository_sections="main restricted universe multiverse"base_url="${WEB_PROTOCOL}://${SOURCE}/${base_system_source_branch}"echo "$(gen_ubuntu_source "${base_url}" "${base_system_codename}" "${repository_sections}")" >>$File_LinuxMintSourceListfi;;esac## 处理其它衍生操作系统的专用源# Armbianif [ -f $File_ArmbianRelease ]; thenecho "deb [signed-by=/usr/share/keyrings/armbian.gpg] ${WEB_PROTOCOL}://${SOURCE}/armbian ${SYSTEM_VERSION_CODENAME} main ${SYSTEM_VERSION_CODENAME}-utils ${SYSTEM_VERSION_CODENAME}-desktop" >>$File_ArmbianSourceListfi# Proxmoxif [ -f $File_ProxmoxVersion ]; thenecho "deb ${WEB_PROTOCOL}://${SOURCE}/proxmox/debian/pve ${SYSTEM_VERSION_CODENAME} pve-no-subscription
# deb ${WEB_PROTOCOL}://${SOURCE}/proxmox/debian/pbs ${SYSTEM_VERSION_CODENAME} pbs-no-subscription
# deb ${WEB_PROTOCOL}://${SOURCE}/proxmox/debian/pbs-client ${SYSTEM_VERSION_CODENAME} pbs-client-no-subscription
# deb ${WEB_PROTOCOL}://${SOURCE}/proxmox/debian/pmg ${SYSTEM_VERSION_CODENAME} pmg-no-subscription" >>$File_ProxmoxSourceListfi
}## 更换基于 RedHat 系 Linux 发行版的软件源
function change_mirrors_RedHat() {## 仅 EPEL 模式if [[ "${ONLY_EPEL}" == "true" ]]; thenchange_mirrors_or_install_EPEL # EPEL 附加软件包returnfi## 生成官方 repo 源文件case "${SYSTEM_JUDGMENT}" in"${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)gen_repo_files_CentOSStream "${SYSTEM_VERSION_NUMBER:0:1}";;*)gen_repo_files_CentOS "${SYSTEM_VERSION_NUMBER:0:1}";;esac;;"${SYSTEM_CENTOS}")gen_repo_files_CentOS "${SYSTEM_VERSION_NUMBER:0:1}";;"${SYSTEM_CENTOS_STREAM}")gen_repo_files_CentOSStream "${SYSTEM_VERSION_NUMBER:0:1}";;"${SYSTEM_ROCKY}")gen_repo_files_RockyLinux "${SYSTEM_VERSION_NUMBER:0:1}";;"${SYSTEM_ALMALINUX}")gen_repo_files_AlmaLinux "${SYSTEM_VERSION_NUMBER:0:1}";;"${SYSTEM_FEDORA}")gen_repo_files_Fedora "${SYSTEM_VERSION_NUMBER}";;"${SYSTEM_OPENCLOUDOS}")gen_repo_files_OpenCloudOS "${SYSTEM_VERSION_NUMBER:0:1}";;esac## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenchange_mirrors_or_install_EPEL # EPEL 附加软件包returnfi## 修改源cd $Dir_YumReposcase "${SYSTEM_JUDGMENT}" in"${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)sed -e "s|^#baseurl=https|baseurl=${WEB_PROTOCOL}|g" \-e "s|^metalink=|#metalink=|g" \-e "s|mirror.stream.centos.org|${SOURCE}/${SOURCE_BRANCH}|g" \-i \centos.repo \centos-addons.repo# 禁用 GPG 签名检查sed -e "s|gpgcheck=1|gpgcheck=0|g" \-i \centos.repo \centos-addons.repo;;*)sed -i "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" CentOS-*sed -i 's|^mirrorlist=|#mirrorlist=|g' CentOS-*case ${SYSTEM_VERSION_NUMBER:0:1} in8)sed -i "s|mirror.centos.org/\$contentdir|mirror.centos.org/centos-vault|g" CentOS-*sed -i "s/\$releasever/8.5.2111/g" CentOS-*# 单独处理 CentOS-Linux-Sources.reposed -i "s|vault.centos.org/\$contentdir|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"centos-vault"}|g" CentOS-Linux-Sources.repo;;7)sed -i "s|mirror.centos.org/\$contentdir|mirror.centos.org/${SOURCE_BRANCH}|g" CentOS-*sed -i "s/\$releasever/7/g" CentOS-*# 单独处理 CentOS-Sources.reposed -i "s|vault.centos.org/centos|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"${SOURCE_BRANCH}"}|g" CentOS-Sources.repo;;esacsed -i "s|mirror.centos.org|${SOURCE}|g" CentOS-*;;esac;;"${SYSTEM_CENTOS}")sed -i "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" CentOS-*sed -i 's|^mirrorlist=|#mirrorlist=|g' CentOS-*## CentOS 7/8 操作系统版本结束了生命周期（EOL），Linux 社区已不再维护该操作系统版本case ${SYSTEM_VERSION_NUMBER:0:1} in8)# 最终版本为 8.5.2011，从 2022-02 开始切换至 centos-vault 分支sed -i "s|mirror.centos.org/\$contentdir|mirror.centos.org/${SOURCE_BRANCH:-"centos-vault"}|g" CentOS-*sed -i "s/\$releasever/8.5.2111/g" CentOS-*sed -i "s|vault.centos.org/\$contentdir|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"centos-vault"}|g" CentOS-Linux-Sources.repo # 单独处理 CentOS-Linux-Sources.repo;;7)# 最终版本为 7.9.2009，从 2024-07 开始切换至 centos-vault 分支sed -i "s|mirror.centos.org/centos|mirror.centos.org/${SOURCE_BRANCH:-"centos-vault"}|g" CentOS-*sed -i "s/\$releasever/7.9.2009/g" CentOS-*sed -i "s|vault.centos.org/centos|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"centos-vault"}|g" CentOS-Sources.repo # 单独处理 CentOS-Sources.repo;;esacsed -i "s|mirror.centos.org|${SOURCE}|g" CentOS-*;;"${SYSTEM_CENTOS_STREAM}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)sed -e "s|^#baseurl=https|baseurl=${WEB_PROTOCOL}|g" \-e "s|^metalink=|#metalink=|g" \-e "s|mirror.stream.centos.org|${SOURCE}/${SOURCE_BRANCH}|g" \-i \centos.repo \centos-addons.repo;;8)sed -i "s|vault.centos.org/\$contentdir|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"${SOURCE_BRANCH}"}|g" CentOS-Stream-Sources.repo # 单独处理 CentOS-Stream-Sources.reposed -e "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|^mirrorlist=|#mirrorlist=|g" \-e "s|mirror.centos.org/\$contentdir|${SOURCE}/${SOURCE_BRANCH}|g" \-i \CentOS-Stream-*;;esac;;"${SYSTEM_ROCKY}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)sed -e "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|^mirrorlist=|#mirrorlist=|g" \-e "s|dl.rockylinux.org/\$contentdir|${SOURCE}/${SOURCE_BRANCH}|g" \-i \rocky.repo \rocky-addons.repo \rocky-devel.repo \rocky-extras.repo;;8)sed -e "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|^mirrorlist=|#mirrorlist=|g" \-e "s|dl.rockylinux.org/\$contentdir|${SOURCE}/${SOURCE_BRANCH}|g" \-i \Rocky-*;;esac;;"${SYSTEM_ALMALINUX}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)sed -e "s|^# baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|^mirrorlist=|#mirrorlist=|g" \-e "s|repo.almalinux.org/vault|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"almalinux-vault"}|g" \-e "s|repo.almalinux.org/almalinux|${SOURCE}/${SOURCE_BRANCH}|g" \-i \almalinux-*;;8)sed -e "s|^mirrorlist=|#mirrorlist=|g" \-e "s|^# baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|repo.almalinux.org/vault|${SOURCE_VAULT:-"${SOURCE}"}/${SOURCE_VAULT_BRANCH:-"almalinux-vault"}|g" \-e "s|repo.almalinux.org/almalinux|${SOURCE}/${SOURCE_BRANCH}|g" \-i \almalinux-ha.repo \almalinux-nfv.repo \almalinux-plus.repo \almalinux-powertools.repo \almalinux-resilientstorage.repo \almalinux-rt.repo \almalinux-sap.repo \almalinux-saphana.repo \almalinux.repo;;esac;;"${SYSTEM_FEDORA}")# 自 Fedora 39 起不再使用 modular 仓库local fedora_repo_filesif [[ "${SYSTEM_VERSION_NUMBER}" -lt 39 ]]; thenfedora_repo_files="fedora.repo fedora-updates.repo fedora-updates-testing.repo fedora-modular.repo fedora-updates-modular.repo fedora-updates-testing-modular.repo"elsefedora_repo_files="fedora.repo fedora-updates.repo fedora-updates-testing.repo"fised -e "s|^metalink=|#metalink=|g" \-e "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|download.example/pub/fedora/linux|${SOURCE}/${SOURCE_BRANCH}|g" \-i \$fedora_repo_files;;"${SYSTEM_OPENCLOUDOS}")case ${SYSTEM_VERSION_NUMBER:0:1} in8)sed -e "s|^baseurl=https|baseurl=${WEB_PROTOCOL}|g" \-e "s|mirrors.opencloudos.tech/opencloudos|${SOURCE}/${SOURCE_BRANCH}|g" \-i \OpenCloudOS-Debuginfo.repo \OpenCloudOS.repo \OpenCloudOS-Sources.repo;;esac;;esacchange_mirrors_or_install_EPEL # EPEL 附加软件包
}## 更换 OpenCloudOS 发行版软件源
function change_mirrors_OpenCloudOS() {## 生成官方 repo 源文件gen_repo_files_OpenCloudOS "${SYSTEM_VERSION_NUMBER:0:1}"## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenchange_mirrors_or_install_EPEL # EPEL 附加软件包returnfi## 修改源cd $Dir_YumReposcase ${SYSTEM_VERSION_NUMBER:0:1} in9)sed -e "s|^baseurl=https|baseurl=${WEB_PROTOCOL}|g" \-e "s|mirrors.opencloudos.tech/opencloudos|${SOURCE}/${SOURCE_BRANCH}|g" \-i \OpenCloudOS.repo;;esacchange_mirrors_or_install_EPEL # EPEL 附加软件包
}## 更换 openEuler 发行版软件源
function change_mirrors_openEuler() {## 生成官方 repo 源文件gen_repo_files_openEuler## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenchange_mirrors_or_install_EPEL # EPEL 附加软件包returnfi## 修改源cd $Dir_YumReposlocal version_name="$(cat $File_LinuxRelease | grep -E "^VERSION=" | awk -F '=' '{print$2}' | sed "s/[\'\"]//g; s/[()]/ /g; s/ / /g; s/^ //g; s/ $//g; s/ /-/g; s/_/-/g")"sed -e "s|^baseurl=http|baseurl=${WEB_PROTOCOL}|g" \-e "s|repo.openeuler.org|${SOURCE}/${SOURCE_BRANCH}|g" \-e "s|openEuler-version|openEuler-${version_name}|g" \-i \openEuler.repochange_mirrors_or_install_EPEL # EPEL 附加软件包
}## 更换 openSUSE 发行版软件源
function change_mirrors_openSUSE() {## 生成官方 repo 源文件case "${SYSTEM_ID}" in"opensuse-leap")gen_repo_files_openSUSE "leap" "${SYSTEM_VERSION_NUMBER}";;"opensuse-tumbleweed")gen_repo_files_openSUSE "tumbleweed";;esac## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenreturnfi## 修改源cd $Dir_openSUSERepos# 更换软件源sed -i "s|^#baseurl=http|baseurl=${WEB_PROTOCOL}|g" repo-*case "${SYSTEM_ID}" inopensuse-leap)case "${SYSTEM_VERSION_NUMBER}" in15.[0-2])sed -i "s|download.opensuse.org|${SOURCE}/${SOURCE_BRANCH}|g" \repo-debug-non-oss.repo \repo-debug.repo \repo-debug-update-non-oss.repo \repo-debug-update.repo \repo-non-oss.repo \repo-oss.repo \repo-source-non-oss.repo \repo-source.repo \repo-update-non-oss.repo \repo-update.repo;;*)sed -i "s|download.opensuse.org|${SOURCE}/${SOURCE_BRANCH}|g" \repo-backports-debug-update.repo \repo-backports-update.repo \repo-debug-non-oss.repo \repo-debug.repo \repo-debug-update-non-oss.repo \repo-debug-update.repo \repo-non-oss.repo \repo-oss.repo \repo-sle-debug-update.repo \repo-sle-update.repo \repo-source.repo \repo-update-non-oss.repo \repo-update.repo;;esac;;opensuse-tumbleweed)sed -i "s|download.opensuse.org|${SOURCE}/${SOURCE_BRANCH}|g" \repo-debug.repo \repo-non-oss.repo \repo-openh264.repo \repo-oss.repo \repo-source.repo \repo-update.repo;;esac
}## 更换 Arch Linux 发行版软件源
function change_mirrors_ArchLinux() {## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenSOURCE="mirrors.aliyun.com"echo -e "\n${TIP} 由于 Arch Linux 无官方源因此已切换至阿里源\n"fi## 修改源case "${SOURCE_BRANCH}" in"archlinuxarm")echo "Server = ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}/\$arch/\$repo" >>$File_ArchLinuxMirrorList;;"archlinuxcn")echo "Server = ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}/\$arch" >>$File_ArchLinuxMirrorList;;*)echo "Server = ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}/\$repo/os/\$arch" >>$File_ArchLinuxMirrorList;;esac
}## 更换 Alpine Linux 发行版软件源
function change_mirrors_Alpine() {## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenSOURCE="dl-cdn.alpinelinux.org"filocal version_nameecho "${SYSTEM_PRETTY_NAME}" | grep " edge" -qif [ $? -eq 0 ]; thenversion_name="edge"elseversion_name="v${SYSTEM_VERSION_NUMBER%.*}"fi## 修改源echo "${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}/${version_name}/main
${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}/${version_name}/community" >>$File_AlpineRepositories
}## 更换 Gentoo 发行版软件源
function change_mirrors_Gentoo() {## 使用官方源if [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thengrep -Eq "^GENTOO_MIRRORS=" $File_GentooMakeConfif [ $? -eq 0 ]; thensed -i "/^GENTOO_MIRRORS=/d" $File_GentooMakeConffi[ -f $File_GentooReposConf ] && rm -rf $File_GentooReposConfreturnfi## 修改源grep -Eq "^GENTOO_MIRRORS=" $File_GentooMakeConfif [ $? -eq 0 ]; thensed -i "s|^GENTOO_MIRRORS=.*|GENTOO_MIRRORS=\"${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}\"|g" $File_GentooMakeConfelseecho -e "\nGENTOO_MIRRORS=\"${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}\"" >>$File_GentooMakeConffiecho "[DEFAULT]
main-repo = gentoo[gentoo]
location = /usr/portage
sync-type = rsync
sync-uri = rsync://${SOURCE_PORTAGE:-"${SOURCE}"}/${SOURCE_PORTAGE_BRANCH:-"gentoo-portage"}
auto-sync = yes" >$File_GentooReposConf
}## EPEL (Extra Packages for Enterprise Linux) 附加软件包 - 安装或更换软件源
function change_mirrors_or_install_EPEL() {if [[ "${INSTALL_EPEL}" != "true" ]]; thenreturnfi## 确定安装版本（不支持安装的系统直接跳出）local target_versioncase "${SYSTEM_FACTIONS}" in"${SYSTEM_REDHAT}" | "${SYSTEM_OPENCLOUDOS}")if [[ "${SYSTEM_JUDGMENT}" == "${SYSTEM_FEDORA}" ]]; thenreturnelsetarget_version="${SYSTEM_VERSION_NUMBER:0:1}"fi;;"${SYSTEM_OPENEULER}")target_version="9";;*)return;;esac## 安装 EPEL 软件包if [ "${VERIFICATION_EPEL}" -ne 0 ]; thenecho -e "\n${WORKING} 安装 epel-release 软件包...\n"local package_manager="yum"case "${SYSTEM_JUDGMENT}" in"${SYSTEM_CENTOS_STREAM}" | "${SYSTEM_ROCKY}" | "${SYSTEM_ALMALINUX}" | "${SYSTEM_RHEL}")case ${SYSTEM_VERSION_NUMBER:0:1} in9)package_manager="dnf";;esac;;"${SYSTEM_FEDORA}" | "${SYSTEM_OPENCLOUDOS}" | "${SYSTEM_OPENEULER}")package_manager="dnf";;esac$package_manager install -y https://mirrors.cloud.tencent.com/epel/epel-release-latest-${target_version}.noarch.rpmrm -rf $Dir_YumRepos/epel*fi## 删除原有 repo 源文件[ "${VERIFICATION_EPELFILES}" -eq 0 ] && rm -rf $Dir_YumRepos/epel*[ "${VERIFICATION_EPELBACKUPFILES}" -eq 0 ] && rm -rf $Dir_YumReposBackup/epel*## 生成 repo 源文件gen_repo_files_EPELif [[ "${USE_OFFICIAL_SOURCE}" == "true" ]]; thenreturnfi## 修改源sed -e "s|^#baseurl=http\(s\)\?|baseurl=${WEB_PROTOCOL}|g" \-e "s|^metalink=|#metalink=|g" \-e "s|download.example/pub/epel|${SOURCE_EPEL:-"${SOURCE}"}/${SOURCE_EPEL_BRANCH:-"epel"}|g" \-e "s|download.fedoraproject.org/pub/epel|${SOURCE_EPEL:-"${SOURCE}"}/${SOURCE_EPEL_BRANCH:-"epel"}|g" \-i \$Dir_YumRepos/epel*
}################################################################################ 生成 CentOS 官方 repo 源文件
function gen_repo_files_CentOS() {case "$1" in8)cat <<'EOF' >$Dir_YumRepos/CentOS-Linux-AppStream.repo
# CentOS-Linux-AppStream.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[appstream]
name=CentOS Linux $releasever - AppStream
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=AppStream&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-BaseOS.repo
# CentOS-Linux-BaseOS.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[baseos]
name=CentOS Linux $releasever - BaseOS
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=BaseOS&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-ContinuousRelease.repo
# CentOS-Linux-ContinuousRelease.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
#
# The Continuous Release (CR) repository contains packages for the next minor
# release of CentOS Linux. This repository only has content in the time period
# between an upstream release and the official CentOS Linux release. These
# packages have not been fully tested yet and should be considered beta
# quality. They are made available for people willing to test and provide
# feedback for the next release.[cr]
name=CentOS Linux $releasever - ContinuousRelease
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=cr&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/cr/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Debuginfo.repo
# CentOS-Linux-Debuginfo.repo
#
# All debug packages are merged into a single repo, split by basearch, and are
# not signed.[debuginfo]
name=CentOS Linux $releasever - Debuginfo
baseurl=http://debuginfo.centos.org/$releasever/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Devel.repo
# CentOS-Linux-Devel.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[devel]
name=CentOS Linux $releasever - Devel WARNING! FOR BUILDROOT USE ONLY!
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=Devel&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/Devel/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Extras.repo
# CentOS-Linux-Extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[extras]
name=CentOS Linux $releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-FastTrack.repo
# CentOS-Linux-FastTrack.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[fasttrack]
name=CentOS Linux $releasever - FastTrack
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/fasttrack/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-HighAvailability.repo
# CentOS-Linux-HighAvailability.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[ha]
name=CentOS Linux $releasever - HighAvailability
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=HighAvailability&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Media.repo
# CentOS-Linux-Media.repo
#
# You can use this repo to install items directly off the installation media.
# Verify your mount point matches one of the below file:// paths.[media-baseos]
name=CentOS Linux $releasever - Media - BaseOS
baseurl=file:///media/CentOS/BaseOSfile:///media/cdrom/BaseOSfile:///media/cdrecorder/BaseOS
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[media-appstream]
name=CentOS Linux $releasever - Media - AppStream
baseurl=file:///media/CentOS/AppStreamfile:///media/cdrom/AppStreamfile:///media/cdrecorder/AppStream
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Plus.repo
# CentOS-Linux-Plus.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[plus]
name=CentOS Linux $releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/centosplus/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-PowerTools.repo
# CentOS-Linux-PowerTools.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[powertools]
name=CentOS Linux $releasever - PowerTools
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=PowerTools&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$releasever/PowerTools/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Linux-Sources.repo
# CentOS-Linux-Sources.repo[baseos-source]
name=CentOS Linux $releasever - BaseOS - Source
baseurl=http://vault.centos.org/$contentdir/$releasever/BaseOS/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[appstream-source]
name=CentOS Linux $releasever - AppStream - Source
baseurl=http://vault.centos.org/$contentdir/$releasever/AppStream/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[extras-source]
name=CentOS Linux $releasever - Extras - Source
baseurl=http://vault.centos.org/$contentdir/$releasever/extras/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[plus-source]
name=CentOS Linux $releasever - Plus - Source
baseurl=http://vault.centos.org/$contentdir/$releasever/centosplus/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF;;7)cat <<'EOF' >$Dir_YumRepos/CentOS-Base.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-CR.repo
# CentOS-CR.repo
#
# The Continuous Release ( CR ) repository contains rpms that are due in the next
# release for a specific CentOS Version ( eg. next release in CentOS-7 ); these rpms
# are far less tested, with no integration checking or update path testing having
# taken place. They are still built from the upstream sources, but might not map
# to an exact upstream distro release.
#
# These packages are made available soon after they are built, for people willing
# to test their environments, provide feedback on content for the next release, and
# for people looking for early-access to next release content.
#
# The CR repo is shipped in a disabled state by default; its important that users
# understand the implications of turning this on.
#
# NOTE: We do not use a mirrorlist for the CR repos, to ensure content is available
# to everyone as soon as possible, and not need to wait for the external
# mirror network to seed first. However, many local mirrors will carry CR repos
# and if desired you can use one of these local mirrors by editing the baseurl
# line in the repo config below.
#[cr]
name=CentOS-$releasever - cr
baseurl=http://mirror.centos.org/centos/$releasever/cr/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Debuginfo.repo
# CentOS-Debug.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
## All debug packages from all the various CentOS-7 releases
# are merged into a single repo, split by BaseArch
#
# Note: packages in the debuginfo repo are currently not signed
#[base-debuginfo]
name=CentOS-7 - Debuginfo
baseurl=http://debuginfo.centos.org/7/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-7
enabled=0
#
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-fasttrack.repo
[fasttrack]
name=CentOS-7 - fasttrack
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Media.repo
# CentOS-Media.repo
#
# This repo can be used with mounted DVD media, verify the mount point for
# CentOS-7. You can use this repo and yum to install items directly off the
# DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
# yum --enablerepo=c7-media [command]
#
# or for ONLY the media repo, do this:
#
# yum --disablerepo=\* --enablerepo=c7-media [command][c7-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/file:///media/cdrom/file:///media/cdrecorder/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Sources.repo
# CentOS-Sources.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#[base-source]
name=CentOS-$releasever - Base Sources
baseurl=http://vault.centos.org/centos/$releasever/os/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#released updates
[updates-source]
name=CentOS-$releasever - Updates Sources
baseurl=http://vault.centos.org/centos/$releasever/updates/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#additional packages that may be useful
[extras-source]
name=CentOS-$releasever - Extras Sources
baseurl=http://vault.centos.org/centos/$releasever/extras/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7#additional packages that extend functionality of existing packages
[centosplus-source]
name=CentOS-$releasever - Plus Sources
baseurl=http://vault.centos.org/centos/$releasever/centosplus/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
EOF;;esac
}## 生成 CentOS Stream 官方 repo 源文件
function gen_repo_files_CentOSStream() {case "$1" in9)cat <<'EOF' >$Dir_YumRepos/centos.repo
[baseos]
name=CentOS Stream $releasever - BaseOS
#baseurl=https://mirror.stream.centos.org/$releasever-stream/BaseOS/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-baseos-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=1[baseos-debug]
name=CentOS Stream $releasever - BaseOS - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-baseos-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[baseos-source]
name=CentOS Stream $releasever - BaseOS - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-baseos-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[appstream]
name=CentOS Stream $releasever - AppStream
#baseurl=https://mirror.stream.centos.org/$releasever-stream/AppStream/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-appstream-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=1[appstream-debug]
name=CentOS Stream $releasever - AppStream - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-appstream-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[appstream-source]
name=CentOS Stream $releasever - AppStream - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-appstream-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[crb]
name=CentOS Stream $releasever - CRB
#baseurl=https://mirror.stream.centos.org/$releasever-stream/CRB/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-crb-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=0[crb-debug]
name=CentOS Stream $releasever - CRB - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-crb-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[crb-source]
name=CentOS Stream $releasever - CRB - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-crb-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0
EOFcat <<'EOF' >$Dir_YumRepos/centos-addons.repo
[highavailability]
name=CentOS Stream $releasever - HighAvailability
#baseurl=https://mirror.stream.centos.org/$releasever-stream/HighAvailability/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-highavailability-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=0[highavailability-debug]
name=CentOS Stream $releasever - HighAvailability - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-highavailability-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[highavailability-source]
name=CentOS Stream $releasever - HighAvailability - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-highavailability-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[nfv]
name=CentOS Stream $releasever - NFV
#baseurl=https://mirror.stream.centos.org/$releasever-stream/NFV/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-nfv-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=0[nfv-debug]
name=CentOS Stream $releasever - NFV - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-nfv-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[nfv-source]
name=CentOS Stream $releasever - NFV - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-nfv-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[rt]
name=CentOS Stream $releasever - RT
#baseurl=https://mirror.stream.centos.org/$releasever-stream/RT/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-rt-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=0[rt-debug]
name=CentOS Stream $releasever - RT - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-rt-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[rt-source]
name=CentOS Stream $releasever - RT - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-rt-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[resilientstorage]
name=CentOS Stream $releasever - ResilientStorage
#baseurl=https://mirror.stream.centos.org/$releasever-stream/ResilientStorage/$basearch/os/
metalink=https://mirrors.centos.org/metalink?repo=centos-resilientstorage-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=0[resilientstorage-debug]
name=CentOS Stream $releasever - ResilientStorage - Debug
metalink=https://mirrors.centos.org/metalink?repo=centos-resilientstorage-debug-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[resilientstorage-source]
name=CentOS Stream $releasever - ResilientStorage - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-resilientstorage-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0[extras-common]
name=CentOS Stream $releasever - Extras packages
#baseurl=https://mirror.stream.centos.org/SIGs/$releasever-stream/extras/$basearch/extras-common/
metalink=https://mirrors.centos.org/metalink?repo=centos-extras-sig-extras-common-$stream&arch=$basearch&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Extras-SHA512
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
countme=1
enabled=1[extras-common-source]
name=CentOS Stream $releasever - Extras packages - Source
metalink=https://mirrors.centos.org/metalink?repo=centos-extras-sig-extras-common-source-$stream&arch=source&protocol=https,http
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Extras-SHA512
gpgcheck=1
repo_gpgcheck=0
metadata_expire=6h
enabled=0
EOF;;8)cat <<'EOF' >$Dir_YumRepos/CentOS-Stream-AppStream.repo
# CentOS-Stream-AppStream.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[appstream]
name=CentOS Stream $releasever - AppStream
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=AppStream&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-BaseOS.repo
# CentOS-Stream-BaseOS.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[baseos]
name=CentOS Stream $releasever - BaseOS
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=BaseOS&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-Debuginfo.repo
# CentOS-Stream-Debuginfo.repo
#
# All debug packages are merged into a single repo, split by basearch, and are
# not signed.[debuginfo]
name=CentOS Stream $releasever - Debuginfo
baseurl=http://debuginfo.centos.org/$stream/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-Extras-common.repo
# CentOS-Stream-Extras-common.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[extras-common]
name=CentOS Stream $releasever - Extras common packages
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=extras-extras-common
#baseurl=http://mirror.centos.org/$contentdir/$stream/extras/$basearch/extras-common/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Extras
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-Extras.repo
# CentOS-Stream-Extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[extras]
name=CentOS Stream $releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-HighAvailability.repo
# CentOS-Stream-HighAvailability.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[ha]
name=CentOS Stream $releasever - HighAvailability
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=HighAvailability&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-Media.repo
# CentOS-Stream-Media.repo
#
# You can use this repo to install items directly off the installation media.
# Verify your mount point matches one of the below file:// paths.[media-baseos]
name=CentOS Stream $releasever - Media - BaseOS
baseurl=file:///media/CentOS/BaseOSfile:///media/cdrom/BaseOSfile:///media/cdrecorder/BaseOS
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[media-appstream]
name=CentOS Stream $releasever - Media - AppStream
baseurl=file:///media/CentOS/AppStreamfile:///media/cdrom/AppStreamfile:///media/cdrecorder/AppStream
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-NFV.repo
# CentOS-Stream-NFV.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[nfv]
name=CentOS Stream $releasever - NFV
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=NFV&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/NFV/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-PowerTools.repo
# CentOS-Stream-PowerTools.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[powertools]
name=CentOS Stream $releasever - PowerTools
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=PowerTools&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/PowerTools/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-RealTime.repo
# CentOS-Stream-RealTime.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[rt]
name=CentOS Stream $releasever - RealTime
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=RT&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/RT/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-ResilientStorage.repo
# CentOS-Stream-ResilientStorage.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[resilientstorage]
name=CentOS Stream $releasever - ResilientStorage
mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=ResilientStorage&infra=$infra
#baseurl=http://mirror.centos.org/$contentdir/$stream/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOFcat <<'EOF' >$Dir_YumRepos/CentOS-Stream-Sources.repo
# CentOS-Stream-Sources.repo[baseos-source]
name=CentOS Stream $releasever - BaseOS - Source
baseurl=http://vault.centos.org/$contentdir/$stream/BaseOS/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[appstream-source]
name=CentOS Stream $releasever - AppStream - Source
baseurl=http://vault.centos.org/$contentdir/$stream/AppStream/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[powertools-source]
name=CentOS Stream $releasever - PowerTools - Source
baseurl=http://vault.centos.org/$contentdir/$stream/PowerTools/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[extras-source]
name=CentOS Stream $releasever - Extras - Source
baseurl=http://vault.centos.org/$contentdir/$stream/extras/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[ha-source]
name=CentOS Stream $releasever - HighAvailability - Source
baseurl=http://vault.centos.org/$contentdir/$stream/HighAvailability/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[rt-source]
name=CentOS Stream $releasever - RT - Source
baseurl=http://vault.centos.org/$contentdir/$stream/RT/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[resilientstorage-source]
name=CentOS Stream $releasever - ResilientStorage - Source
baseurl=http://vault.centos.org/$contentdir/$stream/ResilientStorage/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial[nfv-source]
name=CentOS Stream $releasever - NFV - Source
baseurl=http://vault.centos.org/$contentdir/$stream/NFV/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF;;esac
}## 生成 Rocky Linux 官方 repo 源文件
function gen_repo_files_RockyLinux() {case "$1" in9)cat <<'EOF' >$Dir_YumRepos/rocky.repo
# rocky.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[baseos]
name=Rocky Linux $releasever - BaseOS
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[baseos-debug]
name=Rocky Linux $releasever - BaseOS - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[baseos-source]
name=Rocky Linux $releasever - BaseOS - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=BaseOS-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[appstream]
name=Rocky Linux $releasever - AppStream
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[appstream-debug]
name=Rocky Linux $releasever - AppStream - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[appstream-source]
name=Rocky Linux $releasever - AppStream - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=AppStream-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[crb]
name=Rocky Linux $releasever - CRB
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=CRB-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[crb-debug]
name=Rocky Linux $releasever - CRB - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=CRB-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[crb-source]
name=Rocky Linux $releasever - CRB - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=CRB-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/CRB/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
EOFcat <<'EOF' >$Dir_YumRepos/rocky-addons.repo
# rocky-addons.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[highavailability]
name=Rocky Linux $releasever - High Availability
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[highavailability-debug]
name=Rocky Linux $releasever - High Availability - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[highavailability-source]
name=Rocky Linux $releasever - High Availability - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=HighAvailability-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[resilientstorage]
name=Rocky Linux $releasever - Resilient Storage
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[resilientstorage-debug]
name=Rocky Linux $releasever - Resilient Storage - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[resilientstorage-source]
name=Rocky Linux $releasever - Resilient Storage - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=ResilientStorage-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[nfv]
name=Rocky Linux $releasever - NFV
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=NFV-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[nfv-debug]
name=Rocky Linux $releasever - NFV Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[nfv-source]
name=Rocky Linux $releasever - NFV Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/NFV/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[rt]
name=Rocky Linux $releasever - Realtime
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[rt-debug]
name=Rocky Linux $releasever - Realtime Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[rt-source]
name=Rocky Linux $releasever - Realtime Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[sap]
name=Rocky Linux $releasever - SAP
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[sap-debug]
name=Rocky Linux $releasever - SAP Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[sap-source]
name=Rocky Linux $releasever - SAP Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAP-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAP/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[saphana]
name=Rocky Linux $releasever - SAPHANA
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[saphana-debug]
name=Rocky Linux $releasever - SAPHANA Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[saphana-source]
name=Rocky Linux $releasever - SAPHANA Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=SAPHANA-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/SAPHANA/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
EOFcat <<'EOF' >$Dir_YumRepos/rocky-devel.repo
# rocky-devel.repo
#
# devel and no-package-left-behind[devel]
name=Rocky Linux $releasever - Devel WARNING! FOR BUILDROOT ONLY DO NOT LEAVE ENABLED
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=devel-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/devel/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
EOFcat <<'EOF' >$Dir_YumRepos/rocky-extras.repo
# rocky-extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[extras]
name=Rocky Linux $releasever - Extras
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/$basearch/os/
gpgcheck=1
enabled=1
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[extras-debug]
name=Rocky Linux $releasever - Extras Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[extras-source]
name=Rocky Linux $releasever - Extras Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[plus]
name=Rocky Linux $releasever - Plus
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=plus-$releasever$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/$basearch/os/
gpgcheck=1
enabled=0
countme=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[plus-debug]
name=Rocky Linux $releasever - Plus - Debug
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=plus-$releasever-debug$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/$basearch/debug/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9[plus-source]
name=Rocky Linux $releasever - Plus - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=plus-$releasever-source$rltype
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/source/tree/
gpgcheck=1
enabled=0
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-9
EOF;;8)cat <<'EOF' >$Dir_YumRepos/Rocky-AppStream.repo
# Rocky-AppStream.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[appstream]
name=Rocky Linux $releasever - AppStream
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-BaseOS.repo
# Rocky-BaseOS.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[baseos]
name=Rocky Linux $releasever - BaseOS
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Debuginfo.repo
# Rocky-Debuginfo.repo
#[baseos-debug]
name=Rocky Linux $releasever - BaseOS - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever-debug
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[appstream-debug]
name=Rocky Linux $releasever - AppStream - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=AppStream-$releasever-debug
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[ha-debug]
name=Rocky Linux $releasever - High Availability - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever-debug
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[powertools-debug]
name=Rocky Linux $releasever - PowerTools - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=PowerTools-$releasever-debug
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/PowerTools/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[resilient-storage-debug]
name=Rocky Linux $releasever - Resilient Storage - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever-debug
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Devel.repo
# Rocky-Devel.repo
#[devel]
name=Rocky Linux $releasever - Devel WARNING! FOR BUILDROOT AND KOJI USE
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=Devel-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/Devel/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Extras.repo
# Rocky-Extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[extras]
name=Rocky Linux $releasever - Extras
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=extras-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/$basearch/os/
gpgcheck=1
enabled=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-HighAvailability.repo
# Rocky-HighAvailability.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[ha]
name=Rocky Linux $releasever - HighAvailability
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=HighAvailability-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Media.repo
# Rocky-Media.repo
#
# You can use this repo to install items directly off the installation media.
# Verify your mount point matches one of the below file:// paths.[media-baseos]
name=Rocky Linux $releasever - Media - BaseOS
baseurl=file:///media/Rocky/BaseOSfile:///media/cdrom/BaseOSfile:///media/cdrecorder/BaseOS
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[media-appstream]
name=Rocky Linux $releasever - Media - AppStream
baseurl=file:///media/Rocky/AppStreamfile:///media/cdrom/AppStreamfile:///media/cdrecorder/AppStream
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-NFV.repo
# Rocky-NFV.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[nfv]
name=Rocky Linux $releasever - NFV
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=NFV-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/nfv/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Plus.repo
# Rocky-Plus.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[plus]
name=Rocky Linux $releasever - Plus
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=rockyplus-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/plus/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-PowerTools.repo
# Rocky-PowerTools.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[powertools]
name=Rocky Linux $releasever - PowerTools
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=PowerTools-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/PowerTools/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-ResilientStorage.repo
# Rocky-ResilientStorage.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[resilient-storage]
name=Rocky Linux $releasever - ResilientStorage
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=ResilientStorage-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-RT.repo
# Rocky-RT.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client. You should use this for Rocky updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.[rt]
name=Rocky Linux $releasever - Realtime
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=RT-$releasever
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/RT/$basearch/os/
gpgcheck=1
enabled=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOFcat <<'EOF' >$Dir_YumRepos/Rocky-Sources.repo
# Rocky-Sources.repo[baseos-source]
name=Rocky Linux $releasever - BaseOS - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=BaseOS-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[appstream-source]
name=Rocky Linux $releasever - AppStream - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=AppStream-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/AppStream/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial#[extras-source]
#name=Rocky Linux $releasever - Extras - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=extras-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/extras/source/tree/
#gpgcheck=1
#enabled=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial#[plus-source]
#name=Rocky Linux $releasever - Plus - Source
#mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=plus-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/Plus/source/tree/
#gpgcheck=1
#enabled=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[ha-source]
name=Rocky Linux $releasever - High Availability - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=HighAvailability-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/HighAvailability/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[powertools-source]
name=Rocky Linux $releasever - PowerTools - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=PowerTools-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/PowerTools/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial[resilient-storage-source]
name=Rocky Linux $releasever - Resilient Storage - Source
mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=source&repo=ResilientStorage-$releasever-source
#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/ResilientStorage/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
EOF;;esac
}## 生成 AlmaLinux 官方 repo 源文件
function gen_repo_files_AlmaLinux() {case "$1" in9)cat <<'EOF' >$Dir_YumRepos/almalinux-appstream.repo
[appstream]
name=AlmaLinux $releasever - AppStream
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream
# baseurl=https://repo.almalinux.org/almalinux/$releasever/AppStream/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=1[appstream-debug]
name=AlmaLinux $releasever - AppStream - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/AppStream/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[appstream-source]
name=AlmaLinux $releasever - AppStream - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream-source
# baseurl=https://repo.almalinux.org/vault/$releasever/AppStream/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-baseos.repo
[baseos]
name=AlmaLinux $releasever - BaseOS
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos
# baseurl=https://repo.almalinux.org/almalinux/$releasever/BaseOS/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=1[baseos-debug]
name=AlmaLinux $releasever - BaseOS - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/BaseOS/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[baseos-source]
name=AlmaLinux $releasever - BaseOS - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos-source
# baseurl=https://repo.almalinux.org/vault/$releasever/BaseOS/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-crb.repo
[crb]
name=AlmaLinux $releasever - CRB
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/crb
# baseurl=https://repo.almalinux.org/almalinux/$releasever/CRB/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[crb-debug]
name=AlmaLinux $releasever - CRB - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/crb-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/CRB/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[crb-source]
name=AlmaLinux $releasever - CRB - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/crb-source
# baseurl=https://repo.almalinux.org/vault/$releasever/CRB/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-extras.repo
[extras]
name=AlmaLinux $releasever - Extras
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras
# baseurl=https://repo.almalinux.org/almalinux/$releasever/extras/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[extras-debug]
name=AlmaLinux $releasever - Extras - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/extras/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[extras-source]
name=AlmaLinux $releasever - Extras - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras-source
# baseurl=https://repo.almalinux.org/vault/$releasever/extras/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-highavailability.repo
[highavailability]
name=AlmaLinux $releasever - HighAvailability
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/highavailability
# baseurl=https://repo.almalinux.org/almalinux/$releasever/HighAvailability/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[highavailability-debug]
name=AlmaLinux $releasever - HighAvailability - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/highavailability-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/HighAvailability/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[highavailability-source]
name=AlmaLinux $releasever - HighAvailability - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/highavailability-source
# baseurl=https://repo.almalinux.org/vault/$releasever/HighAvailability/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-nfv.repo
[nfv]
name=AlmaLinux $releasever - NFV
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv
# baseurl=https://repo.almalinux.org/almalinux/$releasever/NFV/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[nfv-debug]
name=AlmaLinux $releasever - NFV - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/NFV/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[nfv-source]
name=AlmaLinux $releasever - NFV - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv-source
# baseurl=https://repo.almalinux.org/vault/$releasever/NFV/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-plus.repo
[plus]
name=AlmaLinux $releasever - Plus
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus
# baseurl=https://repo.almalinux.org/almalinux/$releasever/plus/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[plus-debug]
name=AlmaLinux $releasever - Plus - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/plus/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[plus-source]
name=AlmaLinux $releasever - Plus - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus-source
# baseurl=https://repo.almalinux.org/vault/$releasever/plus/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-resilientstorage.repo
[resilientstorage]
name=AlmaLinux $releasever - ResilientStorage
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage
# baseurl=https://repo.almalinux.org/almalinux/$releasever/ResilientStorage/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[resilientstorage-debug]
name=AlmaLinux $releasever - ResilientStorage - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/ResilientStorage/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[resilientstorage-source]
name=AlmaLinux $releasever - ResilientStorage - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage-source
# baseurl=https://repo.almalinux.org/vault/$releasever/ResilientStorage/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-rt.repo
[rt]
name=AlmaLinux $releasever - RT
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt
# baseurl=https://repo.almalinux.org/almalinux/$releasever/RT/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[rt-debug]
name=AlmaLinux $releasever - RT - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/RT/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[rt-source]
name=AlmaLinux $releasever - RT - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt-source
# baseurl=https://repo.almalinux.org/vault/$releasever/RT/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-sap.repo
[sap]
name=AlmaLinux $releasever - SAP
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap
# baseurl=https://repo.almalinux.org/almalinux/$releasever/SAP/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[sap-debug]
name=AlmaLinux $releasever - SAP - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/SAP/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[sap-source]
name=AlmaLinux $releasever - SAP - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap-source
# baseurl=https://repo.almalinux.org/vault/$releasever/SAP/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-saphana.repo
[saphana]
name=AlmaLinux $releasever - SAPHANA
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana
# baseurl=https://repo.almalinux.org/almalinux/$releasever/SAPHANA/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[saphana-debug]
name=AlmaLinux $releasever - SAPHANA - Debug
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana-debug
# baseurl=https://repo.almalinux.org/vault/$releasever/SAPHANA/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0[saphana-source]
name=AlmaLinux $releasever - SAPHANA - Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana-source
# baseurl=https://repo.almalinux.org/vault/$releasever/SAPHANA/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
metadata_expire=86400
enabled_metadata=0
EOF;;8)cat <<'EOF' >$Dir_YumRepos/almalinux-ha.repo
# almalinux-ha.repo[ha]
name=AlmaLinux $releasever - HighAvailability
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/ha
# baseurl=https://repo.almalinux.org/almalinux/$releasever/HighAvailability/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[ha-source]
name=AlmaLinux $releasever - HighAvailability Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/ha-source
# baseurl=https://repo.almalinux.org/vault/$releasever/HighAvailability/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[ha-debuginfo]
name=AlmaLinux $releasever - HighAvailability debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/ha-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/HighAvailability/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-nfv.repo
# almalinux-nfv.repo[nfv]
name=AlmaLinux $releasever - Real Time for NFV
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv
# baseurl=https://repo.almalinux.org/almalinux/$releasever/NFV/$basearch/os/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[nfv-source]
name=AlmaLinux $releasever - Real Time for NFV Sources
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv-source
# baseurl=https://repo.almalinux.org/vault/$releasever/NFV/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[nfv-debuginfo]
name=AlmaLinux $releasever - Real Time for NFV Debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/nfv-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/NFV/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-plus.repo
# almalinux-plus.repo[plus]
name=AlmaLinux $releasever - Plus
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus
# baseurl=https://repo.almalinux.org/almalinux/$releasever/plus/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[plus-source]
name=AlmaLinux $releasever - Plus Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus-source
# baseurl=https://repo.almalinux.org/vault/$releasever/plus/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[plus-debuginfo]
name=AlmaLinux $releasever - Plus debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/plus-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/plus/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-powertools.repo
# almalinux-powertools.repo[powertools]
name=AlmaLinux $releasever - PowerTools
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/powertools
# baseurl=https://repo.almalinux.org/almalinux/$releasever/PowerTools/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[powertools-source]
name=AlmaLinux $releasever - PowerTools Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/powertools-source
# baseurl=https://repo.almalinux.org/vault/$releasever/PowerTools/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[powertools-debuginfo]
name=AlmaLinux $releasever - PowerTools debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/powertools-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/PowerTools/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-resilientstorage.repo
# almalinux-resilientstorage.repo[resilientstorage]
name=AlmaLinux $releasever - ResilientStorage
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage
# baseurl=https://repo.almalinux.org/almalinux/$releasever/ResilientStorage/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[resilientstorage-source]
name=AlmaLinux $releasever - ResilientStorage Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage-source
# baseurl=https://repo.almalinux.org/vault/$releasever/ResilientStorage/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[resilientstorage-debuginfo]
name=AlmaLinux $releasever - ResilientStorage debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/resilientstorage-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/ResilientStorage/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-rt.repo
# almalinux-rt.repo[rt]
name=AlmaLinux $releasever - Real Time
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt
# baseurl=https://repo.almalinux.org/almalinux/$releasever/RT/$basearch/os/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[rt-source]
name=AlmaLinux $releasever - Real Time Sources
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt-source
# baseurl=https://repo.almalinux.org/vault/$releasever/RT/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[rt-debuginfo]
name=AlmaLinux $releasever - Real Time Debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/rt-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/RT/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-sap.repo
# almalinux-sap.repo[sap]
name=AlmaLinux $releasever - SAP
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap
# baseurl=https://repo.almalinux.org/almalinux/$releasever/SAP/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[sap-source]
name=AlmaLinux $releasever - SAP Sources
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap-source
# baseurl=https://repo.almalinux.org/vault/$releasever/SAP/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[sap-debuginfo]
name=AlmaLinux $releasever - SAP Debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/sap-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/SAP/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux-saphana.repo
# almalinux-saphana.repo[saphana]
name=AlmaLinux $releasever - SAP HANA
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana
# baseurl=https://repo.almalinux.org/almalinux/$releasever/SAPHANA/$basearch/os/
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[saphana-source]
name=AlmaLinux $releasever - SAP HANA Sources
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana-source
# baseurl=https://repo.almalinux.org/vault/$releasever/SAPHANA/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[saphana-debuginfo]
name=AlmaLinux $releasever - SAP HANA Debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/saphana-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/SAPHANA/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOFcat <<'EOF' >$Dir_YumRepos/almalinux.repo
# almalinux.repo[baseos]
name=AlmaLinux $releasever - BaseOS
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos
# baseurl=https://repo.almalinux.org/almalinux/$releasever/BaseOS/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[appstream]
name=AlmaLinux $releasever - AppStream
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream
# baseurl=https://repo.almalinux.org/almalinux/$releasever/AppStream/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[extras]
name=AlmaLinux $releasever - Extras
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras
# baseurl=https://repo.almalinux.org/almalinux/$releasever/extras/$basearch/os/
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Sources
[baseos-source]
name=AlmaLinux $releasever - BaseOS Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos-source
# baseurl=https://repo.almalinux.org/vault/$releasever/BaseOS/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[appstream-source]
name=AlmaLinux $releasever - AppStream Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream-source
# baseurl=https://repo.almalinux.org/vault/$releasever/AppStream/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[extras-source]
name=AlmaLinux $releasever - Extras Source
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras-source
# baseurl=https://repo.almalinux.org/vault/$releasever/extras/Source/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux## Debuginfo
[baseos-debuginfo]
name=AlmaLinux $releasever - BaseOS debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/BaseOS/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[appstream-debuginfo]
name=AlmaLinux $releasever - AppStream debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/AppStream/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux[extras-debuginfo]
name=AlmaLinux $releasever - Extras debuginfo
mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras-debuginfo
# baseurl=https://repo.almalinux.org/vault/$releasever/extras/debug/$basearch/
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux
EOF;;esac
}## 生成 Fedora 官方 repo 源文件
function gen_repo_files_Fedora() {cat <<'EOF' >$Dir_YumRepos/fedora.repo
[fedora]
name=Fedora $releasever - $basearch
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Everything/$basearch/os/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch
enabled=1
countme=1
metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[fedora-debuginfo]
name=Fedora $releasever - $basearch - Debug
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Everything/$basearch/debug/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-debug-$releasever&arch=$basearch
enabled=0
metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[fedora-source]
name=Fedora $releasever - Source
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Everything/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-source-$releasever&arch=$basearch
enabled=0
metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOFcat <<'EOF' >$Dir_YumRepos/fedora-updates.repo
[updates]
name=Fedora $releasever - $basearch - Updates
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Everything/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-f$releasever&arch=$basearch
enabled=1
countme=1
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-debuginfo]
name=Fedora $releasever - $basearch - Updates - Debug
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Everything/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-debug-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-source]
name=Fedora $releasever - Updates Source
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Everything/SRPMS/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-source-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOFcat <<'EOF' >$Dir_YumRepos/fedora-updates-testing.repo
[updates-testing]
name=Fedora $releasever - $basearch - Test Updates
#baseurl=http://download.example/pub/fedora/linux/updates/testing/$releasever/Everything/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-f$releasever&arch=$basearch
enabled=0
countme=1
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-testing-debuginfo]
name=Fedora $releasever - $basearch - Test Updates Debug
#baseurl=http://download.example/pub/fedora/linux/updates/testing/$releasever/Everything/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-debug-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-testing-source]
name=Fedora $releasever - Test Updates Source
#baseurl=http://download.example/pub/fedora/linux/updates/testing/$releasever/Everything/SRPMS/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-source-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOF## 自 Fedora 39 起不再使用 modular 仓库if [[ $1 -lt 39 ]]; thencat <<'EOF' >$Dir_YumRepos/fedora-modular.repo
[fedora-modular]
name=Fedora Modular $releasever - $basearch
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Modular/$basearch/os/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-modular-$releasever&arch=$basearch
enabled=1
countme=1
#metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[fedora-modular-debuginfo]
name=Fedora Modular $releasever - $basearch - Debug
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Modular/$basearch/debug/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-modular-debug-$releasever&arch=$basearch
enabled=0
metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[fedora-modular-source]
name=Fedora Modular $releasever - Source
#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Modular/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-modular-source-$releasever&arch=$basearch
enabled=0
metadata_expire=7d
repo_gpgcheck=0
type=rpm
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOFcat <<'EOF' >$Dir_YumRepos/fedora-updates-modular.repo
[updates-modular]
name=Fedora Modular $releasever - $basearch - Updates
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Modular/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-modular-f$releasever&arch=$basearch
enabled=1
countme=1
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-modular-debuginfo]
name=Fedora Modular $releasever - $basearch - Updates - Debug
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Modular/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-modular-debug-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-modular-source]
name=Fedora Modular $releasever - Updates Source
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Modular/SRPMS/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-modular-source-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOFcat <<'EOF' >$Dir_YumRepos/fedora-updates-testing-modular.repo
[updates-testing-modular]
name=Fedora Modular $releasever - $basearch - Test Updates
#baseurl=http://download.example/pub/fedora/linux/updates/testing/$releasever/Modular/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-modular-f$releasever&arch=$basearch
enabled=0
countme=1
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-testing-modular-debuginfo]
name=Fedora Modular $releasever - $basearch - Test Updates Debug
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Modular/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-modular-debug-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False[updates-testing-modular-source]
name=Fedora Modular $releasever - Test Updates Source
#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Modular/SRPMS/
metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-testing-modular-source-f$releasever&arch=$basearch
enabled=0
repo_gpgcheck=0
type=rpm
gpgcheck=1
metadata_expire=6h
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
skip_if_unavailable=False
EOFfi
}## 生成 OpenCloudOS 官方 repo 源文件
function gen_repo_files_OpenCloudOS() {case "$1" in9)cat <<'EOF' >$Dir_YumRepos/OpenCloudOS.repo
[BaseOS]
name=BaseOS $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[AppStream]
name=AppStream $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[extras]
name=extras $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[BaseOS-debuginfo]
name=BaseOS-debuginfo $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[AppStream-debuginfo]
name=AppStream-debuginfo $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[extras-debuginfo]
name=extras-debuginfo $releasever - $basearch
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/extras/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[BaseOS-source]
name=BaseOS-source $releasever
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[AppStream-source]
name=AppStream-source $releasever
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9[extras-source]
name=extras-source $releasever
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/extras/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS-9
EOF;;8)cat <<'EOF' >$Dir_YumRepos/OpenCloudOS-Debuginfo.repo
# OpenCloudOS-Debuginfo.repo
#
# Author: OpenCloudOS <infrastructure@opencloudos.tech>
#
[BaseOS-debuginfo]
name=OpenCloudOS $releasever - BaseOS-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[AppStream-debuginfo]
name=OpenCloudOS $releasever - AppStream-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Extras-debuginfo]
name=OpenCloudOS $releasever - Extras-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Extras/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[HighAvailability-debuginfo]
name=OpenCloudOS $releasever - HighAvailability-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/HighAvailability/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[PowerTools-debuginfo]
name=OpenCloudOS $releasever - PowerTools-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/PowerTools/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[ResilientStorage-debuginfo]
name=OpenCloudOS $releasever - ResilientStorage-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/ResilientStorage/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Plus-debuginfo]
name=OpenCloudOS $releasever - Plus-debuginfo
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Plus/$basearch/debug/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS
EOFcat <<'EOF' >$Dir_YumRepos/OpenCloudOS.repo
# OpenCloudOS.repo
#
# Author: OpenCloudOS <infrastructure@opencloudos.tech>
#
[BaseOS]
name=OpenCloudOS $releasever - BaseOS
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[AppStream]
name=OpenCloudOS $releasever - AppStream
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Extras]
name=OpenCloudOS $releasever - Extras
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[HighAvailability]
name=OpenCloudOS $releasever - HighAvailability
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/HighAvailability/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[PowerTools]
name=OpenCloudOS $releasever - PowerTools
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/PowerTools/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[ResilientStorage]
name=OpenCloudOS $releasever - ResilientStorage
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/ResilientStorage/$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Plus]
name=OpenCloudOS $releasever - Plus
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Plus/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS
EOFcat <<'EOF' >$Dir_YumRepos/OpenCloudOS-Sources.repo
# OpenCloudOS-Sources.repo
#
# Author: OpenCloudOS <infrastructure@opencloudos.tech>
#
[BaseOS-source]
name=OpenCloudOS $releasever - Base-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/BaseOS/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[AppStream-source]
name=OpenCloudOS $releasever - AppStream-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/AppStream/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Extras-source]
name=OpenCloudOS $releasever - Extras-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Extras/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[HighAvailability-source]
name=OpenCloudOS $releasever - HighAvailability-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/HighAvailability/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[PowerTools-source]
name=OpenCloudOS $releasever - PowerTools-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/PowerTools/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[ResilientStorage-source]
name=OpenCloudOS $releasever - ResilientStorage-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/ResilientStorage/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS[Plus-source]
name=OpenCloudOS $releasever - Plus-source
baseurl=https://mirrors.opencloudos.tech/opencloudos/$releasever/Plus/source/tree/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-OpenCloudOS
EOF;;esac
}## 生成 openEuler 官方 repo 源文件
function gen_repo_files_openEuler() {cat <<'EOF' >$Dir_YumRepos/openEuler.repo
#generic-repos is licensed under the Mulan PSL v2.
#You can use this software according to the terms and conditions of the Mulan PSL v2.
#You may obtain a copy of Mulan PSL v2 at:
# http://license.coscl.org.cn/MulanPSL2
#THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
#IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
#PURPOSE.
#See the Mulan PSL v2 for more details.[OS]
name=OS
baseurl=http://repo.openeuler.org/openEuler-version/OS/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/OS/$basearch/RPM-GPG-KEY-openEuler[everything]
name=everything
baseurl=http://repo.openeuler.org/openEuler-version/everything/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/everything/$basearch/RPM-GPG-KEY-openEuler[EPOL]
name=EPOL
baseurl=http://repo.openeuler.org/openEuler-version/EPOL/main/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/OS/$basearch/RPM-GPG-KEY-openEuler[debuginfo]
name=debuginfo
baseurl=http://repo.openeuler.org/openEuler-version/debuginfo/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/debuginfo/$basearch/RPM-GPG-KEY-openEuler[source]
name=source
baseurl=http://repo.openeuler.org/openEuler-version/source/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/source/RPM-GPG-KEY-openEuler[update]
name=update
baseurl=http://repo.openeuler.org/openEuler-version/update/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/OS/$basearch/RPM-GPG-KEY-openEuler[update-source]
name=update-source
baseurl=http://repo.openeuler.org/openEuler-version/update/source/
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-version/source/RPM-GPG-KEY-openEuler
EOF
}## 生成 openSUSE 官方 repo 源文件
function gen_repo_files_openSUSE() {case "$1" in"leap")case "$2" in15.[0-2])cat <<'EOF' >$Dir_openSUSERepos/repo-debug-non-oss.repo
[repo-debug-non-oss]
name=Debug Repository (Non-OSS)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/distribution/leap/$releasever/repo/non-oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug.repo
[repo-debug]
name=Debug Repository
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/distribution/leap/$releasever/repo/oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug-update-non-oss.repo
[repo-debug-update-non-oss]
name=Update Repository (Debug, Non-OSS)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/update/leap/$releasever/non-oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug-update.repo
[repo-debug-update]
name=Update Repository (Debug)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/update/leap/$releasever/oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-non-oss.repo
[repo-non-oss]
name=Non-OSS Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/non-oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-oss.repo
[repo-oss]
name=Main Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-source-non-oss.repo
[repo-source-non-oss]
name=Source Repository (Non-OSS)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/source/distribution/leap/$releasever/repo/non-oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-source.repo
[repo-source]
name=Source Repository
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/source/distribution/leap/$releasever/repo/oss/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-update-non-oss.repo
[repo-update-non-oss]
name=Update Repository (Non-Oss)
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/non-oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-update.repo
[repo-update]
name=Main Update Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/oss/
type=rpm-md
keeppackages=0
EOF;;*)cat <<'EOF' >$Dir_openSUSERepos/repo-backports-debug-update.repo
[repo-backports-debug-update]
name=Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/backports_debug/
type=NONE
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-backports-update.repo
[repo-backports-update]
name=Update repository of openSUSE Backports
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/backports/
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug-non-oss.repo
[repo-debug-non-oss]
name=Debug Repository (Non-OSS)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/distribution/leap/$releasever/repo/non-oss/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug.repo
[repo-debug]
name=Debug Repository
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/distribution/leap/$releasever/repo/oss/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug-update-non-oss.repo
[repo-debug-update-non-oss]
name=Update Repository (Debug, Non-OSS)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/update/leap/$releasever/non-oss/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-debug-update.repo
[repo-debug-update]
name=Update Repository (Debug)
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/update/leap/$releasever/oss/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-non-oss.repo
[repo-non-oss]
name=Non-OSS Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/non-oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-oss.repo
[repo-oss]
name=Main Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-sle-debug-update.repo
[repo-sle-debug-update]
name=Update repository with debuginfo for updates from SUSE Linux Enterprise 15
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/update/leap/$releasever/sle/
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-sle-update.repo
[repo-sle-update]
name=Update repository with updates from SUSE Linux Enterprise 15
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/sle/
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-source.repo
[repo-source]
name=Source Repository
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/source/distribution/leap/$releasever/repo/oss/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-update-non-oss.repo
[repo-update-non-oss]
name=Update Repository (Non-Oss)
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/non-oss/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-update.repo
[repo-update]
name=Main Update Repository
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/leap/$releasever/oss/
type=rpm-md
keeppackages=0
EOF;;esac;;"tumbleweed")cat <<'EOF' >$Dir_openSUSERepos/repo-debug.repo
[repo-debug]
name=openSUSE-Tumbleweed-Debug
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/debug/tumbleweed/repo/oss/
path=/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-non-oss.repo
[repo-non-oss]
name=openSUSE-Tumbleweed-Non-Oss
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/tumbleweed/repo/non-oss/
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-openh264.repo
[repo-openh264]
name=Open H.264 Codec (openSUSE Tumbleweed)
enabled=1
autorefresh=1
baseurl=http://codecs.opensuse.org/openh264/openSUSE_Tumbleweed
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-oss.repo
[repo-oss]
name=openSUSE-Tumbleweed-Oss
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/tumbleweed/repo/oss/
path=/
type=rpm-md
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-source.repo
[repo-source]
name=openSUSE-Tumbleweed-Source
enabled=0
autorefresh=1
baseurl=http://download.opensuse.org/source/tumbleweed/repo/oss/
path=/
keeppackages=0
EOFcat <<'EOF' >$Dir_openSUSERepos/repo-update.repo
[repo-update]
name=openSUSE-Tumbleweed-Update
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/update/tumbleweed/
path=/
type=rpm-md
keeppackages=0
EOF;;esac
}## 生成 EPEL 附加软件包官方 repo 源文件
function gen_repo_files_EPEL() {case ${SYSTEM_VERSION_NUMBER:0:1} in9)cat <<'EOF' >$Dir_YumRepos/epel.repo
[epel]
name=Extra Packages for Enterprise Linux $releasever - $basearch
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/$releasever/Everything/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever[epel-debuginfo]
name=Extra Packages for Enterprise Linux $releasever - $basearch - Debug
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/$releasever/Everything/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
gpgcheck=1[epel-source]
name=Extra Packages for Enterprise Linux $releasever - $basearch - Source
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/$releasever/Everything/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-source-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
gpgcheck=1
EOFcat <<'EOF' >$Dir_YumRepos/epel-testing.repo
[epel-testing]
name=Extra Packages for Enterprise Linux $releasever - Testing - $basearch
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/$releasever/Everything/$basearch/
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-epel$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever[epel-testing-debuginfo]
name=Extra Packages for Enterprise Linux $releasever - Testing - $basearch - Debug
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/$releasever/Everything/$basearch/debug/
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
gpgcheck=1[epel-testing-source]
name=Extra Packages for Enterprise Linux $releasever - Testing - $basearch - Source
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/$releasever/Everything/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
gpgcheck=1
EOF## 此仓库特殊，默认不启用cat <<'EOF' >$Dir_YumRepos/epel-cisco-openh264.repo
[epel-cisco-openh264]
name=Extra Packages for Enterprise Linux $releasever openh264 (From Cisco) - $basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-cisco-openh264-$releasever&arch=$basearch
type=rpm
enabled=0
metadata_expire=14d
repo_gpgcheck=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
skip_if_unavailable=True[epel-cisco-openh264-debuginfo]
name=Extra Packages for Enterprise Linux $releasever openh264 (From Cisco) - $basearch - Debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-cisco-openh264-debug-$releasever&arch=$basearch
type=rpm
enabled=0
metadata_expire=14d
repo_gpgcheck=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
skip_if_unavailable=True[epel-cisco-openh264-source]
name=Extra Packages for Enterprise Linux $releasever openh264 (From Cisco) - $basearch - Source
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-cisco-openh264-source-$releasever&arch=$basearch
type=rpm
enabled=0
metadata_expire=14d
repo_gpgcheck=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever
skip_if_unavailable=True
EOF;;8)cat <<'EOF' >$Dir_YumRepos/epel.repo
[epel]
name=Extra Packages for Enterprise Linux 8 - $basearch
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/8/Everything/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=1
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8[epel-debuginfo]
name=Extra Packages for Enterprise Linux 8 - $basearch - Debug
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/8/Everything/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1[epel-source]
name=Extra Packages for Enterprise Linux 8 - $basearch - Source
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place it's address here.
#baseurl=https://download.example/pub/epel/8/Everything/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-source-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1
EOFcat <<'EOF' >$Dir_YumRepos/epel-testing.repo
[epel-testing]
name=Extra Packages for Enterprise Linux 8 - Testing - $basearch
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/8/Everything/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8[epel-testing-debuginfo]
name=Extra Packages for Enterprise Linux 8 - Testing - $basearch - Debug
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/8/Everything/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1[epel-testing-source]
name=Extra Packages for Enterprise Linux 8 - Testing - $basearch - Source
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place it's address here.
#baseurl=https://download.example/pub/epel/testing/8/Everything/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1
EOFcat <<'EOF' >$Dir_YumRepos/epel-modular.repo
[epel-modular]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - $basearch - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/8/Modular/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-modular-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8[epel-modular-debuginfo]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - $basearch - Debug - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/8/Modular/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-modular-debug-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1[epel-modular-source]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - $basearch - Source - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place it's address here.
#baseurl=https://download.example/pub/epel/8/Modular/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-modular-source-8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1
EOFcat <<'EOF' >$Dir_YumRepos/epel-testing-modular.repo
[epel-testing-modular]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - Testing - $basearch - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/8/Modular/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-modular-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgcheck=1
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8[epel-testing-modular-debuginfo]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - Testing - $basearch - Debug - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place its address here.
#baseurl=https://download.example/pub/epel/testing/8/Modular/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-modular-debug-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1[epel-testing-modular-source]
# This repo has been RETIRED, see https://pagure.io/epel/issue/198 for more details.
name=Extra Packages for Enterprise Linux Modular 8 - Testing - $basearch - Source - RETIRED
# It is much more secure to use the metalink, but if you wish to use a local mirror
# place it's address here.
#baseurl=https://download.example/pub/epel/testing/8/Modular/source/tree/
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-modular-source-epel8&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=1
EOF;;7)cat <<'EOF' >$Dir_YumRepos/epel.repo
[epel]
name=Extra Packages for Enterprise Linux 7 - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$basearch
failovermethod=priority
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7[epel-debuginfo]
name=Extra Packages for Enterprise Linux 7 - $basearch - Debug
#baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-7&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
gpgcheck=1[epel-source]
name=Extra Packages for Enterprise Linux 7 - $basearch - Source
#baseurl=http://download.fedoraproject.org/pub/epel/7/SRPMS
metalink=https://mirrors.fedoraproject.org/metalink?repo=epel-source-7&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
gpgcheck=1
EOFcat <<'EOF' >$Dir_YumRepos/epel-testing.repo
[epel-testing]
name=Extra Packages for Enterprise Linux 7 - Testing - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/testing/7/$basearch
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-epel7&arch=$basearch
failovermethod=priority
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7[epel-testing-debuginfo]
name=Extra Packages for Enterprise Linux 7 - Testing - $basearch - Debug
#baseurl=http://download.fedoraproject.org/pub/epel/testing/7/$basearch/debug
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel7&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
gpgcheck=1[epel-testing-source]
name=Extra Packages for Enterprise Linux 7 - Testing - $basearch - Source
#baseurl=http://download.fedoraproject.org/pub/epel/testing/7/SRPMS
metalink=https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel7&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
gpgcheck=1
EOF;;esac
}##############################################################################handle_command_options "$@"
main
参考：https://github.com/SuperManito/LinuxMirrors
https://gitee.com/SuperManito/LinuxMirrors
三、yum其它
1. 安装包key错误：GPG key retrieval failed: [Errno 14] curl#37 - "Couldn't open file /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7"
解决：
cd /etc/pki/rpm-gpg/ && wget https://archive.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL-7
2. yum下载软件包 or 依赖包，不安装
方法一：yumdownloader
如果只想通过 yum 下载软件的软件包，但是不需要进行安装的话，可以使用 yumdownloader 命令； yumdownloader 命令在软件包 yum-utils 里面。
# yum install yum-utils -y
常用参数说明：
--destdir 指定下载的软件包存放路径
--resolve 解决依赖关系并下载所需的包
示例：
# yumdownloader --destdir=/tmp --resolve httpd
参考链接：https://www.cnblogs.com/yanjieli/p/10725360.html
3. yum查询某个命令属于哪个软件包
yum whatprovides */ifconfig
yum安装本地rpm包
yum localinstall mysql-community-*
![[HTML/Web] HTML5之`Video`元素](https://blog-static.cnblogs.com/files/johnnyzen/cnblogs-qq-group-qrcode.gif?t=1679679148)
